1. Introduction
Thank you for choosing the SX17487 Men's Automatic 6-in-1 Male Masturbator. This device is designed to provide a comprehensive experience with multiple functions integrated into a single unit. It features advanced modes and an intuitive LCD display for ease of use. Please read this manual thoroughly before operating the device to ensure proper function, safety, and longevity.
2. Product Components
The SX17487 device consists of the main unit, an internal sleeve, and a USB-C charging cable. Familiarize yourself with the device's external features and internal textures.
Figure 2.1: Overview of the SX17487 device, showing the main body, control panel with LCD display, and the transparent casing revealing the internal mechanism. The image highlights the device's sleek design and functional layout.
- Main Unit: Houses the motor, battery, control panel, and LCD display.
- Internal Sleeve: The removable, textured insert designed for user interaction.
- USB-C Port: Located on the device for charging.
- Control Buttons: For power, mode selection, and intensity adjustment.
- LCD Display: Shows current mode, intensity level, and battery status.
3. Charging Instructions
Before first use, fully charge the device. Ensure the device is dry before charging.
- Locate the USB-C charging port on the device.
- Connect the provided USB-C cable to the device and the other end to a compatible USB power adapter (not included) or a computer USB port.
- The LCD display will indicate charging status. A full charge typically takes approximately 3.5 hours.
- Once fully charged, the device provides approximately 1 hour of operational time.
- Disconnect the charging cable after charging is complete.
Note: Do not operate the device while it is charging.
4. Setup and Preparation
Follow these steps for initial setup and preparation before each use:
- Clean the Internal Sleeve: Before first use and after each subsequent use, thoroughly clean the internal sleeve with mild soap and warm water. Rinse thoroughly and allow to air dry completely.
- Lubrication: Apply a generous amount of water-based lubricant to the entrance of the internal sleeve and to the area of the body that will interact with the device. Do not use oil-based lubricants as they can damage the material.
- Power On: Press and hold the power button on the control panel for a few seconds until the LCD display illuminates.
5. Operating Instructions
The SX17487 offers six distinct functions with multiple modes. Use the control buttons and LCD display to navigate and select your desired settings.
5.1 Control Panel Overview
- Power Button: Press and hold to turn on/off. Short press to cycle through main functions.
- Mode Button(s): Used to select specific modes within a function (e.g., different thrusting patterns).
- Intensity Buttons (+/-): Adjust the speed or strength of the selected mode.
- LCD Display: Provides real-time feedback on the active function, mode, intensity, and battery level.
5.2 Available Functions and Modes
The device integrates the following functions, each with 7 distinct modes:
- Thrusting: 7 different patterns of in-and-out motion.
- Rotating: 7 different patterns of internal rotation.
- Suction: 7 different patterns of air pressure variation.
- Vibrating: 7 different patterns of vibration.
Additionally, the device features a 12-second vacuum penis pump function, which can be activated separately or in combination with other modes.
5.3 Step-by-Step Operation
- Power On: Press and hold the power button until the LCD display activates.
- Select Function: Short press the power button to cycle through the main functions (Thrusting, Rotating, Suction, Vibrating). The active function will be displayed on the LCD.
- Select Mode: Once a function is selected, use the dedicated mode button(s) (if available, or short press the power button again if it cycles modes) to choose one of the 7 patterns. The LCD will update to show the selected mode.
- Adjust Intensity: Use the '+' and '-' buttons to increase or decrease the intensity (speed/strength) of the selected mode.
- Activate Vacuum Pump: If desired, activate the 12-second vacuum pump function via its dedicated button or by cycling through functions until it appears on the LCD.
- Combine Modes: The device allows for combination of functions. Refer to the LCD display for active combinations.
- Power Off: When finished, press and hold the power button until the device powers down and the LCD display turns off.
Figure 5.1: Detailed view of the internal mechanism, illustrating the dynamic elements responsible for thrusting and rotating motions. Arrows indicate the direction of movement within the sleeve.
Figure 5.2: The device's transparent casing showcasing the suction capabilities, with blue arrows indicating air flow and pressure changes that create the vacuum effect.
Figure 5.3: A close-up image displaying the various intricate textures and patterns within the internal sleeve, designed to enhance sensation. Different sections of the sleeve are highlighted.
6. Waterproof Features and Water Injection
The SX17487 is fully waterproof, allowing for use in wet environments such as during bathing. It also supports water injection for specific training purposes.
- Waterproof Use: The device can be safely submerged in water. Ensure all ports are securely sealed before immersion.
- Warm Water Injection: For endurance enhancement, warm water (within 38℃ / 100.4°F) can be carefully injected into the internal sleeve.
- Cold Water Injection: Similarly, cold water can be used for alternating temperature training.
- Caution: Always ensure the water temperature is safe and comfortable. Do not use water hotter than 38℃ (100.4°F) as it may cause discomfort or damage to the device.
7. Maintenance and Cleaning
Proper maintenance ensures hygiene and extends the lifespan of your device.
- Disassembly: Carefully separate the internal sleeve from the main unit.
- Cleaning the Sleeve: Wash the internal sleeve thoroughly with mild antibacterial soap and warm water. Rinse completely to remove all soap residue.
- Drying the Sleeve: Allow the internal sleeve to air dry completely before reassembling or storing. Ensure no moisture remains to prevent bacterial growth.
- Cleaning the Main Unit: Wipe the exterior of the main unit with a damp cloth and mild soap. Do not submerge the main unit unless specifically for waterproof use, and ensure the charging port cover is securely closed.
- Storage: Store the device in a clean, dry, and dust-free environment, away from direct sunlight and extreme temperatures.
- Avoid: Do not use harsh chemicals, alcohol-based cleaners, or abrasive materials, as these can damage the device's materials.
8. Troubleshooting
If you encounter any issues with your SX17487 device, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Low battery or no charge. | Charge the device fully for 3.5 hours. Ensure the charging cable is securely connected. |
| Functions are weak or inconsistent. | Low battery. Internal sleeve not properly seated. | Recharge the device. Ensure the internal sleeve is correctly inserted and secured. |
| LCD display is not working. | Device is off or battery is critically low. | Turn on the device. Charge the device if the battery is low. |
| Device makes unusual noises. | Internal sleeve misalignment or foreign object. | Disassemble, clean, and reassemble the internal sleeve. Inspect for any obstructions. If the issue persists, discontinue use and contact support. |
If the problem persists after attempting these solutions, please contact customer support for further assistance.
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | SX17487 |
| Functions | 6-in-1 (Thrusting, Rotating, Suction, Vibrating, Vacuum Pump, Water Injection) |
| Modes per Function | 7 (Thrusting, Rotating, Suction, Vibrating) |
| Vacuum Pump Duration | 12 seconds |
| Charging Type | USB-C Quick Charging |
| Charging Time | Approx. 3.5 hours |
| Operating Time | Approx. 1 hour (on full charge) |
| Waterproof Rating | Fully Waterproof |
| Max Water Temperature for Injection | 38℃ (100.4°F) |
| Display | LCD |
| Manufacturer | Matiska |
10. Safety Information
- This product is intended for adult use only.
- Consult a healthcare professional before use if you have any medical conditions or concerns.
- Discontinue use immediately if you experience any discomfort, pain, or irritation.
- Do not use the device if it appears damaged or malfunctioning.
- Keep out of reach of children.
- Use only water-based lubricants. Oil-based lubricants can degrade the material.
- Do not expose the device to extreme temperatures or direct sunlight for prolonged periods.
- Ensure the charging port is completely dry before connecting the charging cable.
11. Warranty and Support
This product comes with a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty details, please refer to the product packaging or contact the retailer where the product was purchased.
For technical support, troubleshooting assistance, or warranty claims, please contact our customer service department. Contact information can typically be found on the product packaging or the retailer's website.
When contacting support, please have your model number (SX17487) and purchase information readily available.