Instruction Manual

Product Overview

This manual provides essential information for the proper installation, operation, and maintenance of your Brehilden 1502-11-01 oil filter. Designed for use with DA-7.5, DA-11, DA-15, and DA-18 systems, this filter is crucial for maintaining engine health by removing contaminants from the engine oil.

Safety Information

• Always ensure the engine is cool and turned off before attempting any installation or maintenance.
• Wear appropriate personal protective equipment, including gloves and eye protection, when handling engine oil.
• Dispose of used oil and filters responsibly according to local environmental regulations.
• Refer to your vehicle or equipment's service manual for specific oil capacities and types.

Installation Guide

Follow these steps carefully to ensure correct installation of the Brehilden 1502-11-01 oil filter:

1. Prepare the new filter: Lightly oil the rubber gasket on the new filter with clean engine oil. This helps create a proper seal and prevents the gasket from tearing during installation.
2. Install the filter: Carefully screw the new oil filter onto the engine's filter housing. Hand-tighten the filter firmly until the gasket makes contact with the mounting surface, then tighten an additional 3/4 to 1 full turn by hand. Do not overtighten with tools, as this can damage the filter or housing.
3. Refill engine oil: After installing the new filter, refill the engine with the recommended amount and type of engine oil.
4. Check for leaks: Start the engine and let it run for a few minutes. Carefully inspect around the oil filter for any signs of oil leaks. If leaks are detected, turn off the engine, allow it to cool, and then gently tighten the filter further by hand if necessary. Recheck for leaks.

Image 1: Front view of the Brehilden 1502-11-01 oil filter, showing the blue canister, the top gasket, and the threaded opening. The German installation instructions are visible on the label.

Image 2: Angled perspective of the Brehilden 1502-11-01 oil filter, highlighting its cylindrical shape and the top sealing surface.

Operation

Once properly installed, the Brehilden 1502-11-01 oil filter operates passively as part of your engine's lubrication system. It continuously filters contaminants from the engine oil as the engine runs. Regular monitoring of your engine's oil level and condition is recommended as part of routine vehicle or equipment maintenance.

Maintenance

The oil filter is a critical component that requires periodic replacement. Adhere to the oil change intervals recommended by your vehicle or equipment manufacturer. Typically, oil filters should be replaced every time the engine oil is changed, or as specified in your owner's manual. Using a fresh, high-quality filter like the Brehilden 1502-11-01 ensures optimal engine protection.

Troubleshooting

Specifications

Warranty and Support

For information regarding warranty coverage or technical support for your Brehilden 1502-11-01 oil filter, please refer to the documentation provided at the time of purchase or contact the seller directly. Specific warranty terms and support channels are typically managed by the point of sale or the manufacturer.