Fruhdi Power Recliner Mulin Motor Actuator ML18 ML18-003D Replacement Kit User Manual

1. Product Overview

The Fruhdi Power Recliner Mulin Motor Actuator Model ML18 ML18-003D is a replacement kit designed for electric sofas, massage chairs, and seat beds. This kit is compatible with and can replace Mulin ML18-003A, ML8-205B1, Okin JLDQ12.157.333K, and Limoss 450917 motor actuators.

The kit includes the motor actuator, a power supply transformer, an AC power cord, and a 2-button 5-pin hand control remote. It is crucial to verify the compatibility and troubleshoot existing electrical components before installing this replacement kit.

Figure 1: Complete Fruhdi Power Recliner Motor Actuator Replacement Kit, showing the motor, power supply, AC cord, and hand control.

2. Setup and Installation

Before beginning installation, ensure the power to the recliner or furniture is disconnected from the main power outlet. It is recommended to have a second person assist with the installation due to the weight and size of recliner components.

2.1 Compatibility Check

Verify that your existing motor actuator model matches one of the compatible models: Mulin ML18-003A, ML8-205B1, Okin JLDQ12.157.333K, or Limoss 450917. The ML18 ML18-003D is designed as a direct replacement.

Figure 2: Close-up view of the motor actuator's label, displaying the model number ML18 ML18-003D and technical specifications for verification.

2.2 Included Components

• 1x Mulin Recliner Motor Actuator Replacement Model ML18 ML18-003D
• 1x Mulin Round 2 Button 5 Pin Switch Remote Control
• 1x Mulin Lift Chair Power Supply Replacement Transformer (Batteries not included)
• 1x Mulin 4.26 ft US Version AC Cable Cord

2.3 Installation Steps

1. Disconnect Power: Unplug the recliner from the wall outlet.
2. Access Motor: Carefully turn the recliner over or tilt it to access the existing motor actuator.
3. Remove Old Components: Disconnect the power supply, hand control, and any mounting pins or bolts securing the old motor actuator. Note the orientation and connections for reassembly.
4. Install New Motor: Secure the new ML18 ML18-003D motor actuator in place using the existing mounting points. Ensure it is firmly attached.
5. Connect Cables: Connect the new power supply to the motor actuator. Connect the new 2-button 5-pin hand control to the motor actuator. Ensure all connections are secure and correctly oriented.
6. Connect Power: Plug the AC cable into the power supply transformer, then plug the transformer into a wall outlet.
7. Test Functionality: Carefully test the recliner's movement using the new hand control.

Figure 3: Illustration of the various connectors, including the 5-pin connector for the hand control, the power input, and the AC plug, essential for correct installation.

3. Operating Instructions

The recliner's movement is controlled by the included 2-button 5-pin hand control. This control typically features two buttons for extending and retracting the recliner mechanism.

• Extend: Press and hold the 'Extend' button (usually indicated by an arrow pointing outwards or a 'recline' symbol) to move the recliner to an extended position.
• Retract: Press and hold the 'Retract' button (usually indicated by an arrow pointing inwards or an 'upright' symbol) to return the recliner to its upright position.

Release the button once the desired position is reached. The motor is designed for intermittent use, as detailed in the specifications section.

Figure 4: The motor actuator with its connected power and hand control cables, illustrating the operational setup.

4. Maintenance

Proper maintenance ensures the longevity and reliable operation of your motor actuator.

• Regular Inspection: Periodically inspect all cables and connections for signs of wear, fraying, or damage. Ensure connections remain secure.
• Cleanliness: Keep the motor and surrounding area free from dust and debris. Use a dry cloth for cleaning. Avoid using liquid cleaners directly on electrical components.
• Environmental Conditions: This product is designed for indoor use only. Avoid exposure to moisture, extreme temperatures, or direct sunlight.
• Intermittent Use: The motor has an interuptime rating of 0.5 minutes of operation followed by 4 minutes of rest. Avoid continuous operation for extended periods to prevent overheating and potential damage.

5. Troubleshooting

If your recliner is not functioning correctly, perform the following troubleshooting steps before seeking professional assistance.

• No Movement:
  • Ensure the recliner is securely plugged into a working wall outlet.
  • Check all cable connections between the motor, power supply, and hand control. Ensure the 5-pin connector is fully inserted.
  • Verify that the power supply transformer is receiving power (some transformers have an indicator light).
• Intermittent Operation:
  • Check for loose connections.
  • Ensure the motor is not overheating due to prolonged continuous use. Allow it to cool down if necessary, adhering to the interuptime specification.
• Remote Not Responding:
  • Inspect the hand control cable for any damage or kinks.
  • Ensure the 5-pin connector is firmly seated in the motor actuator.

If issues persist after performing these checks, contact the seller or manufacturer for further support.

6. Technical Specifications

7. Warranty and Support

For information regarding product warranty, please refer to the documentation provided at the time of purchase or contact the seller directly. Warranty terms and conditions may vary.

If you require technical assistance or have questions not covered in this manual, please contact Fruhdi customer support or the retailer from whom the product was purchased. Provide your model number (ML18-003D) and a detailed description of the issue for efficient support.