Generic 8.0Ah 20V Max Battery and DCB112 Charger Kit Instruction Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your Generic 8.0Ah 20V Max Lithium-Ion Battery and DCB112 Compatible Charger Kit. This kit is designed to provide reliable power for your compatible 20V Max power tools. Please read this manual thoroughly before initial use and retain it for future reference.

Generic 8.0Ah 20V Max Battery and DCB112 Charger Kit

Image 1.1: The 8.0Ah 20V Max Lithium-Ion Battery and DCB112 Compatible Charger Kit.

2. Safety Information

Always observe the following safety precautions to reduce the risk of injury, fire, or electric shock when using batteries and chargers.

2.1 General Battery Safety

Do not immerse the battery in water or other liquids.
Do not store or use the battery in extreme temperatures (above 104°F / 40°C or below 32°F / 0°C).
Avoid short-circuiting the battery terminals.
Do not attempt to open, disassemble, or modify the battery pack.
Keep batteries away from children and pets.
If the battery is damaged, do not use it. Contact customer support.

2.2 Charger Safety

Use only the provided DCB112 compatible charger to charge these batteries. Using other chargers may cause damage or fire.
Do not charge damaged batteries.
Ensure the charger is placed on a stable, non-flammable surface during charging.
Unplug the charger from the power outlet when not in use or before cleaning.

2.3 Disposal

Lithium-Ion batteries must be recycled or disposed of properly. Do not dispose of batteries in household waste or by incineration. Contact your local waste management authority for information on recycling options.

Battery safety features including over-current, over-heating, short-circuit, over-discharge, over-charge, and no memory protection.

Image 2.1: The battery features multiple built-in protections for safe operation.

3. Package Contents

Verify that all items are present in your package:

2 x 8.0Ah 20V Max Lithium-Ion Batteries (DCB200 Compatible)
1 x 12V/20V DCB112 Compatible Battery Charger

Contents of the battery and charger kit, showing two batteries and one charger.

Image 3.1: The complete kit including two batteries and one charger.

4. Specifications

4.1 Battery Specifications

Capacity: 8000mAh (8.0Ah)
Voltage: 20V MAX
Type: Lithium Ion
Compatibility: DEWALT 20V Max tools and chargers (DCB200, DCB201, DCB203, DCB204, DCB206, DCB207, etc.)
Features: Integrated LED charge indicator, multiple protection circuits (over-charge, over-discharge, over-current, over-heat, short-circuit), no memory effect.

4.2 Charger Specifications

Model: DCB112 Compatible
Input Voltage: 170 Volts
Output Voltage: 12V / 20V (DC)
Compatibility: Charges 12V, 20V, and 60V DEWALT Lithium-Ion batteries (e.g., DCB120, DCB122, DCB124, DCB200, DCB201, DCB204, DCB207, DCB606, DCB609, DCB612, DCB615).

4.3 Physical Dimensions

Product Dimensions: 4.6 x 5.6 x 4.7 inches
Item Weight: 3.87 pounds (for the kit)

Detailed battery specifications including 8.0Ah capacity, 20V Max voltage, and Li-ion type.

Image 4.1: Key specifications of the 8.0Ah 20V Max Lithium-Ion battery.

Charger compatibility with various DEWALT 12V, 20V, and 60V batteries.

Image 4.2: The DCB112 compatible charger supports a wide range of DEWALT batteries.

5. Setup and Charging

5.1 Initial Charging

Before first use, fully charge the battery pack. New batteries are not fully charged and require charging before operation.

5.2 Charging Procedure

Plug the charger into a standard 170V AC electrical outlet.
Slide the battery pack onto the charger until it clicks into place.
Observe the charger's LED indicator. A solid red light typically indicates charging in progress. A solid green light indicates a full charge. Refer to the charger's specific indicator guide for detailed status meanings.
Once fully charged, remove the battery from the charger.
Unplug the charger from the outlet when not in use.

5.3 Battery LED Indicator

The battery pack features an integrated LED light indicator to show the remaining charge level. Press the button on the battery to activate the indicator lights.

The DCB112 compatible charger and various compatible battery models.

Image 5.1: The DCB112 compatible charger is designed for various DEWALT 12V/20V/60V batteries.

6. Operating the Battery

6.1 Inserting the Battery into a Tool

Align the battery pack with the battery port on your compatible 20V Max power tool.
Slide the battery into the tool until it clicks securely into place. Ensure it is fully seated to prevent accidental dislodgement during operation.

6.2 Removing the Battery from a Tool

Locate the battery release button on the tool.
Press and hold the release button.
Slide the battery pack out of the tool.

6.3 Compatibility

These 8.0Ah 20V Max batteries are designed to be compatible with a wide range of DEWALT 20V Max power tools, providing extended runtime for demanding tasks.

Various DEWALT 20V tools shown with the compatible battery, including a circular saw, impact driver, and nail gun.

Image 6.1: The battery is compatible with a variety of DEWALT 20V tools.

7. Maintenance and Storage

7.1 Cleaning

Keep the battery and charger clean and free of debris. Use a dry cloth to wipe surfaces. Do not use solvents or harsh chemicals.

7.2 Storage

Store batteries in a cool, dry place, away from direct sunlight and moisture.
For long-term storage, charge the battery to approximately 50-70% capacity. Do not store fully discharged or fully charged for extended periods.
Avoid storing batteries in temperatures below 32°F (0°C) or above 104°F (40°C).

7.3 Battery Life Optimization

These Lithium-Ion batteries have no memory effect, meaning they can be charged or discharged as needed without loss of capacity.
Avoid completely draining the battery before recharging.
Regularly use and recharge batteries to maintain optimal performance.

8. Troubleshooting

If you encounter issues with your battery or charger, refer to the following common troubleshooting steps:

Problem	Possible Cause	Solution
Battery not charging	Charger not plugged in Faulty outlet Battery not seated correctly Damaged battery or charger Extreme temperature	Ensure charger is securely plugged into a working outlet. Re-seat the battery firmly on the charger. Allow battery/charger to reach room temperature (40°F-100°F / 4°C-38°C). Inspect battery and charger for damage. If damaged, discontinue use.
Tool not powering on with charged battery	Battery not fully charged Battery not seated correctly in tool Tool malfunction	Verify battery charge level using the LED indicator. Ensure battery is fully inserted and clicked into place in the tool. Test the tool with another known-good battery if available.
Charger LED indicates error	Battery too hot/cold Faulty battery	Remove battery and allow it to cool down or warm up to room temperature. Try charging a different battery. If the issue persists with multiple batteries, the charger may be faulty.

If these steps do not resolve the issue, please contact customer support for further assistance.

9. Warranty and Support

We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us directly. Our primary goal is customer satisfaction, and we are committed to resolving any issues you may encounter.

For support, please refer to the contact information provided with your purchase or on the product packaging. When contacting support, please have your product model number (DCB200 compatible battery, DCB112 compatible charger) and purchase details readily available.

DCB200, DCB112