FOLOKE LED Light Therapy Mask User Manual

Introduction

This manual provides essential information for the safe and effective use of your FOLOKE LED Light Therapy Mask. Please read these instructions thoroughly before operating the device and retain them for future reference. This device is designed for home use to support skin care routines using specific LED light wavelengths.

Safety Information

• Do not use if you are pregnant, breastfeeding, or have epilepsy.
• Consult a physician before use if you have any pre-existing skin conditions, light sensitivity, or are taking medications that cause photosensitivity.
• Avoid direct eye exposure to the LED lights. Use the provided eye protection during treatment.
• Keep the device dry. Do not use near water or in wet environments.
• Keep out of reach of children.
• Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
• Ensure the device is fully charged before first use.

Package Contents

Verify that all items are present in your package:

• FOLOKE LED Light Therapy Mask
• Controller
• USB Charging Cable (Type-C)
• Adjustable Headband
• Soft Eye Pads
• User Manual

Product Overview

The FOLOKE LED Light Therapy Mask is a flexible, silicone-based mask equipped with 72 LED lamp beads designed for focused and efficient light delivery. It features a portable controller for easy operation and adjustable straps for a comfortable fit.

Image: Exploded view of the FOLOKE LED Light Therapy Mask components, illustrating the portable power supply, soft eye pads, headband, soft silicone film, LED three-spot lights, diffusion film, clear silicone, and adjustable strap.

Image: Close-up view of the FOLOKE LED Light Therapy Mask highlighting its 72 lamp beads, designed for uniform lighting, low energy consumption, and a soft, comfortable silicone material.

Setup and Charging

1. Assemble the Mask: Attach the adjustable straps and soft eye pads to the mask for a comfortable and secure fit.
2. Connect the Controller: Plug the mask's cable into the designated USB port on the controller.
3. Initial Charge: Before first use, fully charge the controller. Connect the controller's Type-C port to a power adapter using the provided Type-C cable. Charging is expected to take up to 4 hours. The mask cannot be synchronized while charging.

Image: Step-by-step diagram illustrating the connection of the light therapy mask to its controller and the process of charging the controller via its Type-C port.

Operating Instructions

1. Prepare Your Skin: Clean and dry your face and hands thoroughly. Ensure no makeup or dirt is present.
2. Skin Sensitivity Test (First Use): Before full treatment, perform a skin sensitivity test. Apply the mask for a shorter duration (e.g., 5 minutes) to a small area of skin to check for any adverse reactions.
3. Position the Mask: Place the mask on your face, adjusting the straps for a comfortable fit. Ensure the eye pads cover your eyes completely.
4. Select Light Mode: Use the controller to select your desired light therapy mode (Red, Blue, or Red & Blue).
5. Set Treatment Time: Adjust the treatment duration using the controller. Recommended illumination times are 10, 20, or 30 minutes.
6. Begin Treatment: Start the light therapy session. Relax during the treatment.
7. Post-Treatment: After the session, remove the mask and apply your preferred moisturizer to your skin.

Recommended Usage: Perform this treatment 3 to 5 times per week for 10-30 minutes each time, for a duration of 4 to 6 weeks. Adjust as needed for maintenance.

Image: Visual guide detailing the five steps for using the mask, including skin cleaning, connecting the mask, adjusting it, starting illumination, and applying moisturizer.

Light Therapy Modes

The FOLOKE LED Light Therapy Mask offers three distinct light modes, each targeting specific skin concerns:

• Red Light Therapy (630nm & 830nm):

  This mode utilizes red light at 630nm and near-infrared light at 830nm. It is commonly associated with promoting collagen regeneration, reducing the appearance of wrinkles, and improving skin elasticity and firmness. This mode is often used for anti-aging benefits.

  

  Image: The mask illuminated with red light, demonstrating the Red Light Therapy mode.

• Blue Light Therapy (470nm):

  The blue light at 470nm is typically used for its antiseptic properties and to help balance oil secretion. It can assist in reducing inflammation and repairing damaged skin barriers, making it suitable for acne treatment and improving overall skin clarity.

  

  Image: The mask illuminated with blue light, demonstrating the Blue Light Therapy mode.
• Red & Blue Light Therapy (Automatic Conversion):

  This combined mode automatically switches between red and blue light. It offers a comprehensive treatment, addressing both anti-aging concerns (collagen activation, wrinkle reduction) and skin clarity issues (antiseptic effects, anti-inflammation, scar repair).

  

  Image: The mask illuminated with a blend of red and blue light, demonstrating the Red & Blue Light Therapy mode.

Image: Diagram showing the targeted effects of blue light (antiseptic, oil balance), red light (anti-aging, wrinkle removal, collagen activation, elasticity), and combined red & blue light (anti-inflammation, scar repair, postmark removal) on various skin layers.

Maintenance

• Cleaning: After each use, gently wipe the mask with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the mask is completely dry before storage.
• Disinfection: Regularly disinfect the mask to maintain hygiene. Use a mild, skin-safe disinfectant spray and wipe clean.
• Storage: Store the mask in a cool, dry place away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.
• Battery Care: To prolong battery life, avoid fully discharging the controller frequently. Charge it when the battery indicator is low.

Troubleshooting

Specifications

• Model: B0F87Q57Q1
• Brand: FOLOKE
• Light Wavelengths: Red Light (630nm & 830nm), Blue Light (470nm)
• Number of LED Beads: 72
• Power Source: 1 Lithium Polymer battery (included)
• Product Dimensions: 14.01 x 9.83 x 1.97 inches
• Product Weight: 2.16 Pounds
• Charging Interface: Type-C

Image: A diagram illustrating the key dimensions of the phototherapy mask, including width and height, with a note to adjust for individual facial features and to clean regularly.

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact FOLOKE customer service directly. Keep your purchase receipt as proof of purchase.