1. Introduction
Thank you for choosing the Hey-brother Cat Tree Tower MPJ070G. This multi-level cat tree is designed to provide a comfortable and engaging environment for your feline companions, especially large adult cats and Maine Coons. It features enlarged platforms, a spacious condo, cozy hammocks, and a self-grooming brush to satisfy your cat's natural instincts for play, rest, and grooming.
Please read this manual carefully before assembly and use to ensure proper setup and safe operation.
2. Safety Information
- Ensure all parts are securely fastened during assembly to prevent instability.
- Place the cat tree on a flat, stable surface to minimize the risk of tipping.
- Utilize the included anti-tip straps to secure the cat tree to a wall, especially if you have multiple or very active cats.
- Regularly inspect the cat tree for loose parts, wear, or damage. Tighten screws and replace worn components as needed.
- Keep small children away from the assembly area to avoid choking hazards from small parts.
- This product is designed for indoor use only.
- Do not allow cats to chew on non-sisal components, as this could lead to ingestion of materials.
3. Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
| Component | Quantity |
|---|---|
| Base Board | 1 |
| Platforms (various sizes) | Multiple |
| Cat Condo | 1 |
| Hammocks | 2 |
| Scratching Posts (Sisal-wrapped) | Multiple |
| Self-Grooming Brush | 1 |
| Dangling Balls/Toys | 2 |
| Hardware Pack (screws, bolts, Allen wrench) | 1 |
| Anti-tip Straps | 1 Set |
| Instruction Manual | 1 |
4. Assembly Instructions
Follow these steps carefully to assemble your cat tree. It is recommended to have a second person assist with assembly for stability.
- Unpack and Identify Parts: Lay out all components and hardware. Refer to the parts list to ensure everything is present.
- Attach Base Posts: Secure the first set of scratching posts to the base board using the provided screws and Allen wrench. Ensure they are tightened firmly.
- Install First Platform: Place the first large platform onto the attached posts and secure it with screws from underneath.
- Assemble Condo: Construct the cat condo walls and roof, then attach it to the first platform.
- Add Second Level Posts and Platform: Continue by attaching the next set of scratching posts to the first platform, then secure the second platform on top.
- Attach Hammocks: Fasten the two hammocks to the designated points on the structure, ensuring they are securely suspended.
- Install Upper Posts and Top Perch: Attach the remaining scratching posts and then the top perch, which serves as an extra-large platform.
- Mount Self-Grooming Brush: Secure the self-grooming brush to one of the lower posts or the side of the condo as desired.
- Attach Dangling Toys: Hook the dangling balls to the designated loops on the platforms.
- Final Tightening and Stability Check: Once fully assembled, re-tighten all screws. Gently shake the cat tree to ensure it is stable.
- Secure with Anti-Tip Straps: Attach the anti-tip straps to the top of the cat tree and secure them to a wall stud using appropriate hardware (not always included, may require separate purchase depending on wall type).
Figure 4.1: Fully assembled Hey-brother Cat Tree Tower MPJ070G, showcasing its multi-level design with platforms, condo, and hammocks.
Video 4.2: An overview of the Hey-brother Cat Tree, demonstrating its features and suitability for Maine Coon cats. This video is provided by the seller.
5. Operating Instructions (Usage)
The Hey-brother Cat Tree Tower is designed to provide a comprehensive activity center for your cats.
- Climbing and Exploration: The tiered design and multiple platforms allow cats of all ages, including kittens and elderly cats, to easily climb and explore.
- Scratching: The sisal-wrapped posts are intended for scratching, helping to maintain claw health and redirect scratching behavior away from furniture.
- Resting and Napping: The spacious condo, large platforms, and cozy hammocks offer various comfortable spots for your cats to rest, nap, and observe their surroundings.
- Self-Grooming: The integrated self-grooming brush provides a convenient tool for your cat to rub against, helping to remove loose fur and provide a gentle massage.
- Play: Dangling toys encourage playful interaction and exercise.
Figure 5.1: A cat utilizing the integrated self-grooming brush on the cat tree.
Figure 5.2: Two cats comfortably resting in the spacious cat baskets, highlighting the ample resting zones.
Video 5.3: A demonstration of the Hey-brother Cat Tree's features, including scratching posts and resting areas. This video is provided by the seller.
6. Maintenance
Proper maintenance will extend the life of your cat tree and ensure a hygienic environment for your pets.
- Cleaning: The plush fabric components should be hand washed only. Use a mild detergent and cold water. Allow to air dry completely before reassembly or use.
- Spot Cleaning: For minor spills or stains, use a damp cloth with a pet-safe cleaner.
- Vacuuming: Regularly vacuum the cat tree to remove loose fur and dust.
- Sisal Posts: The sisal scratching posts are designed to withstand scratching. If they become heavily frayed, they may need to be replaced to maintain their effectiveness.
- Hardware Check: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cat tree is wobbly/unstable. | Loose screws; uneven surface; anti-tip straps not used. | Ensure all screws are tightened. Place on a flat, level surface. Secure with anti-tip straps to a wall. |
| Cats not using scratching posts. | Preference for other surfaces; unfamiliarity. | Encourage use with catnip spray or by gently guiding paws. Place near preferred scratching areas. |
| Dangling toys detached. | Vigorous play; loose attachment. | Re-attach securely. Consider reinforcing attachment points if frequently detached. |
| Parts missing or damaged upon arrival. | Shipping damage; packaging error. | Do not proceed with assembly. Contact customer support immediately for replacement parts. |
8. Specifications
- Model: MPJ070G
- Color: Smoky Gray
- Product Dimensions (L x W x H): 19.67" x 15.75" x 51.1" (50 cm x 40 cm x 130 cm)
- Item Weight: 30.9 Pounds (14.02 Kilograms)
- Material: Engineered Wood, Plush Fabric, Sisal
- Number of Levels: 5
- Breed Recommendation: All Breed Sizes, Large Adult Cats, Maine Coon
- Specific Uses: Climbing, Scratching, Resting
- Recommended Use: Indoor
- Mounting Type: Floor Mount (with anti-tip straps for wall attachment)
- Special Features: Anti-Scratch, Tip Resistant
Figure 8.1: Detailed dimensions of the Hey-brother Cat Tree Tower MPJ070G.
9. Warranty and Support
Warranty: This Hey-brother Cat Tree Tower MPJ070G comes with a Half Year Warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. It does not cover damage caused by misuse, accidents, or normal wear and tear.
Customer Support: For any questions, concerns, or assistance with assembly, missing parts, or warranty claims, please contact Hey-brother customer support through the retailer's platform or visit the official Hey-brother website for contact information.
Please have your model number (MPJ070G) and proof of purchase ready when contacting support.