SNUGWAY Ergonomic Gaming Chair Model 91305 Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your SNUGWAY Ergonomic Gaming Chair Model 91305. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your chair. Keep this manual for future reference.

Image 1.1: The SNUGWAY Ergonomic Gaming Chair Model 91305 in Midnight Blue.

2. Safety Information

• Ensure the chair is fully assembled according to the instructions before any use.
• Do not exceed the maximum weight capacity of 250 lbs (113 kg). Exceeding this limit may cause damage to the chair or personal injury.
• Use the chair on appropriate, level surfaces to prevent slipping or tipping.
• Keep hands and fingers clear of moving parts during adjustment.
• Do not stand on the chair.
• Periodically check all bolts and screws to ensure they are tight. Retighten as necessary.

3. Assembly Instructions

The SNUGWAY Ergonomic Gaming Chair is designed for straightforward assembly, typically completed within 15 minutes. All necessary hardware and tools are included in the package.

3.1. Package Contents

Before beginning assembly, verify that all components are present. Refer to the included parts list in your package. Typical components include:

• Chair Backrest
• Seat Cushion
• Armrests (2)
• Gas Lift Cylinder
• Star Base
• Casters (5)
• Mechanism Plate
• Hardware (screws, washers, Allen wrench)

3.2. Assembly Steps

1. Attach Casters to Base: Insert each of the five casters into the holes at the end of the star base until they click securely into place.
2. Insert Gas Lift: Place the gas lift cylinder into the center hole of the assembled star base.
3. Attach Mechanism Plate: Secure the mechanism plate to the underside of the seat cushion using the provided screws. Ensure the front of the mechanism faces the front of the seat.
4. Attach Armrests: Fasten the armrests to the sides of the seat cushion using the designated screws.
5. Connect Backrest to Seat: Align the backrest with the seat cushion and secure it using the remaining screws.
6. Place Assembled Top onto Base: Carefully place the assembled seat and backrest onto the gas lift cylinder, ensuring it is centered and stable.

Image 3.1: Key adjustable features and base components of the chair.

4. Operating Instructions

Your SNUGWAY Ergonomic Gaming Chair offers several adjustable features to enhance comfort and adaptability.

4.1. Height Adjustment

To adjust the seat height (ranging from approximately 16.3 to 20.1 inches):

• To raise: While seated, lift the height adjustment lever located under the right side of the seat. The chair will rise. Release the lever at the desired height.
• To lower: While seated, lift the height adjustment lever. Apply slight pressure to the seat, and the chair will lower. Release the lever at the desired height.

4.2. Tilt/Rocking Function

The chair features a rocking mode with a tilt range from 90° (upright) to 120° (reclined):

• To enable rocking: Pull the height adjustment lever outwards. The chair back will now allow for a gentle rocking motion.
• To lock upright: Push the height adjustment lever inwards. The chair will lock in the upright 90° position.

4.3. Swivel and Mobility

• The chair's 360° swivel base allows for full rotation, providing flexibility and ease of movement.
• The multi-direction casters enable smooth and silent movement across various floor types, protecting surfaces from scratches.

Image 4.1: Ergonomic design and rocking function for back and lumbar support.

5. Maintenance and Care

Proper care will help maintain the appearance and functionality of your SNUGWAY Gaming Chair.

• Cleaning: The PU leather surface can be easily cleaned by wiping with a damp cloth. For tougher stains, use a mild soap solution and then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
• Spills: Promptly clean any spills to prevent staining or damage to the PU leather. The material is designed to be waterproof and scratch-resistant.
• Inspection: Periodically inspect all screws, bolts, and connections to ensure they are secure. Tighten any loose fasteners to maintain stability and safety.
• Casters: Keep casters free of debris (hair, dust) to ensure smooth rolling.

Image 5.1: Details of the relaxing seat cushion construction.

6. Troubleshooting

If you encounter any issues with your SNUGWAY Gaming Chair, refer to the following common solutions:

• Chair feels unstable or wobbly: Check all assembly screws and bolts. Ensure they are fully tightened. Verify that the gas lift is properly seated in the base and mechanism plate.
• Chair does not adjust height: Ensure the height adjustment lever is fully engaged or disengaged as required. Check if the gas lift cylinder is correctly installed and not damaged.
• Casters not rolling smoothly: Inspect casters for any trapped debris (hair, dust, small objects) and remove them. Ensure casters are fully inserted into the star base.
• Chair makes noise: Tighten all screws and bolts. Apply a small amount of silicone lubricant to moving parts if squeaking persists.

If problems persist after attempting these solutions, please contact SNUGWAY customer service for further assistance.

7. Specifications

Image 7.1: Detailed dimensions and weight capacity of the chair.

8. Warranty and Support

SNUGWAY is committed to providing professional customer service and support. If you have any questions, concerns, or require assistance with your product, please do not hesitate to contact us.

For warranty information and claims, please refer to the documentation included with your purchase or contact SNUGWAY customer service directly. Details regarding specific warranty periods and coverage will be provided upon inquiry.