XFHDHR Stainless Steel Bowl User Manual

1. Introduction

This manual provides instructions for the XFHDHR Stainless Steel Bowl, designed as a compatible accessory for Bear ZDQ-2201, Q05E3, D05Z2, and T10Y2 blenders. This food-grade 304 stainless steel bowl is uncoated, offering durability and resistance to deformation, breakage, and wear. Its robust construction allows it to withstand the strong power and impact of blenders, making it suitable for various mixing and grinding tasks. The bowl features a metallic luster and an elegant appearance.

Image 1: Angled view of the XFHDHR Stainless Steel Bowl, highlighting its smooth interior and the 'SUS304' material marking.

2. Safety Information

• Before first use, wash the bowl thoroughly.
• Always ensure the bowl is properly seated in your compatible blender according to your blender's instructions.
• Do not use the bowl if it is damaged or deformed.
• Keep out of reach of children when not in use.
• Always unplug the blender before attaching or removing the bowl.

3. Setup

1. Unpack the stainless steel bowl from its packaging.
2. Wash the bowl with warm, soapy water and rinse thoroughly before its first use. Dry completely.
3. Ensure your Bear ZDQ-2201, Q05E3, D05Z2, or T10Y2 blender is unplugged and turned off.
4. Carefully place the stainless steel bowl onto the blender base, ensuring it fits securely and is stable. Refer to your blender's specific manual for proper attachment procedures.

Image 2: Top-down view of the XFHDHR Stainless Steel Bowl, illustrating its design for blender compatibility.

4. Operating Instructions

The XFHDHR Stainless Steel Bowl is designed for use with compatible Bear blenders for various food preparation tasks.

1. After securely attaching the bowl to your blender, add your ingredients. Do not overfill the bowl beyond the maximum capacity recommended by your blender's manufacturer.
2. Operate your blender according to its specific instructions for mixing, grinding, or other processes. The durable 304 stainless steel construction is built to withstand the forces generated by the blender.
3. Always ensure the blender lid is properly secured before operation to prevent spills.

5. Maintenance and Care

Proper care will extend the life of your stainless steel bowl.

1. After each use, remove the bowl from the blender base.
2. Wash the bowl immediately with warm water and a mild dish soap. Use a soft sponge or cloth to clean the interior and exterior. Avoid abrasive cleaners or scouring pads, which can scratch the surface.
3. Rinse thoroughly to remove all soap residue.
4. Dry the bowl completely with a clean towel to prevent water spots and maintain its luster.
5. The bowl is dishwasher safe; however, hand washing is recommended for best results and to preserve its finish.
6. Store the bowl in a clean, dry place.

6. Troubleshooting

Issue: Bowl does not fit securely on the blender base.

Solution:

• Ensure you are using a compatible Bear blender model (ZDQ-2201, Q05E3, D05Z2, T10Y2).
• Check for any obstructions on the blender base or the bowl's bottom.
• Verify the bowl is oriented correctly according to your blender's design.

Issue: Water spots or dull finish after washing.

Solution:

• Ensure the bowl is thoroughly dried immediately after washing.
• Use a soft cloth to buff the surface after drying to restore shine.
• Avoid leaving the bowl to air dry, especially in hard water areas.

7. Specifications