1. Introduction
This manual provides essential instructions for the safe and efficient use of your Xininyia H80 Smart Watch Charger. This product includes two magnetic charging cables designed for compatibility with the Mindrose H80 1.47" Fitness Tracker Smartwatch. Please read this manual thoroughly before use to ensure optimal performance and longevity of your charger.
Image 1.1: Two Xininyia H80 magnetic smart watch charging cables, showing the USB-A connector and the magnetic charging head.
2. Setup
Follow these steps to properly set up your Xininyia H80 Smart Watch Charger:
- Connect to Power Source: Insert the USB-A end of the charging cable into a compatible USB power source. This can be a computer, laptop, power bank, or a wall charger with a USB port.
- Connect to Smartwatch: Align the magnetic charging head with the charging contacts on the back of your Mindrose H80 smartwatch. The strong magnetic design will ensure a secure connection.
- Verify Connection: Ensure the smartwatch displays a charging indicator. If the magnets repel or the watch does not show a charging status, adjust the orientation of the magnetic head. The charging pins must align correctly with the smartwatch's contacts.
Image 2.1: The USB-A connector can be plugged into a computer, laptop, power bank, or wall charger.
Image 2.2: Visual guide for connecting the magnetic charger to the smartwatch. It illustrates that if magnets repel, the watch will not charge. Users should change directions to align the charging pins and ensure the magnet is attached.
3. Operating Instructions
The Xininyia H80 Smart Watch Charger is designed for efficient and safe charging:
- Fast Charging: The advanced fast charging technology and optimized circuit design ensure stable current and voltage output for quick charging.
- Magnetic Connection: The built-in pure copper probe with solid magnetic power provides a stronger and more reliable connection to your smartwatch compared to standard chargers.
- Charging Time: A full charge typically takes approximately 2 to 3 hours.
- Safety Features: The charger incorporates multiple protection mechanisms, including short-circuit protection, over-voltage protection, and over-current protection. These features prevent overheating and potential damage to your smartwatch battery. The product is ROHS/CE certified.
Image 3.1: This image highlights the built-in short-circuit protection IC, ensuring safe and reliable charging for 2-3 hours without risk of damage from excessive current.
4. Maintenance
To ensure the longevity and optimal performance of your charging cable, follow these maintenance guidelines:
- Storage: The cable is flexible and easy to roll and store. When not in use, coil the cable neatly to prevent tangling and damage.
- Cleaning: Keep the magnetic charging contacts clean and free from dust or debris. Use a soft, dry cloth to gently wipe the contacts if necessary.
- Durability: The cable is constructed from durable ABS material and flexible PVC, designed to withstand over 5000 bends. Avoid excessive force or sharp bends to maintain its integrity.
- Environmental Care: The charger adopts a high-efficiency conversion circuit and low-power standby mode to reduce energy consumption, minimizing energy waste.
Image 4.1: The cable features a compact and lightweight design, along with a reinforced bend design for enhanced durability and ease of use.
5. Troubleshooting
If you encounter issues while charging, refer to the following troubleshooting tips:
- Watch Not Charging (Magnets Repel): If the charging magnets repel each other, the watch will not charge. This indicates incorrect polarity. Simply change the direction of the magnetic charging head, align the charging pins, and ensure the magnet is securely attached to the watch.
- Watch Not Charging (Magnet Attached): If the magnet attaches but the watch still doesn't charge, it may be that the poles (+/-) of the charging pin do not match your specific smartwatch model. While this charger is compatible with Mindrose H80, some variations may exist. Please contact customer support for assistance.
- Slow Charging: Ensure your USB power source provides sufficient power. Try connecting to a different USB port or a dedicated wall adapter.
- Intermittent Charging: Check for any debris on the charging contacts of both the cable and the smartwatch. Ensure the connection is firm and stable.
6. Specifications
- Product Name: Xininyia H80 Smart Watch Charger
- Model: H80
- Cable Length: 60 cm (approximately 23.6 inches)
- Package Contents: 2x Magnetic Charging Cables
- Connector Type: USB Type A
- Cable Type: USB
- Compatible Devices: Mindrose H80 1.47" Fitness Tracker Smartwatch
- Material: ABS (Acrylonitrile Butadiene Styrene) and flexible PVC (Polyvinyl Chloride)
- Special Features: Strong magnetic design, short-circuit protection, over-voltage protection, over-current protection, shock-resistant, efficient fast charging, durable (5000+ bend test).
- Certifications: ROHS/CE certified
- Package Dimensions: 4.13 x 2.99 x 0.47 inches
- Package Weight: 0.81 ounces
Image 6.1: Detailed display showing the pure copper probe for sensitive contact and fast charging, N52 magnet for strong and durable connection, ABS+PC material for safety and durability, flexible PVC cable, USB interface with multiple functional protections, and pure copper wire core for stable and safe charging.
7. Warranty and Support
For any questions, concerns, or technical support regarding your Xininyia H80 Smart Watch Charger, please refer to your purchase documentation or contact the seller directly. While specific warranty details are not provided in this manual, most products come with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for any warranty claims.