DurayLoly 10-Drawer Dresser with LED Light & Charging Station (Model B0F6JQTSTZ) Instruction Manual

1. Introduction

Thank you for purchasing the DurayLoly 10-Drawer Dresser with LED Light & Charging Station. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Warnings

• WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent tip-over, this furniture must be permanently attached to the wall using the anti-tip hardware provided.
• Do not allow children to climb on drawers or shelves.
• Always place heavier items in the lowest drawers.
• Ensure all screws and fasteners are securely tightened before use.
• Keep small parts away from children during assembly.

2. Package Contents

Before assembly, please verify that all components listed below are present. If any parts are missing or damaged, please contact customer support.

Image: All components of the dresser laid out on a carpeted floor, including metal frames, wooden panels, fabric drawers, and hardware bags.

3. Setup and Assembly

Follow these step-by-step instructions for proper assembly. All parts are labeled with numbers or letters for easy identification. A screwdriver and Allen wrench are included.

Step 1: Assemble Base Frames

• Attach adjustable feet (H) to the bottom of metal frames (6) and (7).
• Connect frames (6) and (7) using crossbars (12) and screws (B).
• Attach side frames (4) and (5) to the top of the base frames using screws (C).

Step 2: Install Wooden Panels and Hutch

• Secure the top wooden panel (1) to the assembled frame using screws (B).
• Attach the back panel (3) for the hutch section using screws (P).
• Install the side wooden panels (2) for the hutch section.

Image: A fully assembled DurayLoly 10-drawer dresser in a bedroom, showcasing the LED lighting in the open shelf and the charging station on top.

Step 3: Attach Charging Station and LED Lights

• Carefully place the charging station (M) into the designated cutout on the top panel (1) and secure with screws (E).
• Adhere the LED light strip (M) to the underside of the top panel within the hutch section. Use the provided clips (K) and screws (D) for extra security.
• Connect the LED light strip to the charging station.

Image: A close-up view of the integrated charging station on the dresser's top surface, featuring two AC outlets and two USB ports, with a phone charging.

Step 4: Prepare and Insert Fabric Drawers

• Unfold each fabric drawer (15, 17, 19) and insert the bottom panel (16) to create a sturdy box.
• Attach the handles (J) to the front of each drawer using screws (D).
• Slide the assembled drawers into their respective compartments in the dresser frame.

Image: An exploded view diagram illustrating the layers of the thickened fabric drawer, including cationic fabric and MDF board, highlighting its non-deformable quality compared to a standard fabric drawer.

Step 5: Secure Anti-Tip Hardware

• Position the dresser in its desired location.
• Attach the anti-tip hardware (L, R) to the top rear of the dresser and secure it to a wall stud using appropriate wall anchors and screws (not always included, check local hardware store).
• Ensure the dresser is stable and level.

Image: The dresser placed in a child's bedroom, with some drawers open revealing clothes, and the hutch section displaying books and small decorative items.

4. Operating Instructions

Using the LED Lights

The integrated LED lights in the hutch section can be controlled using the provided remote control.

• Power On/Off: Press the red power button.
• Color Selection: Choose from 7 static color modes using the color buttons.
• Dynamic Modes: Select from 7 dynamic color modes (e.g., fade, flash, strobe) using the "MODE" buttons.
• Brightness/Speed: Adjust brightness using "BRIGHT +/-" and dynamic mode speed using "SPEED +/-".

Image: The dresser's hutch section illuminated by an RGB LED strip, with icons indicating 20 static and 20 dynamic modes, and remote control functionality.

Using the Charging Station

The built-in charging station provides convenient power access for your electronic devices.

• Plug the dresser's main power cord into a standard wall outlet.
• Use the two AC outlets for devices requiring standard power.
• Use the two USB ports to charge compatible phones, tablets, and smart devices.

5. Maintenance

• Cleaning: Wipe down the metal frame and wooden surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Fabric Drawers: The fabric drawers can be spot cleaned with a mild detergent and water. Allow to air dry completely. Do not machine wash.
• Tightening: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten as necessary.
• Anti-Tip Hardware: Regularly inspect the anti-tip hardware for any signs of wear or loosening.

6. Troubleshooting

Dresser is Wobbly:

• Ensure all screws are fully tightened.
• Adjust the leveling feet (H) on the bottom of the frame to stabilize the dresser on uneven floors.
• Verify that the anti-tip hardware is securely installed.

LED Lights Not Working:

• Check if the dresser's main power cord is securely plugged into a working outlet.
• Ensure the LED light strip is properly connected to the charging station.
• Verify the remote control battery is functional.

Charging Station Not Providing Power:

• Confirm the dresser's main power cord is plugged in.
• Test the outlet with another device to ensure it is working.
• Ensure devices are properly connected to the AC outlets or USB ports.

7. Specifications

Image: A diagram illustrating the precise dimensions of the DurayLoly 10-drawer dresser, including width, depth, and height, along with individual drawer dimensions.

8. Warranty and Support

Warranty Information

This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included in your package for specific terms and conditions. Keep your purchase receipt as proof of purchase.

Customer Support

Should you have any questions about the product, require assistance with assembly, or need to report missing/damaged parts, please email our customer service team. They will promptly provide an appropriate solution.

Contact information for customer service is typically found on the "Aftersale Service" card included in your package.