HEADFOX N2F Wolf Smart Bluetooth Full Face Helmet User Manual

1. Introduction and Overview

The HEADFOX N2F Wolf Smart Bluetooth Full Face Helmet is designed to provide enhanced safety and connectivity for motorcycle riders. This helmet features integrated Bluetooth technology, allowing for hands-free communication, music playback, and navigation. It is ISI certified, ensuring compliance with safety standards.

Key features include:

• Integrated Bluetooth 5.2 for seamless connectivity.
• Environmental Noise Suppression Technology for clear audio.
• Smart Voice Control for hands-free operation.
• Up to 48 hours of talk time and 110 hours of standby on a single charge.
• Fast charging via Type-C port (approximately 3 hours).
• Rear LED lights for improved visibility and safety.
• Dual visor system for day and night riding comfort.
• Durable Acrylonitrile Butadiene Styrene (ABS) shell.

Image: The HEADFOX N2F Wolf Smart Bluetooth Full Face Helmet, showcasing its design and integrated features.

2. Setup

2.1 Unboxing and Initial Inspection

Upon opening the package, ensure all components are present: the HEADFOX N2F Wolf Smart Bluetooth Helmet, a charging cable, and this user manual. Inspect the helmet for any visible damage before first use.2.2 Charging the Helmet

Before initial use, fully charge the helmet's integrated Bluetooth module. Locate the Type-C charging port, typically found near the control buttons on the side of the helmet. Connect the provided charging cable to the helmet and a compatible USB power source. The LED indicator will show charging status (e.g., red for charging, blue/green for fully charged). A full charge takes approximately 3 hours.

2.3 Bluetooth Pairing

To pair your helmet with a mobile device:

1. Ensure the helmet's Bluetooth module is powered off.
2. Press and hold the multi-function button (usually the central button) on the helmet's control panel until the LED indicator flashes rapidly, indicating pairing mode.
3. On your mobile device, go to Bluetooth settings and search for available devices.
4. Select "HEADFOX N2F Wolf" from the list.
5. Once connected, the LED indicator on the helmet will change to a steady blue or flash slowly.

Your helmet is now ready for use with your paired device.

3. Operating Instructions

3.1 Power On/Off

• Power On: Press and hold the multi-function button for approximately 3 seconds until you hear an audible prompt or see the LED indicator light up.
• Power Off: Press and hold the multi-function button for approximately 5 seconds until you hear an audible prompt or the LED indicator turns off.

3.2 Call Management

With your phone paired, you can manage calls directly from your helmet:

• Answer Call: Press the multi-function button once.
• End Call: Press the multi-function button once during an active call.
• Reject Call: Press and hold the multi-function button for 2 seconds when a call comes in.
• Voice Assistant: Double-press the multi-function button to activate your phone's voice assistant (e.g., Siri, Google Assistant) for hands-free commands like making calls or getting directions.

3.3 Music Playback

Control your music directly from the helmet's control panel:

• Play/Pause: Press the multi-function button once.
• Next Track: Press the 'Next' button (usually marked with '>>|').
• Previous Track: Press the 'Previous' button (usually marked with '|<<').
• Volume Up/Down: Use the dedicated volume buttons or long-press the 'Next'/'Previous' buttons, depending on the helmet's specific controls.

3.4 Navigation

When connected to your smartphone, voice navigation prompts from your GPS application will be delivered directly to your helmet's speakers, allowing you to follow directions without looking at your phone.

3.5 Rear LED Lights

The helmet is equipped with rear LED lights to enhance your visibility to other road users, especially during low-light conditions or at night. These lights typically operate automatically when the helmet is powered on or can be manually controlled via a dedicated button, if available. Refer to the specific button layout on your helmet for activation.

Image: Close-up of the helmet's side, highlighting the Bluetooth control panel and the rear LED lights for safety.

3.6 Dual Visor System

The helmet features a dual visor system for adaptable vision:

• Outer Optical Visor: The clear outer visor provides primary protection and clear vision.
• Inner Sun Visor: A retractable tinted inner visor can be deployed to reduce glare in bright sunlight. Operate the lever on the side of the helmet to raise or lower the sun visor as needed.

4. Maintenance

4.1 Cleaning the Helmet Shell and Visors

Clean the helmet shell with a soft, damp cloth and mild soap. Avoid abrasive cleaners or solvents that could damage the finish. For visors, use only water and a microfiber cloth to prevent scratches. The visors can be removed for thorough cleaning if necessary.

4.2 Cleaning Inner Padding

The helmet's inner padding is removable and washable. Gently detach the padding from the helmet shell. Hand wash with mild soap and water, then allow to air dry completely before reattaching. Ensure the padding is fully dry to prevent mildew or odor.

4.3 Battery Care

To prolong battery life, avoid fully discharging the helmet's Bluetooth module frequently. Charge the helmet regularly, even if not in constant use. Store the helmet in a cool, dry place away from extreme temperatures.

5. Troubleshooting

5.1 Bluetooth Not Connecting

• Ensure the helmet is in pairing mode (rapidly flashing LED).
• Check that Bluetooth is enabled on your mobile device.
• Try restarting both the helmet and your mobile device.
• If previously paired, try forgetting the device on your phone and re-pairing.

5.2 No Audio or Poor Sound Quality

• Verify the helmet is properly paired and connected to your device.
• Adjust the volume on both the helmet and your mobile device.
• Ensure the speakers inside the helmet are positioned correctly over your ears.
• Check for any obstructions or damage to the speakers.

5.3 Helmet Not Charging

• Ensure the charging cable is securely connected to both the helmet and the power source.
• Try using a different Type-C charging cable or USB power adapter.
• Check the charging port for any debris or damage.

If issues persist, contact HEADFOX customer support for further assistance.

6. Specifications

7. Warranty and Support

7.1 Warranty Information

The HEADFOX N2F Wolf Smart Bluetooth Full Face Helmet comes with a 1-year manufacturer's warranty from the date of purchase. This warranty covers manufacturing defects. Please retain your proof of purchase for warranty claims.

7.2 Customer Support

For any questions, technical support, or warranty claims, please contact HEADFOX customer service:

• Email: Support@headfox.in
• Manufacturer: GLL industries - Plot No. 18, EPIP, Phase-1, Jharmajri, Baddi 174108
• Packer: HeadFox Innovations Pvt. Ltd, Khasra No.153, RAS Colony, near Golden Era Academy, JDA Colony, Jagatpura, Jaipur, Rajasthan 302017