1. Product Overview
The Pemberly Row Steel and Glass TV Stand is designed to support flat panel televisions up to 55 inches and weighing up to 99 lbs. It features black tempered glass shelves and durable chrome-finished steel legs, offering a modern aesthetic. The stand's angled corners allow for versatile placement, including in room corners, to optimize space and viewing angles. The middle and bottom shelves are suitable for various audio-visual components, each supporting up to 44 lbs.
Image 1.1: The Pemberly Row TV Stand in a typical living room setup.
Image 1.2: Key features of the TV stand, including tempered glass and corner design.
2. Safety Information
- Read all instructions carefully before assembly and use.
- Do not exceed the maximum weight capacities: 99 lbs for the top shelf (TV), and 44 lbs for each of the middle and bottom shelves.
- Ensure all connections are secure before placing any items on the stand.
- Place the TV stand on a level and stable surface to prevent tipping.
- Keep children and pets away from the assembly area.
- Avoid placing hot items directly on the glass surfaces without protective mats.
- Do not stand or climb on the TV stand.
3. Package Contents
Please verify that all components are present before beginning assembly:
- Tempered Glass Shelves (3 pieces: 1 top, 2 lower)
- Steel Support Legs/Posts (various lengths)
- Assembly Hardware (screws, washers, foot caps)
- Instruction Manual
4. Setup and Assembly
This TV stand is designed for easy, tool-free assembly. Follow these steps:
- Unpack all components and lay them out on a soft, clean surface to prevent scratching.
- Identify the top glass shelf, which may have pre-attached fittings for the first set of legs.
- Attach the first set of steel support legs to the underside of the top glass shelf by simply screwing them in by hand.
- Place the next glass shelf onto the attached legs and secure it by screwing in the next set of legs through the pre-drilled holes.
- Repeat the process for the final glass shelf and the bottom set of legs.
- Ensure all legs are tightened securely by hand. Do not overtighten.
- Attach the floor-saving foot caps to the bottom of the lowest legs.
- Carefully turn the assembled stand upright and place it in its desired location.
Image 4.1: Visual guide for the tool-free assembly process.
5. Operating Instructions
Once assembled, the TV stand is ready for use. Follow these guidelines:
- TV Placement: Carefully place your television on the top glass shelf. Ensure the TV's base fits within the dimensions of the top shelf. The stand supports TVs up to 55 inches and 99 lbs. For TVs with wide-spread feet, measure your TV's base to confirm compatibility.
- Component Placement: Use the middle and bottom shelves for your audio-visual components such as soundbars, gaming consoles, or media players. Each lower shelf can hold up to 44 lbs. The open-shelf design promotes excellent ventilation, minimizing the risk of overheating for your electronics.
- Cable Management: While not explicitly designed for hidden cable management, the open design allows for easy routing and access to cables. Consider using cable ties (not included) to keep wires tidy.
- Corner Placement: The stand's angled corners are specifically designed to fit snugly into room corners, maximizing space efficiency.
Image 5.1: TV stand supporting a 55-inch TV, illustrating weight capacity.
6. Maintenance
To maintain the appearance and longevity of your TV stand:
- Cleaning Glass Surfaces: Use a soft, lint-free cloth and a standard glass cleaner. Avoid abrasive cleaners or scouring pads, which can scratch the glass.
- Cleaning Metal Parts: Wipe chrome-finished legs with a soft, damp cloth. For stubborn marks, a mild soap solution can be used, followed by drying thoroughly. Avoid harsh chemicals.
- Regular Checks: Periodically check all connections and screws to ensure they remain tight. Retighten by hand if necessary.
- Avoid Overloading: Adhere to the specified weight limits for each shelf to prevent damage or structural failure.
7. Troubleshooting
- Stand feels wobbly: Ensure the stand is on a level surface. Check that all support legs are fully and securely tightened.
- Scratches on glass: Minor scratches can sometimes be minimized with specialized glass scratch repair kits (not included). Prevent future scratches by avoiding abrasive materials and placing protective pads under heavy or sharp objects.
- Difficulty assembling: Review the assembly steps and diagrams carefully. Ensure you are using the correct components for each step. If a part seems difficult to fit, double-check its orientation.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | PR-4753-2577784 |
| Materials | Steel, Tempered Glass |
| Finish | Chrome effect, Black Glass |
| Assembled Dimensions (W x D x H) | 44.88" x 17.72" x 19.69" |
| Top Shelf Weight Capacity | Up to 99 lbs (for TVs up to 55") |
| Middle & Bottom Shelves Weight Capacity | Up to 44 lbs each |
| Item Weight | 42.2 lbs |
| Mounting Type | Floor Mount |
| Movement Type | Stationary |
Image 8.1: Detailed dimensions of the TV stand.
9. Warranty Information
For warranty details, please refer to the product description on the original purchase platform or visit the official Pemberly Row store page. Warranty terms and conditions may vary.
Visit the Pemberly Row Store for more information.
10. Support
For further assistance, questions, or to report missing/damaged parts, please contact Pemberly Row customer support through the retailer where the product was purchased. You may also find additional resources on the official Pemberly Row brand store.
Pemberly Row Official Store: https://www.amazon.com/stores/PEMBERLYROW/page/581E11D8-B460-400A-9C53-4D69CEE8DBC9