1. Introduction
Thank you for choosing the Flwrgirl Folding Wood Bedside Bassinet. This manual provides essential information for the safe assembly, operation, and maintenance of your bassinet. Please read all instructions carefully before use and retain this manual for future reference.
This 4-in-1 bassinet is designed for infants and newborns, offering versatility as a standalone baby crib, a bedside sleeper, a portable folding unit, and features adjustable mattress heights.
2. Important Safety Warnings
FAILURE TO FOLLOW THESE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.
- SUFFOCATION HAZARD: Infants can suffocate in gaps between an extra mattress and the side of the bassinet/crib, or on soft bedding. Use ONLY the mattress provided by the manufacturer. NEVER add a pillow, comforter, or another mattress for padding.
- FALL HAZARD: To prevent falls, do not use this product when the infant begins to push up on hands and knees, or has reached 50 pounds, whichever comes first.
- Always ensure the bassinet is placed on a firm, flat surface.
- Keep small parts away from children during assembly.
- Regularly check all fasteners for tightness. Do not use the bassinet if any parts are missing, damaged, or broken.
- Do not modify the bassinet or use non-original parts.
- Keep the bassinet away from open flames, heaters, and other heat sources.
- When used as a bedside sleeper, ensure the bassinet is securely attached to the adult bed and there are no gaps between the bassinet and the adult mattress.
3. Parts List
Please verify that all components are present before beginning assembly.
- Bassinet Frame (Pine Wood)
- Sleeping Board
- Mattress (38"x24")
- 4 x Wheels (2 with locking mechanism)
- Assembly Hardware (screws, bolts, Allen wrench)
- Instruction Manual
4. Assembly Instructions
Assembly is required and is designed to be simple. Follow these steps carefully.
Step 1: Attach Wheels
Insert the four wheels into the designated holes at the bottom of the bassinet legs. Ensure the two locking wheels are placed on the same side for easy access.
Step 2: Assemble the Frame
Connect the side panels and end panels using the provided hardware. Ensure all screws are tightened securely. Do not overtighten.
Step 3: Install Sleeping Board
Place the sleeping board into the bassinet frame. Ensure it rests securely on the support ledges at the desired height. The bassinet offers three adjustable height levels.
Step 4: Place Mattress
Lay the provided mattress (38"x24") onto the sleeping board. Ensure it fits snugly without gaps around the edges.
5. Operating Instructions
The Flwrgirl Bassinet offers a 4-in-1 design for versatile use.
5.1. 4-in-1 Modes
- Baby Crib Mode: Use as a standalone crib. Ensure all sides are up and locked.
- Bedside Bassinet Mode: Lower one side panel and attach the bassinet securely to the adult bed using the provided straps (if applicable). Ensure there are no gaps.
- Folding Mode: For storage or travel, the bassinet can be folded into a compact size. Refer to the folding mechanism instructions (usually involves releasing side latches).
- Adjustable Mattress Heights: The mattress height can be adjusted to three levels (21", 17", 12" from the ground) to suit your needs and the height of your adult bed.
5.2. Adjusting Mattress Height
To adjust the mattress height:
- Remove the mattress and sleeping board.
- Relocate the sleeping board support ledges to the desired height (21 inches, 17 inches, or 12 inches from the ground).
- Reinsert the sleeping board and mattress, ensuring they are secure.
5.3. Mobility and Locking Wheels
The bassinet is equipped with four 360° swivel casters for easy movement. To secure the bassinet in place, press down on the locking mechanism on the two designated wheels until they click into position. To unlock, lift the mechanism.
6. Maintenance and Care
- Cleaning the Frame: Wipe the pine wood frame with a damp cloth and mild soap. Dry thoroughly. Avoid abrasive cleaners.
- Mattress Care: The mattress cover is washable. Follow the care instructions on the mattress label. For the mattress itself, the overall product care instruction is "Dry Clean Only"; please consult the mattress label for specific instructions.
- Inspections: Periodically inspect all screws, bolts, and fasteners to ensure they are tight and secure.
- Store the bassinet in a dry place when not in use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bassinet feels unstable or wobbly. | Loose fasteners or uneven surface. | Ensure all screws and bolts are tightened. Place the bassinet on a flat, level surface. |
| Wheels do not roll smoothly or lock. | Debris in wheels or locking mechanism engaged/stuck. | Clean any debris from the wheels. Ensure the locking mechanism is fully disengaged for movement or fully engaged for stability. |
| Mattress does not fit snugly. | Incorrect mattress or improper placement. | Use only the provided 38"x24" mattress. Ensure it is correctly positioned on the sleeping board. |
| Difficulty folding the bassinet. | Folding latches not released or obstruction. | Refer to the assembly instructions for the specific folding mechanism. Ensure all safety latches are disengaged before attempting to fold. |
8. Product Specifications
- Model Number: FL202502
- Brand: Flwrgirl
- Material: Pine Wood
- Color: White
- Product Dimensions (L x W x H): 39" x 27" x 34"
- Mattress Dimensions: 38" x 24"
- Item Weight: 30 Pounds
- Maximum Weight Recommendation: 50 Pounds
- Adjustable Mattress Heights (from ground): 21", 17", 12"
- Special Features: Adjustable Height, Convertible, Foldable, Locking Wheels, Wheeled
- Assembly: Required (Simple)
- Product Care Instructions: Dry Clean Only (for fabric components); Wipe wood frame with damp cloth.
- UPC: 794677032111
9. Warranty and Support
For warranty information or product support, please contact Flwrgirl customer service. Details can typically be found on the product packaging or the manufacturer's official website.
Please have your model number (FL202502) and purchase date available when contacting support.