DFHXALH Posit00961

DFHXALH Replacement for Broan SV21413 Appliance LED Module User Manual

Model: Posit00961

1. Introduction

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of the DFHXALH Replacement for Broan SV21413 Appliance LED Module. This product is designed as a direct replacement part for the specified Broan appliance LED module. Please read this manual thoroughly before proceeding with installation or use.

2. Safety Information

  • Disconnect Power: Always ensure the appliance's power supply is completely disconnected at the circuit breaker before attempting any installation, removal, or maintenance. Failure to do so can result in electric shock or injury.
  • Professional Installation: If you are unsure about any step of the installation process, it is recommended to consult a qualified electrician or appliance repair technician.
  • Handle with Care: LED modules contain delicate electronic components. Handle the module carefully to avoid damage.
  • Compatibility: Ensure this replacement module is compatible with your specific appliance model before installation. Refer to your appliance's original manual for compatibility details.

3. Package Contents

Verify that all items are present and undamaged upon opening the package:

  • 1 x DFHXALH Replacement for Broan SV21413 Appliance LED Module

4. Setup and Installation

Follow these steps to replace the existing LED module in your appliance:

  1. Disconnect Power: Locate the circuit breaker for your appliance and turn off the power supply completely. Confirm that the appliance is no longer receiving power.
  2. Access the Module: Refer to your appliance's original instruction manual to locate and access the existing Broan SV21413 LED module. This may involve removing covers, grilles, or other components.
  3. Disconnect Old Module: Carefully disconnect the electrical connector from the old LED module. Note its orientation if necessary.
  4. Remove Old Module: Unfasten and remove the old LED module from its mounting position.
  5. Install New Module: Position the DFHXALH Replacement LED Module in the same location as the old module. Secure it using the original fasteners or mounting method.
  6. Connect New Module: Connect the electrical connector from the appliance to the new DFHXALH LED module. Ensure a firm and secure connection.
  7. Reassemble Appliance: Replace any covers, grilles, or components that were removed to access the module.
  8. Restore Power: Return to the circuit breaker and restore power to the appliance.
  9. Test Functionality: Activate the light function on your appliance to confirm that the new LED module is operating correctly.
DFHXALH Replacement for Broan SV21413 Appliance LED Module

Figure 1: DFHXALH Replacement for Broan SV21413 Appliance LED Module. This image displays the DFHXALH Replacement for Broan SV21413 Appliance LED Module. It features a circular LED light unit, approximately 2 inches in diameter, with multiple small yellow LED chips arranged in a ring around a central, larger yellow LED chip. The unit is housed in a silver-colored metal casing. A black insulated wire extends from the back of the LED unit, connecting to a small, light gray rectangular electrical connector.

5. Operating Instructions

The DFHXALH Replacement LED Module operates in conjunction with your appliance's existing lighting controls. Once properly installed, the LED module will illuminate when the appliance's light function is activated (e.g., by pressing the light button on a range hood or oven).

6. Maintenance

The LED module requires minimal maintenance. To ensure optimal performance and longevity:

  • Cleaning: If the module's surface becomes dusty or dirty, gently wipe it with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the LED components or casing.
  • Inspection: Periodically inspect the module and its connections for any signs of wear, damage, or loose connections.

7. Troubleshooting

If you encounter issues with your DFHXALH Replacement LED Module, refer to the following common problems and solutions:

Problem Possible Cause Solution
LED module does not light up.
  • No power to the appliance.
  • Loose or incorrect electrical connection.
  • Faulty module (rare).
  • Appliance light switch/control issue.
  • Check appliance power supply and circuit breaker.
  • Ensure the module is securely connected.
  • Verify the appliance's light switch/control is functioning.
  • If all else fails, contact support.
LED module flickers.
  • Loose electrical connection.
  • Incompatible dimmer (if applicable).
  • Check and secure all electrical connections.
  • Ensure any dimmer switch used is compatible with LED lighting.

8. Specifications

  • Manufacturer: DFHXALH
  • Part Number: Posit00961
  • Item Model Number: Posit00961
  • ASIN: B0F3DPM2C3
  • First Available Date: April 2, 2025
  • Compatibility: Direct replacement for Broan SV21413 Appliance LED Module

9. Support

For further assistance, technical support, or inquiries regarding this product, please contact the seller or manufacturer directly through your purchase platform. Provide your order details and a clear description of the issue for prompt service.

© 2025 DFHXALH. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.