LVSEDTAL ANJ-12000W

LVSEDTAL ANJ-12000W Hybrid Solar Inverter User Manual

Model: ANJ-12000W

1. Introduction

This manual provides essential information for the safe and efficient operation of your LVSEDTAL ANJ-12000W Hybrid Solar Inverter. This device is designed to convert direct current (DC) from solar panels and batteries into alternating current (AC) for household or commercial use, supporting both on-grid and off-grid applications. Please read this manual thoroughly before installation and use.

2. Safety Instructions

Observe the following safety precautions to prevent injury and damage to the inverter:

  • Installation must be performed by qualified personnel.
  • Do not attempt to disassemble or repair the inverter yourself.
  • Ensure proper grounding of the unit.
  • Keep the inverter away from flammable materials and moisture.
  • Verify all wiring connections are secure and correct before powering on.
  • Wear appropriate personal protective equipment (PPE) during installation and maintenance.
  • Disconnect all power sources before performing any service or maintenance.

3. Product Features

The LVSEDTAL ANJ-12000W Hybrid Solar Inverter offers the following key features:

  • Stability: Designed for long-term stable operation.
  • Battery Compatibility: Supports various battery types and allows flexible scheduling of inverter charging and discharging.
  • Versatile Application: Suitable for use as a backup power supply during utility outages.
  • LCD Display Controller: Provides easy access to operating parameters, including battery status and operating temperature.
  • Multiple Protections: Includes temperature-controlled cooling fan, low and high voltage protection, overload protection, short circuit protection, internal fuse, and battery reverse connection protection.

4. Product Components

Familiarize yourself with the components of the ANJ-12000W Hybrid Solar Inverter:

Diagram of LVSEDTAL ANJ-12000W Hybrid Solar Inverter showing front and rear panels with numbered components.

Figure 1: Front and Rear Panel Components of the ANJ-12000W Inverter.

  1. Display screen: Shows operational status, parameters, and error codes.
  2. Pilot lamp: Indicates the inverter's operational status (e.g., AC output, charge, fault).
  3. AC output port: Connection point for AC loads.
  4. AC input port: Connection point for grid or generator AC power.
  5. Port (optional): A general-purpose optional port.
  6. USB port: For data communication or firmware updates.
  7. RS485-1 communication port: For communication with external devices.
  8. RS485-2/CAN port: For advanced communication protocols.
  9. Dry contact port: For external control or signaling.
  10. CT current sensing for self-consumption (optional): Terminal for optional current transformer connection.
  11. ON/OFF rocker switch: Main power switch for the inverter.
  12. Photovoltaic (PV) parameters: Terminals for connecting solar panel input.
  13. Battery parameters: Terminals for connecting battery bank.
  14. Parallel port (parallel module only): For connecting multiple inverters in parallel configuration.
  15. AC input breaker: Circuit breaker for the AC input.
  16. Grounding screw hold: Point for connecting the system ground.

5. Setup and Installation

Proper installation is crucial for the safe and efficient operation of the inverter. It is highly recommended that installation be performed by a certified electrician or solar professional.

5.1 Site Selection

  • Choose a cool, dry, and well-ventilated area.
  • Avoid direct sunlight, high temperatures, and excessive humidity.
  • Ensure sufficient clearance around the inverter for proper airflow and cooling.
  • Mount the inverter vertically on a sturdy surface.

5.2 Wiring Connections

All wiring must comply with local electrical codes and standards. Use appropriately sized cables for all connections.

  1. Grounding: Connect the grounding screw hold (16) to a reliable earth ground.
  2. Battery Connection: Connect the battery bank to the Battery parameters terminals (13). Ensure correct polarity (+ to + and - to -).
  3. PV Input: Connect the solar panel array to the Photovoltaic (PV) parameters terminals (12). Observe correct polarity and voltage limits.
  4. AC Input: Connect the utility grid or generator AC power to the AC input port (4). Ensure the AC input breaker (15) is in the OFF position during connection.
  5. AC Output: Connect your AC loads to the AC output port (3).
  6. Communication Ports: Connect any optional communication cables (USB, RS485, CAN, Dry Contact) as required for monitoring or control.

Warning: Incorrect wiring can cause severe damage to the inverter, batteries, and connected appliances, and poses a risk of electric shock.

6. Operating Instructions

6.1 Powering On

  1. Ensure all wiring connections are secure and correct.
  2. Turn on the battery breaker (if applicable).
  3. Turn on the PV array breaker (if applicable).
  4. Switch the AC input breaker (15) to the ON position.
  5. Finally, switch the ON/OFF rocker switch (11) on the inverter to the ON position.
  6. The display screen (1) will illuminate, and the pilot lamp (2) will indicate the operational status.

6.2 LCD Display and Settings

The LCD display provides real-time information about the inverter's status, input/output voltages, current, power, battery status, and more. Refer to the detailed settings menu in the full product manual for advanced configuration options, such as charge current, output voltage, and operating modes.

6.3 Powering Off

  1. Switch the ON/OFF rocker switch (11) on the inverter to the OFF position.
  2. Switch the AC input breaker (15) to the OFF position.
  3. Turn off the PV array breaker.
  4. Turn off the battery breaker.

7. Maintenance

Regular maintenance ensures optimal performance and longevity of your inverter.

  • Cleaning: Periodically clean the exterior of the inverter with a dry, soft cloth. Ensure ventilation openings are free from dust and debris. Do not use liquid cleaners.
  • Connections: Annually check all electrical connections for tightness and signs of corrosion.
  • Environment: Ensure the installation environment remains within specified temperature and humidity ranges.
  • Battery Check: Regularly inspect battery terminals for corrosion and ensure battery health.

8. Troubleshooting

This section provides solutions for common issues. For complex problems, contact technical support.

ProblemPossible CauseSolution
Inverter not powering onNo battery connection; Battery voltage too low; ON/OFF switch off; AC input breaker off.Check battery connections; Charge batteries; Turn ON/OFF switch on; Turn AC input breaker on.
No AC outputOverload; Short circuit; Inverter in fault mode; AC output breaker tripped.Reduce load; Check for short circuits; Reset inverter; Check AC output breaker.
Low battery voltage alarmInsufficient charging; Excessive load; Battery degradation.Check solar input/grid charging; Reduce load; Inspect batteries.
Over-temperature warningPoor ventilation; High ambient temperature; Blocked cooling fan.Ensure adequate airflow; Relocate inverter if necessary; Clean fan and vents.

9. Specifications

Key technical specifications for the ANJ-12000W Hybrid Solar Inverter:

  • Model: ANJ-12000W
  • Nominal Input Voltage: 120Vac ±5%
  • Nominal Output Power (VA/W): 12000VA/12000W
  • Output Current: 120A
  • Output Frequency: 50HZ/60HZ
  • Output Voltage Waveform: Pure sine wave
  • Max. Bypass Overload Current: 40A
  • Item Weight: 22 pounds
  • Package Dimensions: 0.39 x 0.39 x 0.39 inches
  • Manufacturer: LVSEDTAL

© 2025 LVSEDTAL. All rights reserved.

For technical support, please refer to the official LVSEDTAL website or contact your dealer.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.