Anysun 9'' IPS Monitor Replacement for F5860 & F5890 Sewer Camera Systems

1. Introduction

This manual provides essential information for the proper installation, operation, and maintenance of your Anysun 9-inch IPS monitor, designed as a replacement part for Anysun F5860 and F5890 series sewer camera systems. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

2. Package Contents

Upon opening the package, please verify that all components are present and undamaged:

• Anysun 9'' IPS Monitor (x1)

If any items are missing or damaged, please contact Anysun customer support immediately.

3. Compatibility Information

IMPORTANT: This 9-inch IPS monitor is ONLY suitable for Anysun Video Inspection Systems Models F5860 and F5890.

Before installation, it is crucial to confirm the compatibility of this replacement screen with your specific Anysun sewer camera model. Using this monitor with incompatible systems may result in malfunction or damage.

If you are unsure about compatibility, please contact Anysun customer support with images of your existing sewer camera unit to expedite the confirmation process.

4. Product Overview

The Anysun 9'' IPS Monitor provides a clear and detailed display for your sewer inspection tasks. Below is an image illustrating the monitor's interface and controls.

Figure 1: Anysun 9'' IPS Monitor Front Panel
This image shows the front of the Anysun 9-inch IPS monitor. The screen displays a live view of a sewer pipe with bright illumination, showing a voltage reading (DC: 11.3V), depth (0.1Ft), and date/time (8/04/2024 16:20:50). The top right corner indicates "AHD1". Below the screen, several control buttons are visible: "CHARGER" (charging indicator), "TF" (TF card slot), "CLEAR" (clear button), "REC" (record), "PLAY" (playback), "MENU/EXIT" (menu/exit), ">/PHPTO" (photo/right navigation), "

4.1. Control Buttons and Indicators

• CHARGER Indicator: Illuminates when the monitor is connected to a power source and charging.
• TF Card Slot: For inserting a TF (MicroSD) card to store recorded video and images.
• CLEAR Button: Used to clear certain settings or data.
• REC Button: Initiates or stops video recording.
• PLAY Button: Accesses recorded media for playback.
• MENU/EXIT Button: Enters the system menu or exits current menu/mode.
• >/PHPTO Button: Navigates right in menus or captures a still photograph.
• </ZOOM Button: Navigates left in menus or controls digital zoom.
• ON/OF Button: Powers the monitor on or off.
• SIBS Button: Specific function, potentially related to side-view camera or auxiliary input. Refer to your main F5860/F5890 system manual for details.
• LED Button: Controls the intensity or on/off state of the camera's LED lights.

5. Setup Instructions

This section outlines the steps to properly connect and prepare your new Anysun 9'' IPS monitor with your compatible F5860 or F5890 sewer camera system.

1. Power Off: Ensure your Anysun F5860 or F5890 sewer camera system is completely powered off before attempting to replace or connect the monitor.
2. Disconnect Old Monitor (if applicable): Carefully disconnect any existing monitor from the main control unit. Note the connection type and orientation.
3. Connect New Monitor: Align the connector of the new 9'' IPS monitor with the corresponding port on your F5860 or F5890 control unit. Gently push to ensure a secure connection. Do not force the connection.
4. Secure Connection: If your system uses a threaded or locking connector, ensure it is tightened securely to prevent accidental disconnection during operation.
5. Power On: Once the monitor is securely connected, power on your Anysun sewer camera system. The monitor should display the live feed from the camera.
6. Initial Check: Verify that the image is clear, and all monitor functions (buttons, menu navigation) are responsive.

6. Operating Instructions

The Anysun 9'' IPS monitor functions as the primary display and control interface for your F5860/F5890 sewer camera system. Refer to your main F5860/F5890 system manual for comprehensive operational details. This section covers monitor-specific operations.

6.1. Powering On/Off

• To power on, press and hold the ON/OF button until the screen illuminates.
• To power off, press and hold the ON/OF button until the screen shuts down.

6.2. Recording Video and Capturing Photos

Ensure a TF (MicroSD) card is inserted into the TF card slot before attempting to record or capture images.

• Video Recording: Press the REC button once to start recording. The recording indicator (often a red dot or "REC" text) will appear on the screen. Press REC again to stop recording.
• Photo Capture: During live view, press the >/PHPTO button once to capture a still image.

6.3. Playback

• Press the PLAY button to enter playback mode.
• Use the >/PHPTO and </ZOOM buttons to navigate through recorded videos and images.
• Press PLAY again to start/pause playback of a selected file.
• Press MENU/EXIT to exit playback mode.

6.4. Menu Navigation

• Press the MENU/EXIT button to access the system settings menu.
• Use the >/PHPTO and </ZOOM buttons to navigate through menu options.
• Press REC or PLAY (depending on the system) to select an option or confirm a setting.
• Press MENU/EXIT to exit the menu.

6.5. LED Light Control

• Press the LED button to adjust the brightness of the camera's LED lights or to turn them on/off. Multiple presses may cycle through different brightness levels.

7. Maintenance

Proper maintenance ensures the longevity and reliable performance of your Anysun 9'' IPS monitor.

• Cleaning: Use a soft, dry, lint-free cloth to clean the monitor screen. For stubborn smudges, lightly dampen the cloth with water or a screen-safe cleaning solution. Avoid abrasive materials or harsh chemicals.
• Storage: When not in use, store the monitor in a clean, dry environment, away from direct sunlight, extreme temperatures, and excessive dust.
• Handling: Avoid dropping the monitor or subjecting it to strong impacts. Do not attempt to disassemble the monitor, as this will void the warranty.
• Battery Care: If the monitor has an internal battery (check your main system manual), follow recommended charging practices to prolong battery life. Avoid fully discharging the battery frequently.

8. Troubleshooting

This section addresses common issues you might encounter with your Anysun 9'' IPS monitor. For more complex problems, refer to your main F5860/F5890 system manual or contact customer support.

8.1. No Display on Monitor

• Check Power: Ensure the main sewer camera system is powered on and the monitor is receiving power.
• Check Connection: Verify that the monitor is securely connected to the main control unit. Disconnect and reconnect if necessary.
• Battery Level: If the monitor has an internal battery, ensure it is sufficiently charged.
• Compatibility: Double-check that this monitor is indeed compatible with your F5860 or F5890 system.

8.2. Buttons Not Responding

• Restart System: Power off the entire system, wait a few seconds, and then power it back on.
• Check for Debris: Ensure no debris is lodged around the buttons.

8.3. Poor Image Quality

• Clean Screen: Clean the monitor screen as described in the Maintenance section.
• Camera Lens: Ensure the camera lens itself is clean and free of obstructions.
• Lighting: Adjust the camera's LED lights using the LED button for optimal illumination.

9. Specifications

Key technical specifications for the Anysun 9'' IPS Monitor:

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your original Anysun F5860 or F5890 sewer camera system, or visit the official Anysun website. You may also contact the seller directly for assistance.

Please retain your purchase receipt as proof of purchase for warranty claims.