1. Introduction
Thank you for choosing the ZIQOPGD HX801 Bluetooth Neckband Headphones. This manual provides detailed instructions for the proper use, setup, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and longevity of your headphones.
Figure 1: ZIQOPGD HX801 Bluetooth Neckband Headphones, black color.
2. Product Overview
2.1 Package Contents
- ZIQOPGD HX801 Bluetooth Neckband Headphones
- USB Charging Cable
- Eartips (various sizes)
- User Manual
2.2 Component Identification
Familiarize yourself with the various parts and controls of your headphones:
Figure 2: Labeled diagram showing the Memory Flex Neck Band, Power Button, LED Indicator, Charging Port, Volume Up/Down, MFB (Call/Reject), Stretch Switch, and MFB (Play/Pause Button).
- Memory Flex Neck Band: Conforms to your neck for comfort.
- Power Button: Used for powering on/off and pairing.
- LED Indicator: Displays device status (e.g., pairing, charging).
- Charging Port: For connecting the USB charging cable.
- Volume Up/Down: Adjusts audio volume.
- MFB (Multi-Function Button) - Call/Reject: Manages phone calls.
- Stretch Switch: Activates the retractable earbud mechanism.
- MFB (Multi-Function Button) - Play/Pause: Controls music playback.
3. Setup
3.1 Initial Charging
- Connect the provided USB charging cable to the charging port on the headphones.
- Connect the other end of the cable to a USB power source (e.g., computer, wall adapter).
- The LED indicator will illuminate during charging. A full charge typically takes approximately 2 hours.
- The LED indicator will change color or turn off once charging is complete.
Note: For optimal battery life, fully charge the headphones before first use.
Figure 3: Battery performance details, indicating 18-24 hours continuous playback, 200mAh battery, and 2 hours to full charge via Type-C.
3.2 Powering On/Off
- To Power On: Press and hold the Power Button for approximately 3 seconds until the LED indicator flashes.
- To Power Off: Press and hold the Power Button for approximately 3 seconds until the LED indicator turns off.
4. Operating Instructions
4.1 Bluetooth Pairing
- Ensure the headphones are fully charged and powered off.
- Press and hold the Power Button for approximately 5-7 seconds until the LED indicator flashes red and blue alternately. This indicates pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "HX801" from the list of found devices.
- Once connected, the LED indicator will flash blue slowly, and you may hear an audible confirmation.
- If prompted for a password, enter "0000".
Note: The headphones will automatically attempt to reconnect to the last paired device when powered on.
4.2 Controlling Playback and Calls
| Function | Action |
|---|---|
| Play/Pause Music | Press the MFB (Play/Pause Button) once. |
| Next Track | Long press the 'Volume Up' button. |
| Previous Track | Long press the 'Volume Down' button. |
| Volume Up | Short press the 'Volume Up' button. |
| Volume Down | Short press the 'Volume Down' button. |
| Answer/End Call | Press the MFB (Call/Reject) once. |
| Reject Call | Press and hold the MFB (Call/Reject) for 2 seconds. |
| Redial Last Number | Double-press the MFB (Call/Reject). |
4.3 Retractable Earbuds
The HX801 features auto-retractable earbuds for convenience and tangle-free storage.
- To Extend: Gently pull the earbud wire to the desired length.
- To Retract: Press the Stretch Switch button, and the earbud wire will automatically retract into the neckband.
Figure 4: Illustration of the retractable earbud function and silicon neckband design.
4.4 Vibration Reminder
The neckband will vibrate to alert you of incoming calls, ensuring you do not miss important communications even when the headphones are not in your ears.
5. Maintenance
5.1 Cleaning
- Wipe the headphones with a soft, dry, lint-free cloth.
- Do not use abrasive cleaners, alcohol, or chemical solvents.
- Clean the eartips regularly with a damp cloth and mild soap, then dry thoroughly before reattaching.
5.2 Storage
- Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
- Ensure earbuds are fully retracted before storage to prevent wire damage.
6. Troubleshooting
| Problem | Possible Solution |
|---|---|
| Cannot power on | Ensure the headphones are charged. Connect to a power source and try again. |
| Cannot pair with device | Ensure headphones are in pairing mode (LED flashing red/blue). Turn off and on Bluetooth on your device. Move closer to the device. |
| No sound or low volume | Check volume levels on both headphones and your connected device. Ensure headphones are properly paired. |
| Intermittent connection | Ensure no obstacles are between the headphones and your device. Move closer to your device. Avoid strong electromagnetic interference. |
| Earbuds not retracting | Ensure the wire is not tangled or obstructed. Press the Stretch Switch firmly. Avoid pulling the wires excessively. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | HX801 NECKBAND HEADPHONES |
| Connectivity Technology | Wireless (Bluetooth) |
| Bluetooth Version | 5.1 |
| Bluetooth Range | 10 Meters |
| Noise Control | Passive Noise Cancellation |
| Battery Life (Music Playback) | Up to 22 Hours |
| Battery Life (Talk Time) | Up to 20 Hours |
| Standby Time | Up to 550 Hours |
| Charging Time | Approximately 2 Hours |
| Material | Plastic |
| Item Weight | 0.06 Kilograms (2.08 ounces) |
| Product Dimensions | 7 x 6 x 0.6 inches |
| Water Resistance | IPX5 Sweatproof |
| Compatible Devices | Cellphones, Desktops, Laptops, Tablets, Telephones |
8. Warranty and Support
ZIQOPGD products are designed and manufactured to the highest quality standards. For warranty information, technical support, or customer service inquiries, please refer to the contact information provided with your purchase or visit the official ZIQOPGD website. Please retain your proof of purchase for warranty claims.