SPA4PIEDS Collapsible Foot Spa Bath Massager (Model: SPA10) - Instruction Manual

1. Introduction

Thank you for choosing the SPA4PIEDS Collapsible Foot Spa Bath Massager. This manual provides essential information for the safe and effective operation, maintenance, and care of your new foot spa. Please read it thoroughly before first use and retain it for future reference.

2. Safety Information

To ensure safe operation, please observe the following precautions:

• This foot bath is designed for heat retention, not for heating cold water. Always add warm water for optimal results.
• Do not use the foot spa if you have any open wounds, infections, or skin conditions on your feet or legs.
• Consult a physician before use if you are pregnant, have diabetes, circulatory problems, or any other medical conditions that may be affected by heat or water immersion.
• Always unplug the foot spa from the power source before cleaning, filling, draining, or storing.
• Keep the foot spa out of reach of children and pets when not in use.
• Ensure the power cord is not damaged, pinched, or placed under heavy objects.
• Do not immerse the main unit (electrical components) in water.
• Lower the support rod completely for improved bubble generation during use.

For any questions regarding product features, please contact customer support at SPA4PlEDSService@hotmail.com.

3. Product Components

The SPA4PIEDS Collapsible Foot Spa Bath Massager includes the following key components:

• Collapsible Tub: For space-saving storage.
• One-Knob Control: For easy selection of operating modes.
• Heat-Maintaining Element: Helps retain water temperature.
• Surfing Bubble Jets: Provide a soothing bubble massage.
• Raised Massage Nodes: For gentle foot stimulation.
• Red Light: For enhanced relaxation.
• 8 Shiatsu Massage Rollers: Non-motorized, detachable for manual massage.
• Sturdy Handle: For easy portability.
• Double-Sided Foot File: For exfoliation and smoothing.

Figure 3.1: Overview of Foot Spa Components.

4. Setup

Follow these steps to set up your foot spa for first use:

1. Unpack: Carefully remove all components from the packaging.
2. Expand: Place the collapsed foot spa on a flat, stable surface. Gently pull up the sides to expand the tub to its full height. Ensure the support rod is securely in place.
3. Fill with Water: Fill the foot spa with warm water up to the maximum fill line indicated inside the tub. Do not overfill.
4. Add Additives (Optional): You may add your preferred foot salts or essential oils to the water.
5. Connect Power: Plug the power cord into a standard electrical outlet.

Figure 4.1: Foot Spa Ready for Use.

5. Operating Instructions

Once set up, operate your foot spa using the single knob control:

1. Position Feet: Place your feet into the foot spa, ensuring they are fully submerged and comfortably resting on the massage rollers and nodes.
2. Select Mode: Rotate the one-knob control to select your desired operating mode:
• Mode 1: Heat-Maintaining + Bubbles + Vibrations
• Mode 2: Heat-Maintaining + Red Light
• Mode 3: Bubbles + Vibrations + Red Light Off
3. Relax: Enjoy the massage and relaxation for approximately 15-20 minutes.
4. Adjust Support Rod: For improved bubble generation, ensure the internal support rod is lowered to its secure position.

Figure 5.1: User enjoying the foot spa.

6. Maintenance

Proper maintenance ensures the longevity and hygiene of your foot spa:

1. Drain Water: After each use, unplug the unit and carefully drain the water from the tub.
2. Clean Tub: Clean the interior of the foot spa with mild soap and water. Use a soft cloth or sponge.
3. Clean Rollers: The massage rollers are detachable for thorough cleaning. Remove them and wash separately if needed.
4. Rinse: Rinse the tub thoroughly to remove any soap residue.
5. Dry: Allow the foot spa to air dry completely before collapsing and storing.
6. Storage: To collapse, gently push down on the sides until the tub folds flat. Store in a cool, dry place, such as under a sofa, bed, or in a closet shelf.

Figure 6.1: Collapsing the Foot Spa for Storage.

Figure 6.2: Carrying the Foot Spa with its Sturdy Handle.

Included Pedicure Tool: The double-sided foot file can be used before or after your foot spa session. Use the coarse side to remove dead skin and calluses, and the finer side to smooth and soften your feet.

7. Troubleshooting

If you encounter any issues with your foot spa, please refer to the following common solutions:

If the problem persists after attempting these solutions, please contact SPA4PIEDS customer support.

8. Specifications

9. Warranty and Support

For customer support, technical assistance, or warranty inquiries, please contact SPA4PIEDS directly:

• Email: SPA4PlEDSService@hotmail.com
• Availability: 24/7 Customer Support

Please have your model number (SPA10) and purchase information ready when contacting support.