1. Introduction
This manual provides essential information for the assembly, operation, and maintenance of your new Chairside End Table FX285. Designed for convenience and style, this table features a durable construction and a versatile design suitable for various living spaces.
Key features include a lower shelf for additional storage and display, an open C-shaped design that allows it to slide conveniently under a chair or sofa, and a countertop resistant to moisture and scratches, mimicking the look of wood with Silvershield 3D PVC laminate.
Figure 1: The Chairside End Table FX285, showcasing its brown top and sleek silver metal frame.
2. Safety Information
Please read and understand all safety instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Ensure all parts are present and undamaged before beginning assembly.
- Assemble the table on a soft, clean surface to prevent scratches.
- Do not overtighten screws during assembly, as this may damage the material.
- Place the table on a stable, level surface to prevent tipping.
- Do not exceed the recommended weight capacity for the tabletop or lower shelf.
- Keep small parts and packaging materials away from children and pets.
- Avoid placing hot items directly on the surface without protection.
3. Parts List
Before assembly, verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.
- (A) Tabletop (1 pc)
- (B) Main Frame (1 pc)
- (C) Lower Shelf (1 pc)
- (D) Connecting Bars (2 pcs)
- (E) Screws (various sizes, quantity as per assembly diagram)
- (F) Allen Wrench (1 pc)
4. Setup and Assembly
Follow these steps carefully to assemble your Chairside End Table FX285.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Identify each component using the parts list.
- Attach Connecting Bars: Secure the two connecting bars (D) to the main frame (B) using the provided screws (E) and Allen wrench (F). Ensure they are firmly attached but do not overtighten.
- Install Lower Shelf: Slide the lower shelf (C) into the designated slots on the main frame (B) and secure it with screws (E). This shelf provides additional storage and stability.
- Attach Tabletop: Carefully place the tabletop (A) onto the top of the main frame (B), aligning the pre-drilled holes. Secure the tabletop using the remaining screws (E).
- Final Tightening: Once all parts are assembled, gently tighten all screws to ensure the table is stable and secure. Do not force or overtighten.
Figure 2: Product dimensions, useful for planning placement and assembly.
Figure 3: Detail of the tabletop surface, highlighting the laminate finish.
Figure 4: Detail of the table's base and frame connections.
5. Operating Instructions
The Chairside End Table FX285 is designed for versatile use in your living space.
- Chairside Use: The C-shaped design allows the table to slide under most sofas or chairs, bringing the tabletop closer for convenient access to drinks, snacks, or remote controls.
- Serving Tray: Utilize the tabletop as a serving surface for beverages or small meals while relaxing on your sofa.
- Storage and Display: The lower shelf provides additional space for books, magazines, decorative items, or small storage bins.
- Versatile Placement: This table can function as an end table, side table, or a compact workstation in various rooms.
Figure 5: The Chairside End Table FX285 integrated into a living room setup.
6. Maintenance and Care
Proper care will extend the life and appearance of your table.
- Cleaning: Wipe the tabletop and frame with a soft, damp cloth. Avoid using harsh chemicals, abrasive cleaners, or polishes, as these may damage the finish.
- Spills: Wipe up spills immediately to prevent staining, especially on the laminate surface.
- Protection: Use coasters under drinks and placemats under hot items to protect the surface from heat and moisture rings.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration over time.
7. Troubleshooting
Refer to this section for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly. | Screws are loose; uneven floor. | Ensure all screws are tightened. Move table to a level surface or use furniture pads to stabilize. |
| Parts do not fit together. | Incorrect orientation of parts; manufacturing defect. | Review assembly instructions and diagrams carefully. If issue persists, contact customer support. |
| Scratches on surface. | Rough handling during assembly or use. | Use furniture pads or a soft cloth during assembly. For minor scratches, consider furniture repair kits. |
8. Specifications
| Brand | Generic |
| Model | FX285 |
| Product Dimensions (D x W x H) | 10"D x 18"W x 25"H |
| Color | Brown |
| Style | Modern |
| Base Type | Sled |
| Top Material Type | Iron (with Silvershield 3D PVC laminate) |
| Frame Material | Iron |
| Shape | Rectangular |
| Manufacturer | AnhuaUSA |
9. Warranty and Support
This product comes with a standard manufacturer's warranty covering defects in materials and workmanship. Please retain your proof of purchase for warranty claims.
For technical assistance, missing parts, or warranty inquiries, please contact the manufacturer or retailer where you purchased the product.
Manufacturer: AnhuaUSA
Website: www.example.com (Placeholder)
Email: support@example.com (Placeholder)
Note: Specific warranty terms and contact details may vary by region and retailer. Refer to your purchase documentation for precise information.
