KingChii Upgrade 70L Temperature & Humidity Control Cabinet Instruction Manual

Introduction

Thank you for choosing the KingChii Upgrade 70L Temperature & Humidity Control Cabinet. This appliance is designed to provide an optimal and stable environment for storing your cigars, ensuring their quality and longevity. Please read this manual thoroughly before operation to ensure proper use and maintenance.

Image: The KingChii 70L Temperature & Humidity Control Cabinet, showcasing its sleek design and glass door.

Key Features

• Precise Temperature & Humidity Control: Utilizes semiconductor electronic refrigeration technology to maintain a constant temperature range of 64-72°F and a humidity range of 60%-75%.
• 360° Air Circulation & Frost-Free: An advanced circulation system ensures even airflow throughout the unit, maintaining consistent conditions and preventing frost buildup for optimal storage.
• Spanish Cedar Wood Interior: Features high-quality Spanish cedar wood shelves and drawers. The natural aroma of cedar wood moisturizes, allows for proper breathing, removes peculiar odors, and protects your collection from drying out or molding.
• Tempered Glass Door with Touch Control: Equipped with a double-layer mirror glass door that offers heat insulation, heat resistance, and wear resistance. The integrated electronic touch screen provides fast response and easy operation for temperature and humidity adjustments.

Image: Interior view of the KingChii cabinet, highlighting the Spanish cedar wood shelves and drawers, designed for optimal cigar preservation.

Setup

Unboxing and Placement

Upon receiving your KingChii humidor, carefully remove it from its packaging. Place the unit in an open room with adequate air circulation. Avoid building it into any type of enclosure like a cabinet, as it relies on ambient air for cooling. Ensure there is sufficient space around the unit for proper ventilation.

Initial Power-On

Plug the power cord into a suitable electrical outlet. The digital display on the touch panel will illuminate, showing the current temperature and humidity settings. The unit will begin to stabilize to its default settings or the last set parameters.

Seasoning the Humidor

It is crucial to season your humidor before adding any cigars to ensure proper humidity levels and prevent damage to your collection. Follow these steps:

1. Remove all items from the humidor, including shelves and the moisture container.
2. Wipe the interior of the unit, including the cedar shelves and drawers, with a sponge or cloth dampened with distilled water. Ensure no standing water remains.
3. Fill the included moisture container (or a sponge) with distilled water. Place it inside the humidor, ensuring the water does not directly touch the wood.
4. Close the humidor door and allow it to sit for at least 24-48 hours. Monitor the hygrometer reading. The process may take up to three days.
5. Once the hygrometer reads between 65%-75% RH, your humidor is seasoned and ready for cigars.

Image: A visual guide demonstrating the seasoning process, including adding distilled water to the reservoir and allowing the humidor to stabilize.

Operating Instructions

Temperature and Humidity Adjustment

Use the electronic touch screen on the door to adjust the desired temperature and humidity levels. The temperature range is 64-72°F, and the humidity range is 60%-75% RH. Press the up/down arrows to set your preferred values. The display will flash while adjusting and then lock in the new setting.

Image: Close-up of the smart touch control panel on the humidor door, showing temperature and humidity settings.

Interior Lighting

The humidor features soft interior LED lighting. Use the light button on the touch panel to turn the lights on or off. This allows for easy viewing of your cigar collection.

Image: The interior of the humidor illuminated by energy-saving LED lights, showcasing cigars on cedar shelves.

Maintenance

Cleaning

Regularly wipe the interior of the humidor with a clean, damp cloth (using distilled water) to prevent dust buildup and maintain hygiene. The double-layer mirror glass door is wear-resistant and easy to clean with a soft cloth.

Humidification Refill

Monitor the water level in the moisture container. Refill with distilled water as needed to maintain the desired humidity range. Ensure the water does not directly contact the cedar wood.

Image: A hand refilling the water reservoir in the humidor, illustrating the humidification maintenance process.

Troubleshooting

• Humidity Too High: If the hygrometer reads above 75% RH, remove the moisture container and expose it to air to allow some water to evaporate.
• Humidity Too Low: If the hygrometer reads below 60% RH, refill the moisture container with distilled water.
• Temperature Not Stable: Ensure the unit is placed in an open area with good air circulation and not enclosed in a cabinet. Verify that the vents are not blocked.
• Unit Not Powering On: Check the power cord connection and ensure the outlet is functioning correctly.

Specifications

Image: Detailed dimensions and internal layout of the KingChii 70L Temperature & Humidity Control Cabinet.

Warranty and Support

For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official KingChii website. Keep your purchase receipt as proof of purchase for any warranty claims.

Product Video