Introduction
Thank you for choosing the VASAGLE KAILYN Collection LTS616W01 Chest of Drawers. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Information
Your safety is paramount. Please observe the following guidelines:
- Always assemble the product on a clean, flat, and soft surface to prevent scratches.
- Ensure all parts are present and undamaged before assembly. Contact customer service if any parts are missing or faulty.
- Do not overtighten screws, as this may damage the material.
- Keep small parts and packaging materials away from children and pets to prevent choking hazards.
- Always install the anti-tipping kit(s) provided. This is crucial to prevent the chest from tipping over, which can cause serious injury or death.
- Do not allow children to climb on or play with the chest of drawers.
- Distribute weight evenly across drawers and the top surface. Do not exceed the maximum weight capacities.

Package Contents
Before assembly, verify that all components listed below are included in your package. Refer to the assembly diagram for specific part identification.
- All wooden panels (labeled A, B, C, etc.)
- Hardware kit (screws, dowels, cam locks, drawer slides, etc.)
- Anti-tipping kit (2 sets)
- Assembly tools (e.g., screwdriver, Allen key - may vary)
Setup and Assembly
Follow these step-by-step instructions carefully for proper assembly. It is recommended to have two people for assembly.
- Prepare the Area: Clear a spacious, flat, and clean area. Lay down a blanket or cardboard to protect the furniture pieces and your floor.
- Identify Parts: Unpack all components and identify them using the provided labels and the parts list in your separate assembly diagram.
- Assemble the Frame: Begin by connecting the main side panels and back panel according to the diagram. Use the specified screws and dowels. Ensure all connections are snug but do not overtighten.
- Install Drawer Slides: Attach the drawer slides to the inner sides of the chest frame. Pay attention to the orientation (left/right, front/back) as indicated in the diagram.
- Assemble Drawers: Construct each of the six drawers. Attach the drawer sides, back, and bottom panel. Install the corresponding drawer slides onto the drawer boxes.
- Insert Drawers: Carefully slide each assembled drawer into its designated slot in the chest frame. Ensure they glide smoothly.
- Attach Anti-Tipping Kits: This is a critical safety step. Securely attach the anti-tipping kits to the back of the chest and to a solid wall stud using the provided hardware. Follow the specific instructions included with the anti-tipping kit.
Operating Instructions
The VASAGLE KAILYN Chest of Drawers is designed for convenient storage. To ensure longevity and proper function:
- Opening and Closing Drawers: Use the discreet integrated handles on the top edge of each drawer to pull them open or push them closed. Avoid forcing drawers.
- Loading Drawers: Distribute items evenly within each drawer. Avoid overloading to prevent damage to the drawer slides and bottom panels.
- Weight Distribution: Place heavier items in lower drawers to maintain stability.



Maintenance
To keep your chest of drawers in excellent condition:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they can damage the finish.
- Spills: Clean up spills immediately to prevent staining or damage to the material.
- Hardware Check: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary, but do not overtighten.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration.
- Humidity Control: Maintain a stable room temperature and humidity level to prevent warping or cracking of the wood-based panels.
Troubleshooting
If you encounter any issues, refer to the following common problems and solutions:
- Drawers not closing smoothly:
- Check if the drawer slides are correctly aligned and installed.
- Ensure the drawer is not overloaded or unbalanced.
- Verify that all screws on the drawer slides are tight.
- Chest feels wobbly:
- Ensure all assembly screws are fully tightened.
- Confirm the anti-tipping kit is securely installed to the wall.
- Place the chest on a level surface.
- Missing parts:
- Carefully re-check all packaging materials.
- Contact VASAGLE customer support with your model number and the specific part number needed.
Specifications
| Brand | VASAGLE |
| Model | LTS616W01 |
| Color | White Snow |
| Material | Particleboard, MDF Panel |
| Overall Dimensions (L x W x H) | 119.4 x 40 x 75 cm (47 x 15.7 x 29.5 inches) |
| Item Weight | 37.4 Kilograms (82.4 lbs) |
| Number of Drawers | 6 |
| Max. Load Capacity (Top Surface) | 75 kg (165 lbs) |
| Max. Load Capacity (Per Drawer) | 10 kg (22 lbs) |

Warranty and Support
VASAGLE products are designed for quality and durability. For any questions, missing parts, or issues not covered in this manual, please contact VASAGLE customer support. Please have your model number (LTS616W01) and purchase information ready when contacting support.
For more information or to explore other products in the KAILYN collection, visit the official VASAGLE store.





