xcarpad OEM Style Auxiliary Switch Bank Kit Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your xcarpad OEM Style Auxiliary Switch Bank Kit. This kit is designed to seamlessly integrate into your vehicle, offering control over additional accessories. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Product Overview

The xcarpad Auxiliary Switch Bank Kit provides an OEM-style solution for adding up to six auxiliary switches to your Ford F150 (2015-2021). It features a plug-and-play design, eliminating the need for cutting wires or complex software updates. The integrated relay is IP66 waterproof, ensuring durability in various environmental conditions.

Image 2.1: Front view of the xcarpad OEM Style Auxiliary Switch Bank Kit.

3. Package Contents

Verify that all components listed below are present in your package:

• 1 x Auxiliary Switch Panel
• 1 x Fuse Box
• Wiring Harness
• Mounting Screws

Image 3.1: Components included in the xcarpad Auxiliary Switch Bank Kit package.

4. Compatibility

This auxiliary switch bank kit is specifically designed for the following vehicle models:

• Ford F150: 2015, 2016, 2017, 2018, 2019, 2020, 2021
• Ford Super Duty F250, F350, F450, F550: 2015-2021

It is crucial to confirm your vehicle's model and year before installation to ensure proper fitment. This kit is not compatible with F150 & Bronco 2021-2024 models.

Image 4.1: Visual guide indicating compatibility for Ford F150 2015-2021 and non-compatibility for F150 & Bronco 2021-2024.

5. Setup (Installation)

The xcarpad Auxiliary Switch Bank Kit is designed for a hassle-free, plug-and-play installation. No cutting of factory wires or drilling of holes is required. No dealership flashing or software updates are necessary.

Installation Steps:

1. Prepare the Vehicle: Ensure the vehicle is turned off and the battery is disconnected for safety.
2. Locate Installation Area: Identify the factory location in your vehicle's dash or overhead console where the switch bank will be installed.
3. Remove Existing Panel (if applicable): Carefully remove any existing panel or cover from the installation area.
4. Connect Wiring Harness: Connect the provided wiring harness to the vehicle's existing electrical system. The plug-and-play design ensures direct connections without splicing.
5. Mount the Switch Panel: Securely install the auxiliary switch panel into the designated factory location using the provided screws. Ensure it fits without gaps.
6. Connect Accessories: Connect your desired 12V accessories (e.g., lights, air compressor) to the appropriate terminals on the fuse box, which is then connected to the switch bank.
7. Reconnect Battery: Once all connections are secure and the panel is mounted, reconnect the vehicle's battery.
8. Test Functionality: Turn on the vehicle and test each auxiliary switch to ensure proper operation of connected devices.

For visual guidance, please refer to any available installation videos provided by the manufacturer or reputable automotive resources.

Image 5.1: Comparison of the overhead console before and after the installation of the auxiliary switch bank.

Image 5.2: Close-up view of the auxiliary switch bank installed in the overhead console.

6. Operating Instructions

The auxiliary switch bank allows you to control up to six independent 12V accessories. Each switch is clearly labeled 'AUX 1' through 'AUX 6'.

• Activating an Accessory: Press the desired auxiliary switch (e.g., AUX 1) to turn on the connected device. The switch will typically illuminate or provide tactile feedback to indicate activation.
• Deactivating an Accessory: Press the same auxiliary switch again to turn off the connected device.

Ensure that the total current draw of all connected devices does not exceed the maximum current rating of the system (60A) to prevent overloading.

Image 6.1: Illustration of the auxiliary switch bank controlling up to six external devices, such as off-road lights.

7. Maintenance

The xcarpad Auxiliary Switch Bank Kit is designed for durability and requires minimal maintenance. The IP66 waterproof rating of the relay ensures protection against dust and water ingress.

• Cleaning: Use a soft, damp cloth to clean the surface of the switch panel. Avoid abrasive cleaners or solvents that could damage the finish.
• Inspection: Periodically check the wiring connections for any signs of wear, corrosion, or looseness. Ensure all accessories are securely connected.
• Fuse Replacement: If an accessory stops working, check the corresponding fuse in the fuse box. Replace blown fuses with new ones of the correct amperage rating.

8. Troubleshooting

If you encounter issues with your auxiliary switch bank, consider the following troubleshooting steps:

• Switch Not Activating Device:
  • Check if the vehicle's ignition is on.
  • Verify that the accessory is properly connected to the fuse box and the switch.
  • Inspect the fuse for the specific switch/accessory. Replace if blown.
  • Ensure the accessory itself is functional by testing it independently.
• No Power to Any Switch:
  • Check the main power connection to the auxiliary switch bank.
  • Verify the vehicle's battery is properly connected and charged.
• Loose Fitment:
  • Ensure all mounting screws are tightened.
  • Confirm that the kit is compatible with your specific vehicle model and year.

If problems persist after attempting these steps, please contact customer support for further assistance.

9. Specifications

10. Warranty and Support

Your xcarpad Auxiliary Switch Bank Kit comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

Contacting Customer Support:

If you have any questions, require technical assistance, or need to claim warranty service, please follow these steps:

1. Visit the xcarpad store page on Amazon.
2. Locate the 'Ask a question' link or button.
3. Submit your inquiry, providing details about your product and the issue you are experiencing.

Our customer support team is dedicated to providing prompt and helpful assistance.

Image 10.1: Visual guide on how to access customer support via the Amazon store page.