FOLOKE 7-in-1 Red Light Therapy Wand User Manual

1. Introduction

The FOLOKE 7-in-1 Red Light Therapy Wand is a versatile skincare device designed for at-home use. It combines various light therapies with micro-vibration and heat to address multiple skin concerns across the face, eyes, neck, hands, and back. Its compact and portable design makes it convenient for daily skincare routines.

Image 1: The FOLOKE 7-in-1 Red Light Therapy Wand, showcasing its sleek design and light therapy head.

Key Features:

• 7-in-1 Skincare Wand: Features Red Light (650~680nm), Green Light (540~560nm), Blue Light (430~450nm), Orange Light (590~610nm), Purple Light (380~420nm), Greenish Light (460nm-490nm), and Light Green Light (380-680nm). Each color targets specific skin needs.
• Portable Design: Compact and easy to use, ideal for travel or home use.
• Deep Nourishment: Enhances skin absorption of skincare products, promoting a radiant, firm, and elastic complexion.
• Home Skincare: Offers professional-grade skincare convenience without salon visits.
• 180° Rotating Massage Head: Ensures comprehensive care for various facial and body areas.
• Safe and Eco-Friendly: Constructed with high-quality materials for durability and safety.

2. Package Contents

Upon opening the package, please ensure all items are present:

• FOLOKE 7-in-1 Red Light Therapy Wand (M5)
• USB Charging Cable (Type-C)
• User Manual

3. Product Specifications

4. Safety Information

Please read and understand all safety instructions before using the device. Failure to do so may result in injury or device malfunction.

• Do not use on broken, irritated, or infected skin.
• Avoid direct eye contact with the LED lights.
• Keep out of reach of children.
• Consult a physician before use if you have any underlying skin conditions, medical implants, or are pregnant.
• Discontinue use if you experience any discomfort, redness, or irritation.
• Do not immerse the device in water.
• Ensure the device is fully charged before initial use.

5. Setup

Charging the Device:

Before first use, fully charge the device. Connect the provided USB Type-C charging cable to the charging port on the device and a suitable USB power adapter (not included). The green light will flash during charging and remain solid green when fully charged.

6. Operating Instructions

Device Controls:

• Power Button / Mode Button: Long press to turn ON/OFF. Short press to switch between light modes.
• Intensity Button: Short press to switch between 1st, 2nd, and 3rd gear (vibration intensity).
• Gear Indicators: Corresponding to 1st, 2nd, 3rd gear.
• Power Indicator: Green light always on (working state/standby), red light flashing (low battery/need charge), green light flashing (charging), green light always on (fully charged).

Image 2: Illustration of the three adjustable modes: Normal, Heating with strong vibration, and Heating with medium vibration.

Light Therapy Functions:

The device features 7 different LED light treatments:

• Red Light (650~680nm): Nourishing and rejuvenating, promotes collagen regeneration.
• Green Light (540~560nm): Balances water and oil, refines the skin.
• Blue Light (430~450nm): Anti-inflammatory, targets bacteria, helps with pore convergence.
• Orange Light (590~610nm): Reduces redness, brightens skin tone.
• Purple Light (380~420nm): Intensive treatment to clear acne and wrinkles.
• Greenish Light (460nm-490nm): Soothing and energizing.
• Light Green Light (380-680nm): Reduces discoloration and promotes relaxation.

Image 3: Visual guide to the 7 different LED light treatments and their specific benefits for the skin.

Application Steps:

1. Skin Preparation: Cleanse your skin thoroughly and apply your preferred serum or moisturizer to the target areas. Gently massage until fully absorbed.
2. Activate Device: Long press the Power Button to turn on the wand.
3. Select Mode and Intensity: Short press the Power Button to cycle through the 7 light modes. Use the Intensity Button to adjust the vibration level (1-3) according to your comfort.
4. Apply to Skin: Gently glide the 180° rotating massage head over the desired areas (eyes, face, neck, hands, back) using slow, upward motions. The device will activate upon contact with the skin.
5. Targeted Areas:
   • Forehead: Start at the center of the forehead or hairline and slowly move to the temples.
   • Nose Area: Slowly glide upward to the cheeks.
   • Chin: Massage from the center of the chin upwards in very slow gliding movements.
   • Eye Area: Massage around the eyes with very slow pressure.
   • Neck: Massage from the edge of the neck in slow upward strokes along the neck.
6. Conclude: After your session, power down the wand by long pressing the Power Button. Gently clean the device with a soft, dry cloth.

Image 4: Visual guide demonstrating how to apply the wand to different areas of the face and neck.

7. Recommended Treatment

For optimal results, use the device 3-5 times a week for 5-10 minutes per session. Consistency is key for visible improvements.

Gradual Adaptation:

1. Initial Use: Start at the lowest setting (Level 1 vibration) and test on your hands to ensure no discomfort. Avoid using Level 3 directly on the face initially.
2. Adaptation Phase: After testing on hands, apply Level 1 on the face for 5 minutes, 3-5 times a week, gradually acclimating your skin.
3. Gradual Increase: After acclimation, gradually transition to Level 2 for 5 minutes, 3-5 times a week.
4. Intensive Phase: Gradually transition to Level 3 for 5 minutes, 3-5 times a week.

Caution: Starting at the highest setting (Level 3) directly on the face may cause stinging. If discomfort is experienced, adjust the duration or frequency of use to ensure safety and comfort.

Image 5: A step-by-step guide for recommended treatment, from initial use to intensive phase.

8. Maintenance

• Cleaning: After each use, wipe the device head with a soft, dry cloth or paper towel. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the device in a cool, dry, and well-ventilated place, away from direct sunlight and moisture.
• Charging: Ensure the device is charged regularly to maintain battery health, even if not used frequently.

9. Troubleshooting

If you encounter any issues with your FOLOKE 7-in-1 Red Light Therapy Wand, please refer to the following general tips:

• Device not turning on: Ensure the device is fully charged. If the issue persists, try connecting it to a different power source.
• Lights not changing: Short press the Power Button to cycle through the modes. If unresponsive, ensure the device is charged.
• No vibration: Short press the Intensity Button to adjust the vibration level. Ensure the device is in contact with your skin for activation.
• Skin discomfort: Reduce the intensity level or frequency of use. Ensure your skin is clean and moisturized before use.

If problems persist, please contact customer support for further assistance.

10. Warranty and Support

For warranty information, product support, or any inquiries, please refer to the contact details provided in your product packaging or visit the official FOLOKE website. Keep your purchase receipt for warranty claims.