Introduction
Thank you for choosing the ADDIESDIVE AD2075 Automatic Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read it carefully to ensure optimal performance and longevity of your watch.
Product Overview
The ADDIESDIVE AD2075 is a 39mm automatic wristwatch featuring an NH35 mechanical movement, a unique bark texture dial, and a durable sapphire crystal. It is designed for daily wear with 100M water resistance.
Figure 1: Close-up of the ADDIESDIVE AD2075 watch dial.
Setup
Initial Winding
Your ADDIESDIVE AD2075 watch is powered by an automatic mechanical movement (NH35) and does not require a battery. Before first use, or if the watch has stopped, it needs to be manually wound. To do this:
- Ensure the crown is in the fully pushed-in position (Position 0).
- Unscrew the crown counter-clockwise until it springs out slightly (Position 1). This is the winding position.
- Turn the crown clockwise approximately 20 times. This will initiate the movement and build up a power reserve.
- Push the crown back in and screw it clockwise to secure it, ensuring water resistance.
The watch will continue to wind itself through the motion of your wrist while worn. If worn daily for 8-10 hours, manual winding should not be necessary.
Setting the Time and Date
To set the time and date:
- Unscrew the crown counter-clockwise until it springs out slightly (Position 1).
- Gently pull the crown out to the first click (Position 2). This position is for setting the date. Turn the crown clockwise or counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement.
- Gently pull the crown out to the second click (Position 3). This position is for setting the time. Turn the crown to move the hands clockwise until the correct time is displayed. Ensure you differentiate between AM and PM when setting the date.
- Once the time and date are set, push the crown back in to Position 1.
- Screw the crown clockwise firmly against the case to ensure water resistance.
Figure 2: Watch crown in closed position.
Operating Instructions
Automatic Movement
The NH35 automatic movement in your watch is self-winding. It harnesses the kinetic energy from your arm's motion to wind the mainspring. When fully wound, the watch has a power reserve that allows it to run for approximately 41 hours without being worn. If the watch is not worn for an extended period, it will stop and require manual winding as described in the "Initial Winding" section.
Water Resistance (100M)
Your ADDIESDIVE AD2075 watch is rated for 100 meters (10 ATM) of water resistance. This means it is suitable for everyday use, including hand washing, light rain, and accidental splashes. It is not suitable for swimming, diving, or showering with hot water. Always ensure the crown is fully screwed down to maintain water resistance.
Figure 3: ADDIESDIVE AD2075 watch on a wrist.
Luminous Display
The watch features Retro Super BGW9 luminous material on its hands and hour markers. This material absorbs light and glows in low-light conditions, providing clear readability in the dark with a soft blue luminescence.
Figure 4: Luminous display of the watch in low light.
Maintenance
Cleaning
To clean your watch, wipe the case and bracelet with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, ensuring the crown is fully screwed down. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the watch's finish and seals.
Storage
When not wearing your watch for extended periods, store it in a cool, dry place away from direct sunlight, extreme temperatures, and strong magnetic fields. The original gift box is ideal for storage.
Service
Mechanical watches benefit from periodic servicing to maintain accuracy and ensure the longevity of the movement. It is recommended to have your watch serviced by a qualified watchmaker every 3-5 years. This includes cleaning, lubrication, and adjustment of the movement.
Troubleshooting
- Watch not running: Ensure the watch has been manually wound (approx. 20 turns of the crown) or worn for sufficient time to build power reserve.
- Time inaccuracy: Automatic movements can have slight variations. If the watch is consistently gaining or losing significant time (more than +/- 15-20 seconds per day), it may require adjustment by a professional watchmaker.
- Date not changing: Check if the date is being set between 9 PM and 3 AM. If so, adjust the time outside this window and then set the date. Ensure the crown is pulled to the correct position for date adjustment.
- Water ingress: If you notice moisture inside the watch, immediately take it to a professional watchmaker. Do not attempt to open the watch yourself. Ensure the crown is always fully screwed down when near water.
Specifications
| Feature | Detail |
|---|---|
| Model Number | AD2075 |
| Movement | NH35 Automatic Mechanical Movement |
| Case Material | 316L Stainless Steel |
| Case Diameter | 38mm (without crown) |
| Case Length (Lug-to-Lug) | 47.5mm |
| Case Thickness | 10.5mm (including glass) |
| Lug Width | 20mm |
| Crystal | Sapphire Crystal with Blue Light AR Coating |
| Dial Color | Green (Bark Texture) |
| Luminescence | Retro Super BGW9 (Blue Light) |
| Water Resistance | 100M (10 ATM) |
| Crown | Screw-down |
| Band Material | Stainless Steel |
| Clasp Type | Deployment Clasp |
| Item Weight | 300g |
Figure 5: ADDIESDIVE AD2075 watch dimensions.
Warranty and Support
Your ADDIESDIVE AD2075 watch comes with a warranty card included in the gift box. Please refer to this card for specific warranty terms and conditions. For any support inquiries, technical assistance, or warranty claims, please contact the retailer or manufacturer directly using the contact information provided with your purchase or on the official ADDIESDIVE website.
Included Components: Stainless Steel Bracelet, Gift Box, Warranty Card.