JZEKVN 202541001

JZEKVN Modern LED Bathroom Vanity Light Fixture

Model: 202541001 (16.14 inch, 3-Light, Black)

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your JZEKVN Modern LED Bathroom Vanity Light Fixture. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and use will ensure optimal performance and safety.

Safety Information: Always turn off the power at the circuit breaker before beginning any electrical work. Consult a qualified electrician if you are unsure about any part of the installation process. This fixture is designed for indoor use only.

Package Contents

Please verify that all components are present before installation:

  • 1 x LED Bathroom Vanity Light Fixture
  • 1 x Mounting Plate (US standard)
  • 1 x Hardware Pack (screws, wire nuts)
  • 1 x Instruction Manual

Note: This fixture is hardwired and does not include a switch or plug.

Setup and Installation

Follow these steps for safe and correct installation:

  1. Turn Off Power: Before starting, ensure the power supply to the installation area is turned off at the main circuit breaker.
  2. Prepare Mounting Surface: Ensure the wall surface is clean, dry, and capable of supporting the fixture's weight.
  3. Attach Mounting Plate: Secure the US standard mounting plate to the junction box on your wall using the provided screws. Ensure it is firmly attached.
  4. Make Electrical Connections: Connect the fixture's wires to your household wiring. Match the live (black) wire from the fixture to the live (black) wire from the junction box, the neutral (white) wire from the fixture to the neutral (white) wire from the junction box, and the ground (green/bare copper) wire from the fixture to the ground wire from the junction box. Secure connections with wire nuts.
  5. Mount the Fixture: Carefully align the fixture with the mounting plate and secure it using the provided screws. Ensure the fixture is flush against the wall and stable.
  6. Restore Power: Once installation is complete and all connections are secure, turn the power back on at the circuit breaker.
Diagram showing the installation steps for the JZEKVN vanity light.
Figure 1: Illustration of the vanity light installation process, showing wiring and mounting to the wall.

Operating Instructions

This LED vanity light is designed for straightforward operation:

  • Power On/Off: Control the light using your standard wall switch. The fixture is not dimmable.
  • Rotatable Lamp Bodies: Each of the three lamp bodies can be rotated up to 350 degrees independently. Gently adjust the square light heads to direct illumination as desired.
Image showing the JZEKVN vanity light installed above a mirror, with an inset diagram illustrating the 350-degree rotation feature.
Figure 2: The rotatable design allows for adjustable light direction. The inset shows the 350-degree rotation capability of each light head.
Comparison image showing the JZEKVN vanity light turned off and turned on, highlighting its 6000K cool white brightness.
Figure 3: Visual representation of the light fixture in both off and on states, demonstrating the 6000K cool white illumination.

Maintenance

To maintain the appearance and performance of your light fixture:

  • Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or acrylic components.
  • LED Care: The integrated LED bulbs are designed for long-term use and do not require replacement.

Troubleshooting

If you encounter issues with your light fixture, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn on.No power supply; loose wiring; faulty switch.Check circuit breaker. Verify all wire connections are secure. Test the wall switch.
Light flickers.Loose wiring; incompatible dimmer switch.Ensure all connections are tight. This fixture is not dimmable; ensure a standard ON/OFF switch is used.
Delay in turning on (2-3 seconds).Normal operation for some LED drivers.This is often a characteristic of the LED driver and not a fault.

Specifications

Key technical details for your JZEKVN LED Bathroom Vanity Light Fixture:

  • Model: 202541001
  • Brand: JZEKVN
  • Dimensions: 16.14"L x 4.33"W x 5.12"H
  • Material: Acrylic, Metal
  • Color: Black
  • Light Source: Integrated LED
  • Number of Light Sources: 3
  • Wattage: 24 Watts
  • Brightness: 1600 Lumens
  • Color Temperature: 6000 Kelvin (Cool White)
  • Voltage: 120 Volts (AC)
  • Installation Type: Wall Mount, Hardwired
  • Special Features: Rotatable (350 degrees per lamp body), Not Dimmable
  • Indoor/Outdoor Usage: Indoor use only
  • Water Resistance Level: Water Resistant
Diagram illustrating the dimensions and various sizes available for the JZEKVN vanity light fixtures.
Figure 4: Product dimensions and size guide for different vanity light configurations.

Warranty and Support

This JZEKVN product comes with a Limited Warranty. For specific warranty details or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.