OEMIRY OM-ROF03-ALK Alkaline Filter Cartridge User Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your OEMIRY OM-ROF03-ALK Replacement Cartridge Alkaline Filter. This filter is designed to restore the natural alkalinity and mineral balance of water within a UV Reverse Osmosis System, enriching it with essential minerals like calcium, magnesium, and potassium.

2. Safety Information

Please read all safety instructions carefully before installing or operating the filter cartridge. Failure to follow these instructions may result in property damage or injury.

• Ensure the water supply is turned off before attempting any installation or replacement procedures.
• Use appropriate tools and follow all local plumbing codes.
• Do not use the filter with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
• Keep the filter cartridge away from direct sunlight and extreme temperatures.
• Dispose of used filter cartridges according to local regulations.

3. Product Overview

The OEMIRY OM-ROF03-ALK is an alkaline composite filter designed to enhance the quality of water processed by a UV Reverse Osmosis system. It is part of an 8-stage filtration process that effectively removes contaminants and improves water taste.

Figure 3.1: OEMIRY OM-ROF03-ALK Alkaline Filter Cartridge. This image shows the cylindrical filter cartridge with blue caps on both ends, indicating its design for easy integration into compatible systems.

Key Features:

• Alkaline Composite Filter: Restores natural alkalinity and mineral balance, enriching water with calcium, magnesium, and potassium for a higher pH level.
• 8-Stage Effective Filtration: When used as part of the complete OEMIRY RO system, it contributes to the removal of over 99.99% of contaminants including TDS, fluoride, nitrates/nitrites, PFAS/PFOA/PFOS, heavy metals (lead, arsenic), microplastics, and chloride.
• Extended Service Life: Designed for 12-24 months of use, depending on local water quality, reducing the frequency of replacements.

Figure 3.2: Illustration of PH+ Alkaline Water Benefits. This image highlights how the alkaline filter enriches water with essential minerals like calcium and magnesium, leading to a higher pH level (7.5-8.5) and improved taste, while removing heavy metals, solids, chlorine, and odor.

Figure 3.3: Diagram of UV Sterilizer. This image illustrates the UV sterilization component within the OEMIRY system, showing how it effectively removes over 99.99% of algae and other microorganisms from the water.

4. Setup and Installation

This section outlines the general steps for installing the OM-ROF03-ALK alkaline filter cartridge into a compatible OEMIRY UV Reverse Osmosis System. Refer to your main RO system's manual for detailed installation instructions.

Installation Steps:

1. Prepare the System: Turn off the main water supply to your RO system and depressurize the system by opening the RO faucet.
2. Identify the Alkaline Filter Slot: Locate the alkaline filter slot within your OEMIRY OM-ROF03 RO system. This is typically labeled "ALK".
3. Remove Old Filter (if applicable): Twist the old alkaline filter cartridge counter-clockwise to unlock and remove it. Be prepared for some residual water to drain.
4. Insert New Filter: Align the new OM-ROF03-ALK filter cartridge with the slot. Push it in firmly and twist clockwise until it locks securely into place.
5. Check for Leaks: Slowly turn on the main water supply to the RO system. Check all connections for any leaks. If leaks occur, turn off the water, re-seat the filter, and re-tighten connections.
6. Flush the System: Allow water to run through the RO faucet for at least 10-15 minutes to flush out any carbon fines or air from the new filter. This is crucial for optimal performance and taste.

Figure 4.1: OEMIRY RO System Installation Diagram. This image illustrates a complete OEMIRY RO system installed under a kitchen sink, showing the flow of water purification and waste water, and the position of the filter cartridges, including the alkaline filter.

5. Operating Instructions

Once installed, the OM-ROF03-ALK alkaline filter operates automatically as part of your OEMIRY UV Reverse Osmosis System. Simply open your dedicated RO faucet to dispense purified, alkaline water.

• Ensure the RO system is powered on (if applicable to your specific model).
• Open the RO faucet to obtain purified water. The system will automatically filter water as needed.
• For optimal taste and performance, avoid letting the system sit unused for extended periods. If unused for more than a few days, flush the system for 2-3 minutes before consumption.

6. Maintenance

Regular maintenance, primarily filter replacement, is crucial for ensuring the continued high performance and longevity of your OEMIRY RO system and the OM-ROF03-ALK alkaline filter.

Filter Replacement:

The OM-ROF03-ALK alkaline filter cartridge has an extended service life of 12-24 months. The actual replacement interval may vary based on your local water quality and usage volume. It is recommended to replace the filter when you notice a significant decrease in water flow, a change in taste, or at the recommended interval, whichever comes first.

Figure 6.1: Water Filter Cartridge Service Time. This image indicates a typical service life of 12 months for the replacement filter, emphasizing that actual filter life may vary based on water conditions and usage.

Figure 6.2: Easy Replacement of Internal Water Filter. This image shows the simple 3-second twist-and-replace mechanism for the internal filter cartridges, including the alkaline filter, within the OEMIRY OM-ROF03 system.

Steps for Replacement:

1. Turn off the water supply to the RO system.
2. Open the RO faucet to relieve pressure.
3. Twist the old OM-ROF03-ALK filter cartridge counter-clockwise to remove.
4. Insert the new filter cartridge, aligning it correctly, and twist clockwise until it clicks into place.
5. Slowly turn on the water supply and check for leaks.
6. Flush the system for 10-15 minutes to prepare the new filter for use.

7. Troubleshooting

This section addresses common issues you might encounter with your alkaline filter or the overall RO system. For more complex issues, refer to your main RO system manual or contact customer support.

8. Specifications

9. Warranty and Support

OEMIRY is dedicated to providing world-class quality water filtration solutions. If you are not satisfied with your purchase or have any concerns regarding your filter, please contact our trained water specialists.

For customer support, please visit the official OEMIRY website or contact the seller directly through your purchase platform. Please have your model number (OM-ROF03-ALK) and purchase details ready when contacting support.