MDCGPower AC Power Cord Cable User Manual

Introduction

This manual provides essential instructions for the safe and effective use of your MDCGPower AC Power Cord Cable, model MD094PC961. This power cord is designed for compatibility with the QFX PBX-61151 Battery Powered Bluetooth PA Speaker, ensuring a reliable power connection. Please read this manual thoroughly before use to ensure proper operation and longevity of the product.

Setup Instructions

1. Verify Compatibility: Before connecting, ensure that your device, specifically the QFX PBX-61151 Battery Powered Bluetooth PA Speaker, requires a 2-prong AC power cord with a figure-8 (C7) connector.
2. Inspect the Cable: Visually inspect the power cord for any signs of damage, such as cuts, frayed wires, or bent prongs. Do not use a damaged cable.
3. Connect to Device: Insert the figure-8 (C7) end of the power cord firmly into the corresponding power input port on your QFX PBX-61151 speaker.
4. Connect to Power Outlet: Insert the 2-prong (NEMA 1-15P) end of the power cord into a standard 120-volt AC wall outlet. Ensure the outlet is easily accessible and in good condition.
5. Secure Connection: Confirm both ends of the power cord are securely seated to prevent intermittent power supply or disconnections.

Operation

The MDCGPower AC Power Cord Cable is designed for simple plug-and-play operation. Once properly connected to your QFX PBX-61151 speaker and a power outlet, the speaker should receive power. No additional configuration or software is required for the power cord itself.

• Ensure the power cord is not kinked or placed under heavy objects.
• Avoid pulling the cord by the cable itself; always grasp the plug when disconnecting.

Care and Maintenance

• Cleaning: Disconnect the power cord from both the device and the wall outlet before cleaning. Wipe the cable and connectors with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, coil the power cord loosely. Avoid tight coiling or bending, which can damage the internal wires. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically inspect the power cord for any signs of wear, damage, or overheating. Replace the cord immediately if any damage is observed.

Troubleshooting

If you experience issues with your MDCGPower AC Power Cord Cable, consider the following:

• No Power to Device:
  • Ensure both ends of the power cord are fully inserted into the device and the wall outlet.
  • Check if the wall outlet is functional by plugging in another device.
  • Verify that the QFX PBX-61151 speaker's power switch is in the 'ON' position.
  • Inspect the power cord for visible damage. If damaged, discontinue use and replace.
• Loose Connection:
  • If the connection feels loose, gently re-insert the plugs.
  • Ensure the device's power input port is clean and free of debris.

Specifications

Warranty and Support

For information regarding warranty coverage or technical support, please refer to the documentation provided with your original purchase or contact MDCGPower customer service directly.