Product Overview
The Xbuyee 2FT 150W LED High Bay Shop Light is engineered to deliver powerful and efficient illumination for large indoor spaces. This fixture provides 19,500 lumens of bright 5000K daylight, making it an ideal lighting solution for various commercial and industrial environments.
Image: Xbuyee 2FT 150W LED Linear High Bay Light highlighting its features.
Key Features:
- High Efficiency: This 150W LED high bay light produces 19,500 lumens of brightness at 5000K daylight, designed to replace 600W equivalent traditional fixtures, significantly saving electricity costs.
- 0-10V Dimmable and Anti-glare: The fixture supports 0-10V dimming, allowing precise control over light output intensity (dimmer switch not included). Its frosted polycarbonate lens ensures anti-glare and non-dazzling illumination.
- Excellent Heat Dissipation: Constructed with a sturdy metal housing and robust polycarbonate lens, the design incorporates multiple air vents for superior heat dissipation, contributing to a long lifespan of 50,000 hours.
- Easy Chain Mount: Installation is simplified with included strong suspending chains and V-shaped hooks, enabling fast and straightforward hook mounting. The light is compatible with a wide voltage range from 120V to 277V.
Setup and Installation
This section provides step-by-step instructions for safely installing your Xbuyee LED High Bay Light. Always ensure power is disconnected at the circuit breaker before beginning any electrical installation.
Package Contents:
- Xbuyee 2FT 150W LED High Bay Light(s)
- Mounting Hardware (Suspending Chains, V-shaped Hooks)
Installation Steps:
- Step 1: Insert Hooks. Insert the V-shaped hooks into the designated slotted holes on the fixture's housing.
Image: Inserting the V-shaped hook into the fixture.
- Step 2: Attach Chains. Hook the suspending chains to the V-shaped hooks. Secure the other end of the chains to appropriate ceiling anchors or structural supports. Ensure the anchors can safely support the weight of the fixture.
Image: Attaching the chains and suspending the fixture.
- Step 3: Make Wiring Connections. Connect the fixture's electrical wires to your building's power supply wiring. Follow local electrical codes and use appropriate wire connectors. For 0-10V dimming functionality, connect the dedicated dimming wires to a compatible 0-10V dimmer switch (not included). If not using dimming, cap off the dimming wires according to safety standards.
Image: Making electrical and dimmer wiring connections.
- Step 4: Secure Wiring. Carefully insert the connected wire terminals into the wire entry point on the fixture, ensuring all connections are neat and secure.
Image: Securing the wiring into the fixture.
Installation Video:
Official video demonstrating the installation process for Xbuyee 2FT and 4FT LED Linear High Bay lights. This video provides a visual guide to complement the written instructions.
Operating Instructions
The Xbuyee LED High Bay Light is designed for straightforward operation once properly installed.
Power On/Off:
After successful installation and wiring, the light can be turned on or off using the connected wall switch or by activating/deactivating the corresponding circuit breaker.
Dimming Functionality (0-10V):
This fixture supports 0-10V dimming. To utilize this feature, a compatible 0-10V dimmer switch (not included) must be installed and correctly wired to the fixture's dimming wires. Adjust the dimmer switch to achieve the desired light intensity, ranging from 0% to 100% brightness.
Image: Illustration of 0-10V dimming capability.
Maintenance
The Xbuyee LED High Bay Light is designed for minimal maintenance, ensuring long-term performance with simple care.
- Cleaning: Before cleaning, ensure the power supply to the fixture is turned off. Gently wipe the exterior of the fixture and the lens with a soft, dry, or slightly damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or optical components.
- Inspection: Periodically inspect the fixture for any signs of physical damage, loose mounting hardware, or frayed wiring. If any issues are observed, consult a qualified electrician for repair or replacement.
- Heat Dissipation: To maintain optimal heat dissipation and prolong the product's lifespan, ensure that the air vents on the fixture are not obstructed by dust, debris, or other materials. Proper airflow is crucial for cooling the LED components.
Image: Diagram highlighting the heat dissipation features.
Troubleshooting
If you encounter any issues with your Xbuyee LED High Bay Light, refer to the following common problems and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply to the fixture. Loose or incorrect wiring connections. | Check the circuit breaker and ensure the wall switch is in the 'ON' position. Verify all electrical wiring connections are secure and correctly installed. |
| Light flickers or dims unexpectedly. | Loose wiring connection. Incompatible dimmer switch (if applicable). Voltage fluctuation in the electrical system. | Verify all wiring connections are tight and secure. Ensure that any installed dimmer switch is a 0-10V compatible model. If issues persist, consult a qualified electrician to check for voltage irregularities. |
| Light output is lower than expected. | Dimmer setting is too low. Accumulation of dust or dirt on the lens. | If a dimmer is installed, adjust it to 100% brightness. Turn off power and gently clean the fixture's lens with a soft, dry cloth to remove any obstructions. |
Product Specifications
Detailed technical specifications for the Xbuyee 2FT 150W LED High Bay Shop Light:
| Brand | Xbuyee |
| Model Number | Xbuyee-SLB2F |
| Size | 2FT |
| Wattage | 150W |
| Brightness | 19500 Lumens |
| Color Temperature | 5000K Daylight |
| Voltage | 120-277V |
| Dimmable | 0-10V Dimmable |
| Lifespan | 50,000 hours |
| Material | High quality Acrylic, Sturdy Iron |
| Mounting Type | Chain Mount (Hook Mount) |
| Certifications | ETL |
| Indoor/Outdoor Usage | Indoor |
| Water Resistance Level | Not Water Resistant |
Warranty Information
Xbuyee commercial grade high bay LED shop lights are backed by a 5-year warranty. This warranty covers defects in materials and workmanship under normal use and service conditions. Please retain your proof of purchase for any warranty claims. For detailed terms and conditions, please refer to the product packaging or contact customer support.
Customer Support
For any questions, concerns, or technical assistance regarding your Xbuyee LED High Bay Light, our customer support team is available to help.
Contact Method: The most efficient way to reach Xbuyee customer support is via the Amazon messaging system. Please include your order number and a detailed description of your inquiry.
Online Resources: Visit the official Xbuyee store on Amazon for additional product information, FAQs, and other support resources. Xbuyee Amazon Store
