Introduction
Thank you for choosing the Furinno Cubicle 8-Cube Reversible Bookshelf. This versatile storage unit is designed to enhance your living space, offering practical organization for various items. Its reversible design allows for flexible placement in any room. Please read this manual carefully before assembly and use to ensure safe and correct operation.
Safety Warnings
Failure to follow these safety warnings may result in product damage, instability, collapse, and/or serious injury.
- This unit is designed to support the maximum loads indicated. Exceeding these load limits may cause sagging, instability, product collapse, and/or serious injury.
- Do not allow children to climb on the unit.
- Place heavier items on the lower shelves to maintain stability.
- Always use the provided anti-toppling kits to secure the unit to a wall, especially in households with children or pets.

Figure 1: Anti-Toppling Kit Installation. This image illustrates how to attach the anti-toppling kit to the wall and the bookshelf to prevent accidental tipping. Hardware for this kit is included.
Package Contents
Before beginning assembly, ensure all parts and hardware are present. Refer to the assembly instructions included in your package for a detailed list of components. The package typically includes:
- Engineered wood panels (various sizes)
- Assembly hardware (screws, dowels, cam locks, etc.)
- Anti-toppling kit
- Assembly instruction manual
Note: If any parts are missing or damaged, please contact customer support before proceeding with assembly.
Setup and Assembly
Assembly of the Furinno Cubicle Bookshelf is designed to be straightforward. It is recommended that one person performs the assembly, which typically takes approximately 25-30 minutes.
- Preparation: Clear a spacious area for assembly. Lay out all components on a soft, clean surface to prevent scratches.
- Tools Required: A screwdriver (not included) is generally the only tool needed.
- Follow Instructions: Refer to the step-by-step assembly instructions provided in your package. Ensure each piece is oriented correctly before securing.
- Reversible Design: This bookshelf can be assembled for horizontal or vertical orientation. Plan your desired orientation before starting.
- Secure to Wall: After assembly, always attach the unit to a wall using the provided anti-toppling kit (see Safety Warnings section).

Figure 2: Assembly and Reversibility. This image highlights the easy assembly process, estimated at 30 minutes, and the 360-degree reversible design of the bookshelf, allowing for flexible orientation.

Figure 3: Assembly Overview. This graphic provides key assembly information, including an estimated assembly time of 25 minutes, recommendation for one person, and tools required. It also shows the overall dimensions and individual shelf weight capacities.
Operating and Usage
The Furinno Cubicle Bookshelf is designed for versatile storage in various indoor environments.
- Placement: Suitable for living rooms, bedrooms, home offices, study rooms, and dormitories.
- Storage: Use the eight open compartments to store books, decorative items, office supplies, toys, or collection pieces. Compatible with standard storage bins or baskets.
- Weight Distribution: Always distribute weight evenly across shelves. Place heavier items on lower shelves to enhance stability. Each shelf can support up to 13.6 kg (30 lbs). The top panel also supports up to 13.6 kg (30 lbs). The maximum total load capacity is 122.5 kg (270 lbs).
- Reversible Orientation: The unit can be used horizontally or vertically depending on your space and storage needs.

Figure 4: Bookshelf in Use. This image displays the 8-cube bookshelf integrated into a home office, showcasing its capacity to hold books, office supplies, and decorative baskets.

Figure 5: Organized Storage. This image shows the bookshelf filled with binders, decorative boxes, and other items, demonstrating its organizational potential.
Maintenance
Proper care will ensure the longevity and appearance of your Furinno bookshelf.
- Cleaning: Wipe the unit with a clean, damp cloth.
- Chemicals: Avoid using harsh chemicals, abrasive cleaners, or polishes, as these can damage the laminated finish.
- Spills: Promptly wipe up any spills to prevent water damage or staining.
- Inspection: Periodically check all hardware connections to ensure they remain tight. Retighten if necessary.
Troubleshooting
If you encounter issues with your bookshelf, refer to these common solutions:
- Wobbling/Instability:
- Ensure all screws and fasteners are securely tightened.
- Verify the unit is placed on a level surface.
- Confirm the anti-toppling kit is properly installed and secured to the wall.
- Check that weight is distributed evenly, with heavier items on lower shelves.
- Difficulty during Assembly:
- Review the assembly instructions carefully, paying attention to part orientation.
- Do not overtighten screws, as this can strip the wood composite.
- If a part seems ill-fitting, double-check the part number against the manual.
- Damaged Finish from Stickers:
- While not a functional issue, if part labels caused damage, contact customer support for advice on cosmetic repair or replacement if within warranty.
Specifications
| Model Number | LU22006AP |
| Brand | Furinno |
| Material | Engineered Wood |
| Finish Type | Laminated |
| Color | Amber Pine |
| Number of Cubes/Shelves | 8 |
| Product Dimensions (D x W x H) | 37 cm x 76.2 cm x 147.1 cm (14.6" D x 30" W x 57.9" H) |
| Outer Frame Thickness | Approx. 30 mm (1.2 inches) |
| Internal Shelf Thickness | 1.27 cm (0.5 inches) |
| Weight Capacity per Shelf | 13.6 kg (30 lbs) |
| Total Weight Capacity | 122.5 kg (270 lbs) |
| Item Weight | 45.1 lbs |
| Assembly Required | Yes |
| Country of Origin | Malaysia |
| UPC | 840308819467 |

Figure 6: Panel Thickness. This image provides a close-up view of the panel thickness, measured at 1.2 inches (approximately 30mm), indicating a robust construction for the outer frame.

Figure 7: Extra Thick Panel. This image further emphasizes the "2x Extra Thick" construction, showing a panel thickness of 30mm for the main structural components.
Warranty
Specific warranty details are typically provided with your purchase documentation. Please refer to the information included in your product packaging or contact Furinno customer support for warranty inquiries. Generally, products are covered against manufacturing defects for a limited period from the date of purchase.
Support
For further assistance, missing parts, or any questions regarding your Furinno Cubicle Bookshelf, please contact Furinno customer support. You can usually find contact information on the Furinno website or within your product packaging.
Visit the official Furinno store for more information: Furinno Store