MFFM Modern Backless Bar Stools (Set of 4, Counter Height, White) Instruction Manual

Introduction

Thank you for choosing the MFFM Modern Backless Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain this manual for future reference.

Safety Information

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble on a soft, clean surface to prevent scratching.
• Tighten all screws firmly, but do not overtighten. Periodically check and re-tighten all fasteners to ensure stability.
• Do not stand on the stool. Use only for seating.
• Maximum weight capacity: 250 lbs.
• Keep children away during assembly. Small parts may pose a choking hazard.

Package Contents

Please verify that all components are included in your package:

• 4 x Upholstered Seats (White)
• 4 x Stool Frames (Black Metal)
• 8 x Wooden Footrests
• 1 x Hardware Pack (Screws, Allen Wrench)
• 2 x Complimentary Seat Cushion Covers (Green)

Image: A set of four MFFM Modern Backless Bar Stools, featuring white upholstered seats, black metal frames, and wooden footrests. These are counter height stools.

Assembly Instructions

Follow these steps to assemble your MFFM Bar Stools. Assembly is quick and straightforward.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, flat surface to prevent damage.
2. Attach Footrests to Frame: Identify the two wooden footrests for each stool frame. Align the footrests with the pre-drilled holes on the metal frame. Secure them using the provided screws and Allen wrench. Ensure they are firmly attached.
   

   Image: A detailed view of the solid wood decorative footrest, highlighting its attachment to the metal frame.

3. Attach Seat to Frame: Place the upholstered seat upside down. Align the stool frame with the mounting points on the underside of the seat. Secure the seat to the frame using the remaining screws. Tighten all screws evenly.
4. Check Stability: Once assembled, gently shake the stool to ensure all connections are secure and the stool is stable. Adjust foot nails if necessary to prevent wobbling.
   

   Image: A close-up of an adjustable foot nail, designed to protect the floor and ensure stability.

5. Optional: Apply Green Cushion Covers: If desired, place the complimentary green cushion covers over the white upholstered seats. These covers are removable and washable.
   

   Image: A green fabric cover being applied to a stool seat, demonstrating the optional accessory.

Operating Instructions

These bar stools are designed for comfortable seating in various settings.

• Use the stools on a flat, stable surface to prevent tipping.
• When moving the stools, lift them rather than dragging to prevent damage to the floor or the stool legs.
• The footrests are provided for comfort and support.

Image: A single bar stool showcasing its key features: soft cushion, high-strength iron frame, retro solid wood footrest, and adjustable foot nails.

Maintenance and Care

• Cleaning the Upholstered Seat: For general cleaning, use a soft, damp cloth with mild soap. For stubborn stains, refer to fabric care instructions. The complimentary green covers are machine washable.
• Cleaning the Frame: Wipe the metal frame with a soft, dry cloth. Avoid abrasive cleaners.
• Footrests: Wipe wooden footrests with a damp cloth and dry immediately.
• Regular Checks: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten as needed.

Troubleshooting

Specifications

Image: A detailed dimension diagram of the bar stool, indicating length, width, and height measurements.

Warranty and Support

For warranty information or customer support, please contact MFFM directly through their official website or the retailer where the product was purchased. Please have your model number (MF-9001) and purchase details ready.