GLOBO 109585

GLOBO LED Pendant Light - Model 109585

Instruction Manual

1. Product Overview

This GLOBO LED pendant light, Model 109585, is a modern lighting fixture designed for indoor use. It features a sleek rectangular frame with integrated LED technology, providing a warm white light at 3000K. The fixture is constructed from metal and plastic, finished in silver, and is suitable for various contemporary interior designs.

Key features include a 24W LED light source, producing 1400 lumens of illumination. The design emphasizes a clean aesthetic with its narrow frame and rounded corners, making it a timeless addition to your space.

GLOBO LED Pendant Light front view

Figure 1: Front view of the GLOBO LED Pendant Light, Model 109585, showcasing its rectangular frame design.

GLOBO LED Pendant Light corner detail

Figure 2: Close-up detail of the light's corner, highlighting the integrated LED strip.

2. Setup and Installation

Important Safety Information: Installation of this lighting fixture requires working with electrical wiring. It is strongly recommended that installation be performed by a qualified electrician to ensure safety and compliance with local electrical codes. Always turn off the main power supply at the circuit breaker before beginning any electrical work.

2.1 Unpacking

  • Carefully remove all components from the packaging.
  • Inspect the fixture for any damage. Do not install if damaged.
  • Ensure all parts listed in the packing contents (not provided, assume standard parts) are present.

2.2 Mounting the Fixture

  1. Turn off power at the main circuit breaker.
  2. Attach the mounting bracket (part of the ceiling canopy) to the ceiling junction box using appropriate screws. Ensure it is securely fastened.
  3. Adjust the suspension cables to the desired height. The maximum height is 120 cm.
  4. Connect the electrical wires from the fixture to the corresponding wires in the junction box (Live to Live, Neutral to Neutral, Ground to Ground) using wire connectors.
  5. Carefully tuck the wires into the junction box and secure the ceiling canopy to the mounting bracket.
  6. Restore power at the main circuit breaker.
GLOBO LED Pendant Light mounting plate and suspension wires

Figure 3: View of the ceiling mounting plate and adjustable suspension wires for the pendant light.

3. Operation

This GLOBO LED pendant light is designed for simple operation via a standard wall switch (not included). There is no integrated switch on the fixture itself.

  • Turning On/Off: Use your existing wall switch to control the light.
  • Dimming: This fixture is not dimmable. Attempting to use it with a dimmer switch may cause damage to the LED driver or the light itself.
  • Light Output: The integrated LED provides a consistent warm white light at 3000K with a brightness of 1400 lumens.

4. Maintenance

Regular maintenance will help preserve the appearance and functionality of your GLOBO LED pendant light.

  • Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as these can damage the finish or electrical components.
  • LED Replacement: The LED light source in this fixture is integrated and not designed to be user-replaceable. If the LED fails, the entire fixture may need to be replaced.
  • Inspection: Periodically check the suspension cables and mounting for any signs of wear or loosening.

5. Troubleshooting

If you encounter issues with your GLOBO LED pendant light, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn on.
  • No power to the fixture.
  • Loose wiring connection.
  • Faulty wall switch.
  • Check circuit breaker and wall switch.
  • Turn off power and check wiring connections. Consult an electrician if unsure.
  • Test the wall switch with another device or replace it.
Light flickers or dims unexpectedly.
  • Incompatible dimmer switch.
  • Loose wiring.
  • Power fluctuations.
  • Ensure no dimmer switch is used, as this fixture is not dimmable.
  • Turn off power and check wiring connections.
  • Consult an electrician to check household wiring.
Light is not bright enough.
  • Room size exceeds recommended coverage.
  • Dust or dirt on the light surface.
  • Verify the light output (1400 lm) is suitable for your room.
  • Clean the light fixture as per maintenance instructions.

If the problem persists after attempting these solutions, please contact a qualified electrician or the retailer for further assistance.

6. Technical Specifications

BrandGLOBO
ManufacturerGLOBO LIGHTING
Model Number109585
Product Dimensions (L x W x H)80 x 10 x 120 cm
Item Weight870 grams
ColorSilver
MaterialMetal (fixture), Plastic (lampshade)
Voltage230 Volts
Specific UsesIndoor use only
Switch StyleNo integrated switch
Batteries RequiredNo
Luminous Flux1400 lm
Power24 Watts
Color Temperature3000 K (Warm White)
Nominal Lifetime20,000 hours
DimmableNo

7. Warranty and Support

Specific warranty details for the GLOBO LED Pendant Light, Model 109585, are not provided in this manual. For warranty information, please refer to the documentation included with your purchase, contact the retailer where the product was purchased, or visit the official GLOBO website.

Information regarding the availability of spare parts for this product is currently unavailable.

For technical support or inquiries, please contact your point of purchase or the manufacturer directly through their official channels.

© 2024 GLOBO. All rights reserved. This manual is for informational purposes only.

Related Documents - 109585

Preview GLOBO 12398-24S/24W LED Ceiling Light - 3-Step CCT Selectable
Information about the GLOBO 12398-24S and 12398-24W LED ceiling light, featuring a 3-step switch for selecting color temperature (3000K, 4000K, 6000K) and a 24W SMD LED.
Preview GLOBO 48046D1 LED Lighting Fixture - Installation Guide
Installation instructions and product information for the GLOBO 48046D1 LED lighting fixture. Details on mounting, wiring, and light source specifications.
Preview GLOBO Lighting 12379 Series Ceiling Light Installation Guide and Product Information
Comprehensive guide for GLOBO Lighting's 12379 series ceiling lights, detailing installation steps, color temperature adjustment, and product specifications including energy efficiency.
Preview GLOBO Lighting Installation and Operation Guide
This document provides instructions for the installation and operation of GLOBO lighting products, including details on light source and control gear replacement, and dimming functions.
Preview GLOBO 48046D2 LED Lighting Fixture - Specifications and Information
Detailed information for the GLOBO 48046D2 LED lighting fixture, including product specifications, details on the non-replaceable light source, replaceable control gear, and manufacturer contact information.
Preview GLOBO 16064-3H LED Ceiling Light - Installation and Specifications
Detailed installation guide and technical specifications for the GLOBO 16064-3H LED ceiling light, featuring adjustable color temperature and energy efficiency information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.