AUTO-GETHER 39085565 D5502 Electric Tailgate Support L Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your AUTO-GETHER 39085565 D5502 Electric Tailgate Support L. Please read this manual thoroughly before installation and use to ensure proper function and safety. This electric tailgate support is designed to assist in the automatic opening and closing of your vehicle's tailgate, enhancing convenience and functionality.

Safety Information

Important Safety Precautions:

• Always disconnect the vehicle's battery before beginning any electrical installation to prevent electrical shock or damage.
• Ensure the vehicle is parked on a level surface with the parking brake engaged.
• Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
• If you are unsure about any part of the installation process, consult a qualified automotive technician.
• Verify the correct part number for your vehicle by providing your car's VIN before installation. Incorrect parts can lead to malfunction or damage.
• Keep hands and clothing clear of the tailgate mechanism during operation to avoid injury.

Package Contents

Your package should contain the following items:

• 1 x AUTO-GETHER 39085565 D5502 Electric Tailgate Support L

Image 1: The AUTO-GETHER 39085565 D5502 Electric Tailgate Support L, showing its full length and integrated wiring.

Installation Instructions

Before You Begin:

• Confirm this part is compatible with your vehicle model and year. Providing your car's VIN to the supplier before purchase is recommended to ensure correct fitment.
• Gather necessary tools (e.g., wrenches, screwdrivers, trim removal tools, multimeter).
• Park the vehicle on a flat surface and engage the parking brake.
• Disconnect the negative terminal of the vehicle's battery.

Step-by-Step Installation:

1. Access the Tailgate Support: Carefully open the tailgate and identify the location of the existing tailgate support. You may need to remove interior trim panels to access the mounting points and wiring.
2. Disconnect Wiring: Locate the electrical connector attached to the existing tailgate support. Disconnect it carefully.
   

   Image 2: Detailed view of the electrical connector, which needs to be disconnected during removal and connected during installation.

3. Remove Old Support: Using appropriate tools, unbolt or unclip the old tailgate support from its upper and lower mounting points. Be prepared to support the tailgate manually once the support is removed.
4. Install New Support: Position the new AUTO-GETHER electric tailgate support. Attach the upper mounting point first, then the lower mounting point. Ensure all bolts are tightened to the manufacturer's specifications.
   

   Image 3: The new tailgate support with its integrated wiring harness, ready to be mounted and connected.

   

   Image 4: Close-up view of the robust mounting ends of the electric tailgate support, designed for secure attachment.
5. Connect Wiring: Connect the electrical connector of the new tailgate support to the vehicle's wiring harness. Ensure a secure connection.
6. Reinstall Trim: Reinstall any trim panels that were removed during the process.
7. Reconnect Battery: Reconnect the negative terminal of the vehicle's battery.

Post-Installation Check: After installation, test the tailgate operation carefully to ensure it opens and closes smoothly and correctly. Listen for any unusual noises.

Operating Instructions

The AUTO-GETHER Electric Tailgate Support L is designed to integrate with your vehicle's existing automatic tailgate system. Operation typically involves:

• Opening: Pressing the tailgate release button on your key fob, inside the vehicle, or on the tailgate itself will activate the electric support to open the tailgate automatically.
• Closing: Pressing the tailgate close button (usually located on the tailgate or inside the vehicle) will activate the electric support to close the tailgate automatically.
• Obstruction Detection: The system is typically equipped with an obstruction detection feature. If the tailgate encounters an obstacle during closing, it should automatically reverse direction to prevent injury or damage. Do not intentionally obstruct the tailgate.

Refer to your vehicle's owner's manual for specific instructions on operating your automatic tailgate system.

Maintenance

The AUTO-GETHER Electric Tailgate Support L is designed for long-term reliability with minimal maintenance. However, regular inspection is recommended:

• Visual Inspection: Periodically check the tailgate support for any signs of physical damage, corrosion, or loose connections.
• Cleanliness: Keep the support rod and mounting areas clean from dirt, debris, and excessive moisture.
• Lubrication: No specific lubrication is typically required for sealed electric tailgate supports. Do not apply lubricants unless specified by the vehicle manufacturer.

Troubleshooting

If you experience issues with your electric tailgate support, consider the following common troubleshooting steps:

For issues not resolved by these steps, please contact AUTO-GETHER customer support or a certified automotive service center.

Specifications

Warranty and Support

For any questions regarding your AUTO-GETHER Electric Tailgate Support L, or if you require technical assistance, please contact AUTO-GETHER customer support.

While specific warranty details are not provided in this manual, it is recommended to retain your purchase receipt for any warranty claims. Please refer to the seller's return policy for information on returns and replacements.

• Contact Information: Please refer to your purchase documentation or the AUTO-GETHER brand store on Amazon for current contact details.
• Return Policy: The seller offers a 30-day return policy for this product.