TAZATA BOOMBLAST PRO Portable Bluetooth Speaker Instruction Manual

1. Safety Information

Please read all instructions carefully before using this product. Keep this manual for future reference.

• Do not expose the speaker to extreme temperatures or direct sunlight for prolonged periods.
• Avoid dropping or subjecting the speaker to strong impacts.
• Keep the speaker away from medical devices.
• Do not attempt to disassemble, repair, or modify the speaker. This will void the warranty.
• Ensure all port covers are securely closed when using the speaker near water to maintain its IPX7 waterproof rating.
• Use only the provided charging cable or a certified USB-C cable for charging.

2. What's in the Box

Verify that all items are present upon unboxing:

• 1x TAZATA BOOMBLAST PRO Bluetooth Speaker (CAMO)
• 1x Portable Strap
• 1x TAZATA BOOMBLAST PRO Quick Start Manual
• 1x USB-C Charging Cable (charger head not included)

3. Product Overview and Controls

The TAZATA BOOMBLAST PRO features intuitive controls and robust design for an optimal audio experience.

Top Panel Controls:

• M (Mode) Button: Short press to switch between AUX, USB, and Bluetooth modes. Long press and hold for 2 seconds to disconnect or reconnect to the last paired device. After powered on, the LED will flash when ready to pair. After pairing, the LED will keep lighting on.
• Play/Pause Button: Short press to play or pause music. Long press and hold for 5 seconds to clear pairing information and restore default volume with a prompt sound. It will automatically shut down. Double press when the phone's Bluetooth is connected to quickly call back the last call made by the phone.
• - (Volume Down/Previous Track): Short press for volume down. Long press for the previous song. In AUX mode, long press will reduce the volume.
• + (Volume Up/Next Track): Short press for volume up. Long press for the next song. In AUX mode, long press will increase the volume.
• EQ (Equalizer/Light) Button: Short press to cycle through different light effects. Double press to switch EQ modes.
• Power Button: Long press and hold for 2 seconds to power on/off. Short press to turn on/off broadcasting in powered on mode. Reset: long press and hold for 10 seconds to reset the speaker if it's crashed (it will shut down).

Rear Ports:

• USB-C Charging Port: For charging the speaker.
• USB Port (USB-A): For connecting USB devices, also functions as a power bank output.
• AUX Port: For wired audio input using a 3.5mm audio cable.

4. Setup

4.1 Initial Charging

Before first use, fully charge the speaker. Connect the provided USB-C charging cable to the speaker's USB-C port and to a compatible USB power adapter (not included). The battery indicator lights will show charging progress. A full charge takes approximately 3 hours.

4.2 Powering On/Off

Long press the Power Button for 2 seconds to turn the speaker on or off.

5. Operating Instructions

5.1 Bluetooth Pairing

1. Ensure the speaker is powered on and the LED light is flashing, indicating it's in pairing mode.
2. On your mobile device, enable Bluetooth and search for "TAZATA BOOMBLAST PRO" in the list of available devices.
3. Select the speaker to connect. A confirmation sound will indicate successful pairing, and the LED light will remain solid.
4. To disconnect, long press the M (Mode) Button for 2 seconds.

5.2 AUX Mode

Connect a 3.5mm audio cable from your audio source to the AUX port on the speaker. The speaker will automatically switch to AUX mode. Use the volume controls on the speaker or your device to adjust audio levels.

5.3 Multi-Speaker Pairing (Broadcast Mode)

For an immersive audio experience, you can wirelessly link multiple TAZATA BOOMBLAST PRO speakers.

1. Ensure all speakers are powered on and not connected to any Bluetooth device.
2. On the primary speaker, short press the Power Button to enter Broadcast Mode (indicated by a specific light pattern).
3. On secondary speakers, short press the Power Button to join the Broadcast Mode. They will automatically connect to the primary speaker.
4. Connect your device to the primary speaker via Bluetooth. All linked speakers will play synchronized audio.

5.4 LED Light Modes

The speaker features pulsing LED lights on its passive radiators. Short press the EQ (Equalizer/Light) Button to cycle through different light effects. Double press to switch EQ modes.

5.5 Power Bank Function

The built-in 5000mAh battery can also charge your mobile devices. Connect your device's charging cable to the USB-A port on the speaker to begin charging.

6. Maintenance

• Cleaning: Wipe the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
• Waterproof Care: Always ensure the rubber flap covering the charging and AUX ports is securely closed to maintain the IPX7 waterproof rating.

7. Troubleshooting

8. Specifications

9. Warranty Information

This TAZATA product comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty card included in your package or contact customer support.

10. Customer Support

For any questions, technical assistance, or warranty claims, please contact the Tazata Store directly through your Amazon order page or visit the official Tazata website.

The Tazata Store is committed to providing advanced, affordable, and reliable wireless audio equipment.