Ankway 10W Solar Automatic Drip Irrigation Kit

Product Overview

The Ankway 10W Solar Automatic Drip Irrigation Kit is an innovative, solar-powered watering system designed to provide efficient and automated irrigation for a variety of plants. Ideal for gardens, raised beds, patios, lawns, greenhouses, and potted plants, this system helps conserve water and simplifies plant care, especially during vacations or busy schedules. It features a built-in battery for continuous operation and intelligent sensors to prevent issues like pump inactivity or water shortage.

Figure 1: Complete Ankway Solar Drip Irrigation Kit components and typical setup.

Components and Package Contents

Before beginning installation, please verify that all components listed below are present in your package:

• 1 x Solar Panel with Bracket
• 1 x Controller (Main Unit)
• 1 x 164ft Distribution Tubing
• 3 x 16.4ft Irrigation Hoses (with 2 circlips each)
• 50 x Drippers
• 50 x Dripper Tees
• 1 x Water Level Sensor (16.4ft) with Water Pump Filter
• 2 x Hexagonal Expansion Screws
• 1 x Anti-siphon Device
• 4 x Expansion Tube & Self-tapping Screws
• 1 x Hose Connector (with 6 straight barbs)

Figure 2: Detailed view of the controller and all included accessories.

Setup and Installation

Follow these steps to set up your Ankway Solar Automatic Drip Irrigation Kit:

1. Plan Your Layout: Before cutting any tubing, plan the layout of your irrigation system. Determine how many drippers each plant pot or garden bed will require. Larger pots or high-humidity plants may need two or three drippers.
2. Mount the Controller: Securely mount the main controller unit in a suitable location, ideally near your water source (e.g., a rain barrel or water container). Ensure it is accessible for adjustments and protected from direct harsh weather if possible, though it is designed for outdoor use.
3. Connect Water Source: Connect the thick tubing (inlet hose) from your water source to the 'IN' port on the controller. The water level sensor with pump filter should be submerged in your water container.
4. Connect Distribution Tubing: Connect the main distribution tubing to the 'OUT' port on the controller. This tubing will carry water to your plants.
5. Cut and Connect Smaller Tubing: Measure and cut the smaller tubing (irrigation hoses) to the desired lengths for each plant. To make connections easier, immerse the end of the hose in hot water for about a minute before inserting the T-connections and drippers.
6. Install Drippers: Attach the drippers to the ends of the smaller tubing. Insert the blue stakes (drippers) all the way into the soil next to your plants, ensuring the water will drip directly into the root zone. Do not leave them sticking out; push them as deep as possible.
7. Connect Solar Panel: Connect the solar panel to the designated port on the controller. Position the solar panel in an area that receives maximum direct sunlight throughout the day to ensure optimal charging of the internal battery.

Figure 3: Visual guide for connecting the tubing and drippers.

Operating Instructions

The Ankway system offers adjustable watering modes to suit various plant needs:

• Timer Modes: The system features 12 adjustable timer modes.
• Watering Duration: Select watering durations of 5, 15, or 20 minutes.
• Watering Frequency: Choose watering frequencies of 12 or 24 hours.
• Once set, the system will automatically water your plants according to the programmed schedule.
• The 2200mAh battery provides 6-35 days of operation on a full charge, ensuring continuous watering even without direct sunlight.

Figure 4: Controller interface for setting watering time and interval.

Figure 5: Solar panel charging the internal battery of the controller.

Maintenance

To ensure the longevity and optimal performance of your irrigation system, regular maintenance is recommended:

• Filter Cleaning: The water pump filter can become clogged over time. If the system alarms due to pump inactivity or insufficient water, check and clean the filter.
• Tubing Inspection: Periodically inspect all tubing for kinks, blockages, or damage. Ensure drippers are not clogged with soil or debris.
• Solar Panel Cleaning: Keep the solar panel clean from dust and debris to ensure efficient charging.
• Water Source Monitoring: Regularly check your water container to ensure there is sufficient water for scheduled watering cycles.

Troubleshooting

If you encounter issues with your Ankway Drip Irrigation Kit, refer to the following common problems and solutions:

For any persistent problems or further assistance, please contact Ankway customer support.

Specifications

• Brand: Ankway
• Model: B0F4QD8ZMW
• Material: Plastic
• Battery: 1 Lithium Ion battery (included) - 2200mAh
• Watering Capacity: Up to 50 plants/drippers
• Watering Duration Options: 5 / 15 / 20 minutes
• Watering Frequency Options: 12 / 24 hours
• Protection Class: IP67 (Waterproof and Sunproof)
• Power Source: Solar energy
• Package Dimensions: 14.96 x 10.31 x 4.33 inches
• Item Weight: 5.4 Pounds
• UPC: 755507467817

Warranty and Support

Ankway is committed to providing high-quality products and customer satisfaction. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims. For technical support, troubleshooting assistance, or inquiries regarding your Ankway Solar Automatic Drip Irrigation Kit, please contact Ankway customer service through the retailer where you purchased the product or visit the official Ankway website for contact information.

Contact Information: Refer to your product packaging or the Ankway official website for the most current support contact details.