1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Weibath 2 Person Jetted Whirlpool Bathtub. Please read this manual thoroughly before installation and use, and retain it for future reference. This bathtub is designed to provide a relaxing hydro-massage experience with features such as thermostat control, ozone cleaning, and water level sensing.
Image 1.1: Overview of the Weibath 2 Person Jetted Whirlpool Bathtub.
2. Safety Information
Important Safety Instructions:
- Electrical Safety: All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes. Ensure the bathtub is connected to a dedicated, grounded circuit protected by a Ground Fault Circuit Interrupter (GFCI).
- Water Temperature: Do not exceed 104°F (40°C) water temperature. Prolonged immersion in hotter water can cause hyperthermia.
- Children: Supervise children closely when they are in or near the bathtub.
- Health Conditions: Consult a physician before use if you have heart disease, high blood pressure, diabetes, or are pregnant.
- Chemicals: Use only recommended cleaning agents. Avoid abrasive cleaners or solvents that can damage the acrylic surface.
- Installation: Ensure the floor can support the weight of the bathtub filled with water and occupants.
- Ventilation: Ensure adequate ventilation in the bathroom to prevent moisture buildup.
3. Product Components
Your Weibath Jetted Whirlpool Bathtub includes the following key components:
- Acrylic Bathtub Shell
- Hydro Massage Jets
- Thermostat Control System
- Ozone Cleaning System
- Water Level Sensor
- Faucet and Handheld Shower
- Drain Assembly
- Headrests (if included with your model)
Image 3.1: Bathtub with visible controls and headrests.
4. Setup and Installation
Installation should be performed by a qualified professional. Ensure all local plumbing and electrical codes are met.
4.1 Site Preparation
- Verify the installation area dimensions match the bathtub's specifications (70.8"L x 47.2"W x 24.4"H).
- Ensure the subfloor is level and capable of supporting the bathtub's weight (approximately 320 lbs dry, plus water and occupants).
- Provide access for plumbing and electrical connections.
Image 4.1: Detailed product dimensions for installation planning.
4.2 Plumbing Connections
- Connect hot and cold water supply lines to the bathtub's faucet inlets.
- Connect the drain assembly to your household drainage system. Ensure all connections are watertight.
4.3 Electrical Connections
- Connect the bathtub's power supply to a dedicated, GFCI-protected electrical circuit as per local codes.
- Ensure proper grounding.
5. Operating Instructions
5.1 Filling the Bathtub
- Close the drain.
- Turn on the faucet to fill the tub with water.
- The Water Level Sensor will automatically stop filling once the optimal water level is reached, preventing overflow and ensuring proper jet operation.
Image 5.1: Water Level Sensing mechanism.
5.2 Control Panel Functions
The control panel allows you to manage various functions of your jetted tub.
Image 5.2: Control panel for operating the bathtub's features.
- Power Button: Turns the system on/off.
- Thermostat Control: Use the SET button and arrow keys to adjust and maintain your desired water temperature. The built-in thermostat will keep the water at a consistent warmth.
- Hydro Massage Jets: Activates the water jets for a soothing massage.
- Hydro Surf Bubbles: Engages the gentle bubble feature for full-body relaxation.
- Waterfall Feature: Activates the waterfall for a natural stream effect.
- Ozone Cleaning: Initiates the automatic pipe sanitation cycle (see Maintenance section).
- Lighting: Controls the integrated LED lighting (if applicable).
Image 5.3: Visual representation of bubble, surf, and waterfall functions.
6. Maintenance and Cleaning
6.1 General Cleaning
- Clean the acrylic surface regularly with a soft cloth and a non-abrasive, mild bathroom cleaner.
- Avoid harsh chemicals, abrasive pads, or solvents, as these can damage the finish.
- Rinse thoroughly after cleaning.
Image 6.1: Cleaning the durable acrylic surface.
6.2 Ozone Self-Cleaning System
- The integrated ozone cleaning system automatically sanitizes the internal piping after each use.
- To manually activate, press the Ozone Cleaning button on the control panel.
- This system helps prevent bacteria and biofilm buildup in the jet system.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jets not operating | Insufficient water level; Power supply issue; Jet blockage. | Ensure water level is above jets; Check GFCI and power connection; Inspect jets for obstructions. |
| Water not heating | Thermostat not set correctly; Heater malfunction; Power supply issue. | Verify thermostat setting; Check power; Contact service if issue persists. |
| Water level sensor not working | Sensor obstruction; Malfunction. | Clean sensor area; Contact service. |
| Unusual noise from pump | Air in pump; Debris in pump; Pump malfunction. | Run jets to clear air; Check for debris; Contact service. |
For issues not listed or if solutions do not resolve the problem, please contact Weibath customer support.
8. Specifications
| Brand | Weibath |
| Model Number | 86920685 |
| Product Dimensions (L x W x H) | 70.8" x 47.2" x 24.4" |
| Material | Acrylic |
| Color | White |
| Item Weight | 320 Pounds |
| Installation Type | Alcove |
| Included Components | Jets, Drain Assembly, Faucet |
Image 8.1: Multi-layered acrylic construction for durability and heat retention.
9. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact Weibath directly through their official website or customer service channels. Keep your proof of purchase for warranty claims.
Weibath Customer Service: Visit the Weibath Store on Amazon
