1. Introduction
Thank you for choosing the Generic 7W COB LED Recessed Ceiling Downlight. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Safety Information
- Always turn off the main power supply before attempting any installation, maintenance, or cleaning.
- Installation should be performed by a qualified electrician in accordance with local electrical codes.
- Ensure the voltage supply (AC85-265V) matches the requirements of the downlight.
- Do not cover the fixture with insulating material unless specifically designed for it, as this may cause overheating.
- Avoid direct eye exposure to the light source when illuminated.
- Keep the product away from flammable materials.
3. Product Overview
The 7W COB LED Recessed Ceiling Downlight is designed for efficient and high-quality illumination in various settings, including hotel and engineering lighting. It features a high Color Rendering Index (CRI > 80) for accurate color perception and an intelligent driver for stable performance.
Key Features:
- Energy Saving: Advanced COB LED chips provide high lumens with low power consumption (7W).
- High Color Rendering: CRI ≥ 80 ensures vibrant and true-to-life colors.
- Durable Construction: Made from aluminum for effective heat dissipation and extended lifespan.
- Stable Performance: Equipped with a high-quality intelligent power supply driver for stable voltage input and output, and circuit protection.
- Versatile Application: Suitable for various environments including kitchens, living rooms, bedrooms, bathrooms, workplaces, and common areas.
Product Dimensions:
Heat Dissipation Design:
4. Setup and Installation
This downlight is designed for embedded installation. Follow these steps carefully:
- Prepare the Installation Area: Ensure the power supply to the installation area is completely turned off at the circuit breaker.
- Cut the Mounting Hole: Using an appropriate tool, cut a circular hole in the ceiling with a diameter of 55mm (approximately 2.17 inches). Ensure there is sufficient clearance above the ceiling for the fixture's depth (53mm).
- Connect Wiring: Connect the AC85-265V power supply wires to the downlight's driver wires. Ensure proper polarity (Live, Neutral) and secure all connections with appropriate connectors.
- Insert the Downlight: Gently push the spring clips on the sides of the downlight upwards and insert the fixture into the prepared ceiling hole. The clips will spring back down to secure the light in place.
- Restore Power: Once the downlight is securely installed, restore power at the circuit breaker.
5. Operating Instructions
The 7W COB LED Recessed Ceiling Downlight operates by a standard wall switch connected to your electrical circuit. Once installed and power is restored, simply use the wall switch to turn the light on or off.
- Color Temperature: This downlight is available in Warm light (3000K), Neutral light (4000K), or White light (6000K) options. The specific color temperature is selected at the time of purchase and is not adjustable on the installed unit.
- Dimming: The product description mentions compatibility with most dimmers. If you intend to use a dimmer, ensure it is an LED-compatible dimmer switch to avoid flickering or damage.
6. Maintenance
The LED downlight requires minimal maintenance. Follow these guidelines to ensure longevity and optimal performance:
- Cleaning: Ensure the power is off before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Inspection: Periodically check for any loose connections or visible damage. If any issues are found, turn off the power immediately and consult a qualified electrician.
- No User-Serviceable Parts: The LED light source and driver are integrated. Do not attempt to open or repair the fixture yourself.
7. Troubleshooting
If you encounter issues with your downlight, refer to the following troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply Loose wiring connection Faulty switch or circuit breaker | Check if the circuit breaker is tripped. Ensure the wall switch is on. Verify all wiring connections are secure (with power off). Test the switch or circuit breaker. |
| Light flickers | Loose wiring connection Incompatible dimmer switch Voltage fluctuations | Check wiring connections (with power off). Ensure your dimmer is LED-compatible. If voltage fluctuations are suspected, consult an electrician. |
| Light is dim or inconsistent | Incorrect voltage Overheating | Verify the input voltage is within AC85-265V. Ensure the fixture is not covered or in an enclosed space without proper ventilation. |
If the problem persists after following these steps, please contact customer support.
8. Specifications
| Attribute | Detail |
|---|---|
| Brand | Generic |
| Model Number | M5Z7D2263 |
| Power | 7W |
| Voltage | AC85-265V |
| Light Source | COB LED |
| Color Temperature Options | Warm light (3000K), Neutral light (4000K), White light (6000K) |
| Color Rendering Index (CRI) | > 80 |
| Luminous Flux | 680LM |
| Material | Aluminum |
| Diameter | 65 mm |
| Height | 53 mm |
| Mounting Aperture | 55 mm |
| Installation Type | Embedded (Recessed) |
| Average Life Expectancy | Approximately 50,000 hours |
| Certifications | CE, RoHS |
9. Warranty and Support
This product is manufactured with guaranteed quality. While specific warranty terms are not provided, if you have any questions or require assistance, please contact our customer support. We aim to reply within 12 hours to ensure a satisfactory shopping experience.
For support, please refer to the contact information provided by your retailer or on the product packaging.