Product Overview
This manual provides detailed instructions for the operation and maintenance of your Kenneth Cole REACTION Men’s Digital Watch. This timepiece features a multi-function digital display, chronograph capabilities, and a durable design suitable for daily wear.
Image: Front view of the Kenneth Cole REACTION Men's Digital Watch, showcasing its blue LCD dial, gunmetal-tone case, and blue silicone strap.
The watch is designed for active daily wear, combining modern aesthetics with practical functionality. It includes features such as time, day, date, and an alarm, all displayed on a clear digital interface.
Setup
1. Initial Inspection
Upon unboxing, inspect the watch for any visible damage. Ensure all protective films are removed from the display and case back.
2. Setting Time and Date
Your watch features four control buttons: LIGHT (top left), MODE (bottom left), START (top right), and RESET (bottom right).
Image: Left side of the watch, highlighting the 'LIGHT' button at the top and 'MODE' button at the bottom.
Image: Right side of the watch, highlighting the 'START' button at the top and 'RESET' button at the bottom.
- Press the MODE button repeatedly until the time setting mode is displayed (usually indicated by flashing digits).
- Use the RESET button to select the digit you wish to adjust (hours, minutes, year, month, day).
- Use the START button to increase the value of the selected digit.
- Once all settings are correct, press the MODE button again to exit the setting mode.
3. Strap Adjustment
The blue silicone strap is designed for comfort and a secure fit. Adjust the buckle to the desired tightness on your wrist. Ensure it is snug but not uncomfortably tight.
Operating Instructions
1. Time Display
In normal time mode, the watch displays the current time (hours, minutes, seconds), day of the week, and date (month, day).
2. Chronograph (Stopwatch) Function
- From normal time mode, press the MODE button once to enter Chronograph mode. The display will show "00:00:00".
- Press the START button to begin timing.
- Press the START button again to pause timing.
- Press the RESET button to reset the chronograph to "00:00:00".
- Press the MODE button to return to normal time mode.
3. Alarm Function
- From normal time mode, press the MODE button twice to enter Alarm mode. The alarm time will be displayed.
- Press the RESET button to toggle the alarm ON/OFF.
- To set the alarm time, press the START button to adjust the hours, then press RESET to move to minutes, and use START to adjust.
- Press the MODE button to confirm and exit Alarm setting.
4. Light Function
Press the LIGHT button (top left) to illuminate the display for easy viewing in low-light conditions. The light will remain on for a few seconds.
Maintenance
1. Cleaning Your Watch
Regularly wipe the watch case and strap with a soft, damp cloth. For the silicone strap, mild soap and water can be used. Ensure the watch is dry before wearing.
2. Water Resistance
This watch is rated for 3 ATM (30 meters) water resistance. This means it is suitable for everyday use and can withstand splashes or brief immersion in water. It is not suitable for swimming, showering, or diving.
- Do not operate buttons when the watch is wet.
- Avoid exposing the watch to hot water or steam, as this can compromise the water seals.
3. Battery Replacement
The watch is powered by 1 Lithium Metal battery (included). When the display dims or functions become erratic, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and water resistance.
4. Storage
When not in use, store your watch in a cool, dry place away from direct sunlight and extreme temperatures. Avoid storing it near strong magnetic fields.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or dim. | Low or dead battery. | Replace the battery (professional service recommended). |
| Buttons are unresponsive. | Watch may be in a locked mode or internal issue. | Try pressing all buttons firmly. If issue persists, consult support. |
| Time/Date is incorrect. | Needs to be reset or battery is low. | Follow "Setting Time and Date" instructions. If problem recurs, replace battery. |
| Condensation inside display. | Exposure to extreme temperature changes or compromised water seal. | Avoid extreme temperature changes. If condensation persists, seek professional repair immediately to prevent damage. |
Specifications
- Model Number: KRWGP7005502
- Product Dimensions: 9.45 x 1.85 x 0.57 inches; 3.46 ounces
- Item Width: 47 millimeters
- Clasp Type: Buckle
- Batteries: 1 Lithium Metal battery (included)
- Manufacturer: ILG Asia Limited
- Water Resistance: 3 ATM (30 meters)
- Display Type: Digital LCD
- Functions: Time, Day, Date, Alarm, Chronograph, Light
Warranty and Support
Warranty Information
For specific warranty details, please refer to the warranty card included with your purchase or visit the official Kenneth Cole REACTION website. The manufacturer provides a warranty against defects in materials and workmanship under normal use.
Customer Support
If you encounter any issues not covered in this manual or require further assistance, please contact Kenneth Cole REACTION customer support. You can find contact information and additional resources on the official brand store page: