GPEESTRAC Cordless Tire Inflator Portable Air Compressor, Dual Mode Inflation, Auto Air Pump for Car Tires, Motorcycle, Bikes User Manual

1. Introduction

This user manual provides essential information for the safe and efficient operation of your GPEESTRAC Cordless Tire Inflator Portable Air Compressor, Dual Mode Inflation, Auto Air Pump for Car Tires, Motorcycle, Bikes. Please read this manual thoroughly before using the device and retain it for future reference.

Figure 1.1: GPEESTRAC Cordless Tire Inflator and its accessories, demonstrating its wide range of applications.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the device:

• Do not operate the inflator in wet conditions or near flammable liquids/gases.
• Keep out of reach of children.
• Ensure the correct pressure setting for the item being inflated to prevent over-inflation.
• Do not leave the inflator unattended during operation.
• Disconnect the power source when not in use or before cleaning.
• Use only manufacturer-approved accessories.

3. Package Contents

Verify that all items are present in the package:

• Cordless Tire Inflator Unit
• Inflation Hose
• Various Nozzle Adapters (e.g., Presta valve adapter, ball needle, swimming ring nozzle)
• USB Charging Cable
• 12V Car Power Cord
• Storage Bag
• User Manual (this document)

4. Product Features

The GPEESTRAC Cordless Tire Inflator offers the following key features:

• Fast and Efficient Inflation: Equipped with a powerful motor that delivers rapid airflow, this inflator can pump up an average car tire to 29-35psi in just about a minute.
• Robust Voltage Battery: Featuring a high-voltage battery, just one charge is enough to inflate 12 car tires sized 195/65/R15 to 29-35psi. This tire inflator offers dual modes of operation: use the embedded battery for ease, or with the included 12v outlet power cord.
• Precision Display & Automatic Shut Off: This tire inflator comes with a high-precision pressure sensor and an LED display for effortless monitoring and operation. It automatically shuts off when the tire hits the preset pressure, preventing over-inflation.
• User-Friendly: With four preset modes, operation is straightforward. It’s designed for cars, bicycles, motorcycles, and sporting equipment, catering to a variety of inflation needs. Easily switch between PSI, BAR, KPA, and kg/cm² with one button, enhanced by a tire pressure memory feature for streamlined operation.
• Portable Design: The tire inflator’s compact wireless design makes it extremely portable. Included is a storage bag for convenient placement in a car, on a bike rack, or in a backpack—perfect for both travel and home use. This inflator comes packed with multiple attachments, essential for drivers, cyclists, and adventurers alike. It also includes an LED emergency light to aid in tire inflation and visibility in dark conditions.

Figure 4.1: Enhanced motor design for faster and more efficient inflation.

Figure 4.2: The inflator's integrated LED flashlight and power bank functionality.

5. Setup

5.1 Charging the Device

Before first use, fully charge the inflator's internal battery using the provided USB charging cable. Connect the USB cable to a compatible USB power adapter (not included) or a computer USB port. The LED display will indicate charging status.

5.2 Power Connection Options

The inflator can be powered in two ways:

1. Cordless Mode: Use the built-in rechargeable battery for maximum portability. Ensure the battery is sufficiently charged.
2. Wired Mode: For continuous operation or when the battery is low, connect the provided 12V car power cord to your vehicle's cigarette lighter socket.

Figure 5.1: Illustration of the two power connection options: cordless and 12V wired mode.

6. Operating Instructions

6.1 Preparing for Inflation

1. Connect the inflation hose to the inflator's air outlet.
2. Select the appropriate nozzle adapter for the item you wish to inflate (e.g., Schrader valve for car tires, Presta valve adapter for some bicycles, needle for sports balls).
3. Attach the nozzle adapter firmly to the item's valve.

6.2 Setting Desired Pressure

1. Turn on the inflator. The LED display will show the current pressure.
2. Press the "Mode" button to cycle through the four preset modes (Car, Motorcycle, Bicycle, Ball) or to manually adjust the pressure.
3. Use the "+" and "-" buttons to set your desired target pressure. Refer to your vehicle's manual or the item's specifications for recommended pressure.
4. Press the "Unit" button to switch between PSI, BAR, KPA, and kg/cm².

6.3 Starting and Stopping Inflation

1. Once the desired pressure is set, press the "Start/Stop" button to begin inflation.
2. The inflator will automatically stop when the target pressure is reached.
3. To manually stop inflation at any time, press the "Start/Stop" button again.
4. Carefully disconnect the hose from the valve.

Figure 6.1: The inflator's fast inflation capability and automatic shut-off feature.

Figure 6.2: Versatile application of the tire inflator for various items.

7. Maintenance

• Cleaning: Wipe the exterior of the inflator with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the inflator and its accessories in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Battery Care: For optimal battery life, charge the device at least once every three months if not used regularly.
• Hose and Nozzles: Inspect the inflation hose and nozzle adapters regularly for any signs of wear or damage. Replace if necessary.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Fleaks Funly store on Amazon:

Fleaks Funly Amazon Store

Please have your product model (B0F3JGXCWH) and purchase date ready when contacting support.