Oreeth TM002
Oreeth IPL Laser Hair Removal Device User Manual
Model: TM002
1. Introduction
Thank you for choosing the Oreeth IPL Laser Hair Removal Device. This device utilizes advanced Intense Pulsed Light (IPL) technology with an ice-cooling contact feature to provide a safe, effective, and nearly painless solution for long-lasting hair reduction in the comfort of your home. Please read this manual thoroughly before first use to ensure proper operation and optimal results.

The Oreeth IPL Laser Hair Removal Device, featuring a sleek rose gold and white design, with ice cubes illustrating its cooling technology.
2. Important Safety Information
2.1 General Safety Guidelines
- NOT SUITABLE for tattooed skin, skin diseases, sunburned skin, scalp, or eyebrows.
- NOT SUITABLE for injured skin or during pregnancy.
- Ensure your skin is clean after shaving before using the device.
- It is recommended to apply aloe vera gel after treatment in case of skin irritation.
- Always wear the provided IPL goggles to protect your eyes during the entire process.
- Perform a test patch on a small area of skin 24 hours before full treatment to check for adverse reactions.
2.2 Skin Tone and Hair Color Suitability
The effectiveness and safety of IPL hair removal depend on your skin tone and hair color. This device works best on light to medium skin tones with dark hair. It is not suitable for very dark skin tones or very light hair colors (white, grey, red, light blonde) as the IPL technology targets melanin in the hair follicle.

This chart illustrates suitable skin tones and hair colors for IPL treatment. Green checkmarks indicate suitability, while red crosses indicate it is not recommended.
3. Product Features
- Painless & Effective: Advanced IPL technology with 45°F ice-cooling contact ensures comfortable and effective hair removal sessions. Clinical trials show 90% of users experience zero discomfort.
- Fast Treatment: Achieve full body treatment in approximately 10 minutes with a rapid 0.8s/flash rate.
- Long-Lasting Results: 19J energy weakens hair growth, leading to visible thinning by Week 3 and smooth skin in 8 weeks for most users. 85% of users maintain results with minimal touch-ups.
- High Flash Capacity: Equipped with 999,000 flashes, providing a lifetime of use.
- Adjustable Intensity: Features 5 intensity levels, allowing customization for different body areas (e.g., Level 1 for face, Level 5 for legs).
- Compact & Corded Design: Weighing 8.8oz, its corded design ensures stable power output for consistent and faster treatments.
- Dermatologist-Tested Safety: Requires shaving first, sun avoidance, and a test patch. Includes a video guide for proper use.

This image compares the discomfort of traditional hair removal methods (120°F burning sensation) with the painless experience of the Oreeth IPL device (41°F ice-cooling).
4. How IPL Technology Works
Intense Pulsed Light (IPL) technology works by emitting broad-spectrum light that targets the melanin (pigment) in the hair follicle. The light energy is absorbed by the melanin, converting into heat, which then damages the hair follicle and inhibits future hair growth. The Oreeth device uses a clinically proven wavelength range of 600-1200nm for effective hair reduction.

A diagram showing the process of IPL hair removal: light energy is absorbed by melanin in the hair follicle, leading to hair fall and inhibited regrowth.
5. Setup Guide
5.1 Before First Use
- Shave the Area: Use the included razor to remove visible hairs from the treatment area. IPL works most effectively on hair follicles that are in the active growth phase, and shaving ensures the light energy reaches the follicle directly.
- Clean Skin: Ensure the skin is clean, dry, and free from any lotions, creams, or deodorants.
- Test Patch: Perform a test flash on a small, inconspicuous area of your skin 24 hours before your first full treatment. Observe the area for any adverse reactions like excessive redness, swelling, or blistering. If no adverse reaction occurs, proceed with treatment.

Step 1: Shave the treatment area first for optimal results.
5.2 Connecting the Device
- Connect the power adapter to the device's power input port.
- Plug the power adapter into a suitable electrical outlet. The device requires a continuous power connection during usage to ensure efficient energy output for each flash.
- Press and hold the power button for 2 seconds to turn on the device.

Step 2: Plug and Play. The device needs to be plugged in during operation.
6. Operating Instructions
6.1 Step-by-Step Usage
- Prepare Skin: Ensure the treatment area is shaved and clean.
- Power On: Connect the device to power and press the power button for 2 seconds to turn it on.
- Wear Goggles: Always wear the provided IPL goggles to protect your eyes from the intense light.
- Select Intensity Level: Press the power button briefly to cycle through the 5 intensity levels. Start with a lower level and gradually increase as your skin tolerates it.
- Activate Cooling Mode: Press and hold the cooling mode button (usually integrated with the power button, hold for 3 seconds) to activate the ice-cooling feature for maximum comfort.
- Position Device: Place the light window vertically and firmly against your skin. The device will only flash when full skin contact is detected.
- Begin Treatment: Press the flash button to emit a light pulse. For larger areas, use the auto-glide mode. For smaller, sensitive areas, use manual mode.
- Move to Next Area: After each flash, lift the device slightly and move to the next adjacent area. Avoid overlapping flashes excessively.
- Power Off: After completing your session, press and hold the power button for 2 seconds to turn off the device, then unplug it.

The easy 3-step process: 1. Shave, 2. Click (select mode/intensity), 3. Zap (apply to skin).
6.2 Treatment Modes
- Auto-Glide Mode: Ideal for larger body areas like legs, arms, and back. In this mode, the device automatically emits light pulses at regular intervals when held against the skin, allowing for continuous gliding.
- Manual Mode: Suitable for smaller, more sensitive, or contoured areas such as the bikini line, underarms, and face. In this mode, you manually press the flash button for each pulse.

Demonstration of Auto-Glide mode for large areas and Manual mode for precise treatment on smaller areas.
7. Recommended Treatment Schedule
Consistency is key for optimal results. Follow this general schedule, adjusting based on your individual hair growth and skin response:
- Initial Phase (Weeks 1-4): Treat the desired areas 2 times per week. During this phase, hair follicles are actively targeted, leading to significant hair reduction.
- Maintenance Phase (After Week 4): Once visible hair reduction is achieved, reduce treatments to 1-2 times per month or as needed to maintain results. This phase helps to keep new hair growth at bay.

The initial phase focuses on hair fall, while the maintenance phase delays re-growth.
8. Care and Maintenance
- Cleaning: After each use, ensure the device is turned off and unplugged. Use a soft, dry cloth to wipe the light window and the device body. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the device in a cool, dry place, away from direct sunlight and moisture. Keep it out of reach of children.
- Handling: Handle the device with care. Avoid dropping it or subjecting it to strong impacts.
9. Troubleshooting
9.1 Frequently Asked Questions
- How soon can the results be observed?
Most customers see visible hair reduction in 3-4 weeks. Individual results may vary depending on treatment frequency and hair type. - Is IPL hair removal suitable for everyone?
No. It is not recommended for those with tattooed or overly tanned skin, as well as for individuals with wounds or during pregnancy. Always consult the skin tone and hair color chart before using. - Is the Device Cordless?
No. To ensure efficient energy output for each flash, the device requires a power connection during usage.
10. Product Specifications
| Feature | Specification |
|---|---|
| Model Number | TM002 |
| UPC | 850074314080 |
| ASIN | B0F2DQNQC7 |
| Flash Capacity | 999,000 flashes |
| Intensity Levels | 5 levels |
| Cooling Feature | 45°F Ice-Cooling Contact |
| Power Source | Corded (requires continuous power connection) |
| Package Dimensions | 10 x 7.17 x 2.6 inches |
| Item Weight | 1.85 Pounds |
| Manufacturer | Dongguan Lide Electric Appliance Co., Ltd |
11. Warranty and Customer Support
Oreeth is committed to providing high-quality products and excellent customer service.
- Warranty: Your Oreeth IPL Laser Hair Removal Device comes with a 24-month warranty.
- Money-Back Guarantee: We offer a 60-day money-back guarantee.
- Customer Support: For any questions, concerns, or assistance, please contact our 24/7 customer support team via email. Free replacements are available for device issues.
For more information and to explore other Oreeth products, please visit the Oreeth Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.