EMERBU Gel Splat Blaster Vector Lite Series Instruction Manual

Introduction

This manual provides essential information for the safe and effective operation, setup, and maintenance of your EMERBU Gel Splat Blaster Vector Lite Series. Please read all instructions carefully before use. This product is intended for users aged 15 and above.

What's in the Box

The EMERBU Gel Splat Blaster Vector Lite Series set includes:

• EMERBU Gel Splat Blaster VECTOR of EMERBU Lite Series (Graffiti)
• 7.4V Modular Rechargeable Battery
• USB Charging Cable
• Gel Balls (multiple packs)
• Safety Goggles
• Various Accessories (as pictured)

Image: The complete set of the EMERBU Gel Splat Blaster Vector Lite Series, including the blaster, battery, charger, gel balls, safety goggles, and various attachments, laid out on a surface.

Setup

1. Prepare Gel Balls

1. Place dry gel balls in a large container.
2. Add plenty of water, ensuring the gel balls are fully submerged with ample room to expand.
3. Allow gel balls to soak for 3-4 hours, or overnight, until they reach 7-8mm in size.
4. Drain excess water thoroughly before use.
5. Store unused gel balls in an airtight container to prevent dehydration. Do not store gel balls inside the blaster or magazines when not in use, as they may dehydrate and cause malfunctions.

2. Charge and Install Battery

1. Connect the 7.4V modular rechargeable battery to the provided USB charging cable.
2. Plug the USB cable into any compatible AC adapter (not included) to charge. Fully charge the battery before first use.
3. Locate the battery compartment on the blaster.
4. Connect the battery to the blaster's internal connector.
5. Carefully place the battery inside the compartment and secure the cover, ensuring any wires are not pinched.

3. Attach Accessories

The blaster comes with various rail-mount accessories. Attach them to the available Picatinny rails on the blaster as desired. Ensure they are securely fastened.

Image: The EMERBU Gel Splat Blaster with labels pointing to its red light, switch, flashlight, and foldable stock, demonstrating accessory placement.

4. Load Magazine

Fill the drum magazine with prepared gel balls. The large capacity drum mag can hold up to 400 rounds.

Video: A detailed demonstration of setting up the EMERBU Vector Gel Ball Blaster, including battery installation, attaching accessories, and loading gel balls into the magazine.

Operating Instructions

1. Dual Firing Modes

The Vector blaster features two firing modes: electric fully automatic and manual semi-automatic. You can switch between modes for varied play.

• Electric Fully Automatic Mode: Engage the electric mode for continuous firing by pulling the trigger.
• Manual Semi-Automatic Mode: If the battery is depleted or for single shots, pull the bolt back for each shot. This allows continued use even without power.

Image: Close-up of the EMERBU Gel Splat Blaster highlighting the bolt for semi-automatic firing and the switch for full-automatic mode.

2. Firing Performance

The blaster is designed for high performance with enhanced materials and an improved gearbox, offering stable and powerful operation.

• Can blast up to 10 gel balls per second.
• Effective range up to 60 feet.

Image: The EMERBU Gel Splat Blaster in action, showing gel balls hitting a target with text indicating a firing rate of 10 gel balls per second and a 60-foot range.

Video: A demonstration of the EMERBU Vector Style Kids Gel Ball Blaster in use, showcasing its firing capabilities and features.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your blaster.

• Always empty the magazine and blaster of gel balls after each use.
• Store gel balls in an airtight container, separate from the blaster.
• Keep the blaster clean and free from debris. Use a soft, dry cloth for cleaning.
• Store the battery in a cool, dry place when not in use.

Troubleshooting

If you encounter issues, refer to the following common solutions:

• Blaster not firing: Ensure the battery is fully charged and correctly installed. Check if gel balls are properly loaded and hydrated to the correct size (7-8mm).
• Gel balls jamming: This often occurs if gel balls are not fully hydrated or are over-hydrated and too large. Ensure proper soaking and draining. Never store gel balls in the blaster.
• Reduced performance: A low battery charge can affect performance. Recharge the battery. Ensure gel balls are of consistent size and quality.

If problems persist, please contact EMERBU customer support.

Specifications

Safety Information

For Ages 15 Years Old and up and Adults. Always wear safety goggles when operating the blaster. Do not aim at eyes or face. Use only approved gel balls.

Warranty and Support

EMERBU is committed to providing quality products. If you have any questions, concerns, or require support regarding your Gel Splat Blaster, please contact EMERBU customer service through the retailer where the product was purchased. We are willing to listen to the voices of every user and will do our best to serve you.