MU Kids Vanity Set with Lighted Mirror and Stool

1. Introduction

Thank you for choosing the MU Kids Vanity Set. This instruction manual provides essential information for the safe assembly, operation, and maintenance of your new vanity set. Please read this manual thoroughly before assembly and retain it for future reference.

Image 1: The MU Kids Vanity Set, featuring a lighted mirror and matching stool.

2. Safety Information

Your child's safety is our top priority. This vanity set is designed with kid-friendly materials and features to ensure a safe play environment. Please observe the following safety guidelines:

• This product meets ASTM F963-17 and CPSIA safety standards.
• All corners are rounded to prevent injuries.
• Ensure all screws and fasteners are securely tightened during assembly and checked periodically.
• Do not allow children to climb on the vanity or stool.
• Keep small parts away from young children to prevent choking hazards.
• Adult supervision is recommended during use.

Image 2: Visual representation of safety standards and rounded edges for child protection.

3. Package Contents

Before beginning assembly, please verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

Image 3: Detailed diagram of all components included in the MU Kids Vanity Set package, along with their dimensions.

1. Vanity Tabletop
2. Vanity Legs (4x)
3. Stool Seat
4. Stool Legs (4x)
5. Lighted Mirror Assembly
6. Storage Shelves (2x)
7. Drawer with Knob
8. Assembly Hardware (screws, bolts, etc.)
9. Instruction Manual

4. Assembly Instructions

Assembly is designed to be straightforward. Follow these steps carefully. A Phillips head screwdriver (not included) is required.

Step 1: Assemble the Stool

1. Attach the four stool legs to the stool seat using the provided screws. Ensure they are securely fastened.

Step 2: Assemble the Vanity Table

1. Attach the four vanity legs to the vanity tabletop using the provided hardware.
2. Slide the drawer into its designated slot under the tabletop.
3. Secure the lighted mirror assembly to the back of the vanity tabletop using the appropriate screws.
4. Attach the two cloud-shaped storage shelves to the sides of the mirror assembly.

Step 3: Final Touches

1. Insert 3 AA batteries (not included) into the battery compartment located on the back of the mirror for the LED lights.
2. Place the vanity set in its desired location. For added stability, anti-tipping hardware is included to secure the vanity to a wall.

Image 4: The fully assembled MU Kids Vanity Set, ready for use.

5. Operating Instructions

Lighted Mirror Operation

The vanity features a two-tone LED lighted mirror. To operate:

• Ensure 3 AA batteries are correctly installed in the battery compartment on the back of the mirror.
• Locate the touch sensor button on the mirror frame.
• Tap the button once to turn on the warm light.
• Tap again to switch to cool white light.
• Tap a third time to turn off the lights.

Image 5: Illustration of the two-color LED lighting modes (6000K Cold White and 3000K Warm White) and battery compartment.

6. Maintenance and Care

To ensure the longevity and appearance of your MU Kids Vanity Set, follow these simple care instructions:

• Cleaning: Wipe the smooth surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Mirror Care: Clean the mirror with a glass cleaner and a soft, lint-free cloth.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Tighten as necessary.
• Storage: If storing the vanity, ensure it is in a dry, cool place away from direct sunlight or extreme temperatures.

7. Troubleshooting

If you encounter any issues with your vanity set, please refer to the following common solutions:

• Lights not working: Check if the 3 AA batteries are correctly inserted and not depleted. Replace batteries if necessary. Ensure the touch sensor is clean and unobstructed.
• Vanity feels wobbly: Re-check all assembly screws and tighten them firmly. Ensure the vanity is placed on a flat, stable surface. Utilize the included anti-tipping hardware to secure it to a wall.
• Drawer sticking: Ensure the drawer is properly aligned on its runners. Clear any debris or objects that may be obstructing its movement.

For further assistance, please contact customer support.

8. Specifications

9. Warranty and Support

For specific warranty information regarding your MU Kids Vanity Set, please refer to the product packaging or contact the retailer where the product was purchased. If you require assistance with assembly, parts, or have any questions, please contact MU customer support through the retailer's platform or the official MU website.