1. Introduction
Thank you for choosing the WITMYA Smart Toilet with Bidet, Model WITMYA-BSJ. This advanced one-piece toilet combines modern design with intelligent features for enhanced hygiene and comfort. This manual provides essential information for proper installation, safe operation, and effective maintenance of your new smart toilet. Please read it thoroughly before use and retain it for future reference.
Image: The WITMYA Smart Toilet with Bidet, Model WITMYA-BSJ, showcasing its sleek, modern design in a bathroom setting.
2. Safety Information
To ensure safe operation and prevent damage, please observe the following safety precautions:
- Ensure the toilet is installed by a qualified professional in accordance with local plumbing and electrical codes.
- Do not immerse the product in water or spray water directly onto electrical components. The unit is IPX4 waterproof, protecting against splashing water, but not submersion.
- Do not attempt to disassemble or repair the unit yourself. Contact customer service for assistance.
- Keep children and individuals with reduced physical, sensory, or mental capabilities under supervision when near the toilet.
- Ensure the power outlet is properly grounded and matches the voltage requirements of the toilet.
- Avoid placing heavy objects on the toilet lid or seat.
3. Product Overview and Features
The WITMYA Smart Toilet with Bidet offers a range of advanced functionalities designed for comfort and hygiene.
3.1 Key Features
- Eco-Powerful Dual Flush: Features a 1000g MAP rating and 1.28 GPF water-saving system with a 360° swirling flush. Includes a manual side knob for flushing during power outages.
- Smart Sensing & Hands-free Operation: Microwave induction system for automatic lid opening and closing. Capacitive foot flush sensor for hands-free flushing.
- Foam Shield Technology: Creates a protective barrier to isolate odors and maintain cleanliness.
- Multiple Cleaning Modes: Self-cleaning nozzle with options for feminine care, buttocks cleaning, and massage cleaning.
- Instant Heating: Provides immediate warm water for the bidet, a heated seat, and warm air drying, all with adjustable temperature settings.
- LED Display & Night Light: High-definition LED display shows real-time water and seat temperatures. Ambient night light for nighttime visibility.
- Voice Control: Allows control of various functions using voice commands.
- Compact Design & Safety: One-piece design with an 85mm widened seat and ADA-compliant height. IPX4 waterproof protection and high-quality ceramic glaze.
3.2 Feature Details
Smart Sensing & Hands-free
Image: Diagram illustrating automatic lid opening/closing, foot sensor, remote control, and voice control.
The toilet features a microwave induction system that automatically opens and closes the lid as you approach and leave. A capacitive foot sensor allows for hands-free flushing. All settings can also be adjusted via the wireless remote control or voice commands.
Foam Shield & Aroma Diffuser
Image: Diagram showing the foam shield creating a barrier in the toilet bowl and the aroma diffuser.
Advanced hygiene is provided by Foam Shield Technology, which creates a barrier in the bowl to isolate odors and ensure cleanliness. An integrated aroma diffuser helps suppress odors with a pleasant scent, with a service life of approximately 3 months for replaceable components.
Multiple Cleaning Modes
Image: Illustrations of various bidet cleaning modes including rear washing, lady cleaning, mobile cleaning, children's cleaning, hot & cold cleaning, and nozzle self-cleaning.
The self-cleaning nozzle offers various modes for personalized hygiene, including feminine care, buttocks cleaning, and massage cleaning. The system also features a thermostatic instant heat system for consistent water temperature.
Instant Heating & Drying
Image: Diagrams showing the heated toilet seat and warm air dryer with temperature settings.
The toilet features instant heating for the bidet water, a heated seat that warms up within 1 second, and a warm air dryer. All three functions offer three adjustable temperature settings for customized comfort.
LED Display & Night Light
Image: Close-up of the LED display showing temperature, and an illustration of the ambient night light.
A high-definition LED display shows real-time water and seat temperatures, customizable in Celsius or Fahrenheit. An ambient night light softly illuminates the bathroom for convenience during nighttime use.
Eco-Powerful Dual Flush
Image: Cutaway diagram showing the powerful siphon flush, 360° inner-wall flush, and powerful jet flush mechanisms.
The tankless design incorporates a powerful siphon flush, a 360° inner-wall flush, and a powerful jet flush for efficient and thorough cleaning. This system achieves a 1.28 GPF water-saving rating.
4. Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your WITMYA Smart Toilet. It is recommended that installation be performed by a licensed plumber.
4.1 Package Contents
Before beginning installation, verify that all components are present:
- 1x WITMYA Smart Toilet with Hose and Components Pre-installed
- 1x Wireless Remote Control (includes batteries)
- 1x Angle Valve
- 1x Toilet Seal
- 1x Flange & Screw bolt set
- 1x Installation Manual (this document)
4.2 Dimensions and Water Supply
Image: Diagram showing product dimensions (26.77"D x 15.75"W x 18.89"H) and compatible water supply connections (US NPT 1/2 and US CTS 3/8).
- Product Dimensions: 26.77"D x 15.75"W x 18.89"H.
- Rough-in Distance: Ensure a minimum of 11.8 inches from the wall to the center of the drain.
- Water Supply: The included angle valve is compatible with 1/2" and 3/8" water supply pipes. For a 3/8" pipe, a compression nut and ring are included for proper installation. If a special angle valve is required, please contact customer service.
4.3 Installation Steps (Summary)
- Prepare the installation area, ensuring the water supply is turned off.
- Install the flange and secure it to the floor.
- Connect the water supply hose to the angle valve and the toilet.
- Carefully place the toilet onto the flange, ensuring proper alignment.
- Secure the toilet to the floor using the provided screw bolts.
- Connect the power cord to a grounded electrical outlet.
- Turn on the water supply and check for leaks.
- Perform an initial flush and test all functions.
Refer to the detailed diagrams and instructions in the included installation manual for specific steps and safety warnings.
5. Operating Instructions
Your WITMYA Smart Toilet offers multiple ways to interact with its features.
5.1 Power On/Off
The toilet is designed to be continuously powered. To power off, unplug the unit from the electrical outlet.
5.2 Lid Opening and Closing
- Automatic: The lid will automatically open when you approach the toilet and close after a period of inactivity or after flushing.
- Voice Control: Use commands like "Open the lid" or "Close the lid."
- Remote Control: Use the dedicated buttons on the wireless remote control.
5.3 Flushing
- Foot Sensor: Gently tap your foot near the foot sensor located at the base of the toilet to activate a flush.
- Off-Seat Auto Flush: The toilet will automatically flush after you stand up and move away from the seat.
- Side Knob: A manual knob on the side of the toilet allows for flushing, particularly useful during power outages.
- Remote Control: Use the flush button on the wireless remote control.
- Voice Control: Use commands like "Flush" or "Full flush."
5.4 Bidet Functions
The bidet functions are activated when seated on the toilet.
- Activation: Use the wireless remote control to select desired cleaning modes.
- Modes: Select from Feminine Care, Buttocks Cleaning, or Massage Cleaning.
- Adjustments: Water pressure and temperature can be adjusted via the remote control.
5.5 Heated Seat and Warm Air Dryer
- Heated Seat: The seat automatically heats when you sit down. Temperature can be adjusted via the remote control.
- Warm Air Dryer: Activate the dryer after bidet use via the remote control. Air temperature is adjustable.
5.6 Voice Control
To activate voice control, say "Hello Toilet." Once activated, you can issue commands such as:
- "Open the lid" / "Close the lid"
- "Flush" / "Full flush"
- "Start bidet" (or specific cleaning modes)
- "Adjust seat temperature" (and specify level)
6. Cleaning and Maintenance
Regular cleaning and maintenance will ensure the longevity and hygienic performance of your smart toilet.
6.1 General Cleaning
- Use a soft, damp cloth and mild, non-abrasive cleaner to wipe down the exterior surfaces.
- Do not use harsh chemicals, abrasive pads, or solvents, as these can damage the ceramic glaze and plastic components.
- Ensure no water enters the electrical components during cleaning.
6.2 Nozzle Cleaning
The bidet nozzle features a self-cleaning function. Activate this function via the remote control. Periodically, you may gently wipe the nozzle with a soft cloth and mild cleaner when it is extended.
6.3 Foam Shield and Aroma Diffuser
The aroma diffuser components are replaceable and typically last for 3 months. Refer to the product packaging or contact customer service for replacement parts and instructions.
7. Troubleshooting
If you encounter issues with your WITMYA Smart Toilet, refer to the following common solutions. If the problem persists, contact customer service.
| Problem | Possible Cause | Solution |
|---|---|---|
| Toilet does not flush. | No power; water supply off; sensor obstruction. | Check power connection; ensure water supply valve is open; clear any obstructions from sensors. Use manual side knob if power is out. |
| Bidet water is not warm. | Instant heating not activated; temperature setting too low. | Ensure instant heating is enabled via remote; adjust water temperature setting. |
| Lid does not open/close automatically. | Sensor obstruction; power issue. | Clear any obstructions around the microwave induction sensor; check power connection. |
| Voice control not responding. | Microphone obstruction; incorrect command. | Ensure microphone is clear; use precise commands as listed in section 5.6. |
| Water leakage. | Loose connections; damaged seal. | Turn off water supply immediately. Check all connections for tightness. If problem persists, contact a professional plumber or customer service. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | WITMYA |
| Model Number | WITMYA-BSJ |
| Product Dimensions | 26.77"D x 15.75"W x 18.89"H |
| Material | Ceramic (Toilet), Acrylonitrile Butadiene Styrene (ABS) (Seat) |
| Installation Type | Floor Mounted |
| Shape | Elongated (U-Shape Seat) |
| Item Weight | 85 pounds |
| Water Consumption | 1.28 GPF (Gallons Per Flush) |
| Waterproof Rating | IPX4 |
| Included Components | Angle Valve, Toilet Seal, Flange & Screw bolt, Installation Manual, Smart Toilet with Hose and Components Pre-installed, Wireless Remote Control (with batteries) |
9. Warranty and Support
WITMYA is committed to providing high-quality products and customer satisfaction.
9.1 Warranty Information
The product comes with a 1-year free after-sales service warranty covering quality-related issues. This warranty applies from the date of purchase.
9.2 Customer Support
If you encounter any problems with installation, function, or quality, please do not hesitate to contact WITMYA customer service. We aim to respond within 24 hours to provide assistance.
For further support, please refer to the contact information provided with your purchase or visit the official WITMYA website.