ANTEQI Portable Pool Vacuum Cleaner Kit User Manual

1. Introduction

Thank you for choosing the ANTEQI Portable Pool Vacuum Cleaner Kit. This manual provides detailed instructions for the safe and efficient assembly, operation, and maintenance of your new pool cleaning device. Designed for versatility, this handheld vacuum is suitable for above-ground, inground, and inflatable pools, ensuring a clean and clear swimming environment.

Image: Overview of the ANTEQI Portable Pool Vacuum Cleaner Kit components.

2. Safety Information

Please read all safety warnings and instructions carefully before using this product. Failure to follow these instructions may result in property damage or injury.

• Always ensure the pool pump is turned off before connecting or disconnecting the vacuum cleaner.
• Do not use the vacuum cleaner if any part is damaged or appears to be malfunctioning.
• Keep children and pets away from the pool area during cleaning operations.
• Store the vacuum cleaner in a cool, dry place away from direct sunlight when not in use.
• This product is designed for pool cleaning only. Do not use for other purposes.

3. Package Contents

Verify that all items listed below are included in your package. If any parts are missing or damaged, please contact customer support.

• 1 x Weighted Triangular Pool Vacuum Head
• 2 x 1.5" x 10ft Pool Hose
• 4 x Attachable Handle Sections (for telescopic pole)
• 1 x Water Outlet Device
• 1 x Expansion Pipe Connector

Image: Detailed view of all components included in the package, with measurements.

4. Setup and Assembly

Follow these steps to assemble your ANTEQI Portable Pool Vacuum Cleaner Kit:

1. Connect the main vacuum head body to one end of an expansion pipe.
2. Connect the other end of the expansion pipe to the expansion pipe connector.
3. Attach the second expansion pipe to the other side of the connector.
4. Connect the assembled expansion pipe to the water outlet device.
5. Assemble the attachable handle sections to form the telescopic pole.
6. Install the assembled telescopic pole onto the rotating joint of the main vacuum head body.
7. Remove the cover of your swimming pool's inlet filter.
8. Install the water outlet device of the vacuum cleaner into the pool's inlet.
9. Adjust the length of the telescopic pole and hose as needed for your pool size.

Image: Visual instructions for assembling the pool vacuum cleaner.

Assembly Video Guide

Video: A detailed guide demonstrating the assembly process of the ANTEQI Portable Pool Vacuum Cleaner.

5. Operating Instructions

Once assembled, the ANTEQI Pool Vacuum Cleaner uses the suction from your pool's filtration pump to effectively clean the pool floor.

1. Ensure the pool pump is running to create suction.
2. Submerge the vacuum head and hose completely into the water to remove any air.
3. Slowly move the vacuum head across the bottom of the pool, covering all areas. The triangular design and weighted head ensure maximum contact and efficient dirt removal.
4. Pay special attention to corners and areas where debris tends to accumulate.
5. The vacuum will absorb sand, gravel, and other small debris through the filtration system.

Image: Illustrates the deep cleaning effectiveness of the vacuum on a pool floor.

Image: Demonstrates the product in use, showing a person cleaning a pool.

Operation Video Guide

Video: A detailed guide demonstrating the operation of the ANTEQI Portable Pool Vacuum Cleaner.

6. Maintenance

Regular maintenance will extend the life of your pool vacuum cleaner and ensure optimal performance.

• Cleaning the Vacuum Head: After each use, rinse the vacuum head thoroughly with fresh water to remove any remaining debris or chemicals.
• Hose Care: Inspect the hoses for kinks, cracks, or blockages. Rinse them out regularly.
• Storage: Store all components in a clean, dry place away from direct sunlight and extreme temperatures. Disassemble the pole and hose for compact storage if desired.
• Filter Maintenance: Regularly clean or replace your pool's filtration pump filter as per your pump's instructions, as this vacuum relies on the pump's suction.

7. Troubleshooting

If you encounter issues with your ANTEQI Pool Vacuum Cleaner, refer to the common problems and solutions below:

8. Specifications

• Brand: ANTEQI
• Model Name: Pool Vacuum with Hose - HY-Pool-02
• Power Source: Manual (relies on pool filtration pump)
• Special Feature: Portable
• Assembly Required: Yes
• Product Dimensions: 7.9 x 6.3 x 60.6 inches (L x W x H)
• Item Weight: 1.65 pounds
• Material: Plastic
• Color: White