1. Introduction
This manual provides detailed instructions for the safe and effective operation, setup, and maintenance of your EIXAUP 17mm Pipe Inspection Camera. This system is designed for inspecting pipes, sewer lines, drains, and other hard-to-reach areas, offering clear visual feedback and recording capabilities.
2. Safety Information
- Always ensure the camera head is securely attached before use.
- Do not expose the monitor unit to water or excessive moisture. The camera head is IP68 waterproof, but the monitor is not.
- Avoid bending the cable sharply or applying excessive force, which may damage internal wiring.
- Use only the provided power adapter for charging.
- Keep the device away from extreme temperatures and direct sunlight.
- Do not attempt to disassemble or repair the unit yourself. Contact qualified service personnel.
3. Package Contents
Verify that all items are present in your package:
- 1x EIXAUP Pipe Inspection Camera System (7-inch monitor, cable reel, and frame)
- 1x 17mm Camera Head with 8 LED Lights
- 1x 32GB TF Card (pre-installed or included separately)
- 1x Screwdriver
- 2x Camera Protective Covers (for different pipe diameters)
- 1x Power Adapter
Figure 3.1: Included accessories for the EIXAUP Pipe Inspection Camera.
4. Product Overview
The EIXAUP Pipe Inspection Camera system features a 7-inch 1080P HD monitor, a 17mm IP68 waterproof camera head with 8 adjustable LED lights, and a 66 ft (20m) cable with a meter marker. It includes DVR functionality for recording video and capturing images to a 32GB TF card.
Figure 4.1: The 17mm IP68 waterproof camera head with 8 LED lights for clear imaging in dark environments.
Figure 4.2: The 7-inch 1080P HD monitor provides a clear view of the inspection area, supporting 5x digital zoom.
5. Setup
- Charge the Battery: Connect the power adapter to the monitor unit and a power outlet. Ensure the battery is fully charged before initial use.
- Install Camera Head: Carefully screw the 17mm camera head onto the end of the inspection cable until secure. Do not overtighten.
- Connect Cable to Monitor: Plug the cable connector from the reel into the designated port on the monitor unit. Ensure a firm connection.
- Insert TF Card: If not already inserted, gently push the 32GB TF card into the TF card slot on the monitor until it clicks into place.
- Power On: Press the 'CHARGER ON/OFF' button to power on the monitor.
Video 5.1: This video demonstrates the basic setup steps, including connecting the camera head and cable to the monitor unit.
6. Operating Instructions
- Power On/Off: Press the red 'CHARGER ON/OFF' button to turn the unit on or off.
- Adjust LED Lights: Use the 'LED' button to cycle through different brightness levels for the camera's 8 LED lights. This helps illuminate dark inspection areas.
- Record Video (DVR Function): Press the 'REC' button to start video recording. Press it again to stop. Recorded videos are saved to the TF card.
- Take Photos: While viewing live footage, press the 'PHOTO' button to capture a still image. Images are saved to the TF card.
- 5X Digital Zoom: Use the 'ZOOM' button to digitally zoom in on the live feed, providing a closer look at details.
- Playback Recorded Media: Press the 'PLAY' button to enter playback mode. Use the arrow buttons to navigate through recorded videos and photos.
- Menu Settings: Press the 'MENU/EDIT' button to access system settings, including time, display, and video options.
- Using the Meter Marker: The inspection cable features meter markings. Observe these markings as you feed the cable into the pipe to accurately determine the depth or distance of any identified issues.
Figure 6.1: The cable features clear meter markings to assist in precise distance measurement during inspections.
Figure 6.2: The DVR function allows for easy capture, saving, and playback of inspection videos and images.
7. Maintenance
- Cleaning the Camera Head: After each use, gently wipe the camera lens and housing with a soft, damp cloth. Ensure no debris obstructs the lens or LED lights.
- Cleaning the Monitor: Use a dry, soft cloth to clean the monitor screen. Avoid abrasive cleaners.
- Cable Care: Carefully coil the inspection cable back onto the reel after use. Avoid kinks or sharp bends.
- Storage: Store the entire system in its original case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Battery Maintenance: Recharge the battery regularly, even if not in frequent use, to prolong its lifespan.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image on screen | Cable not connected properly; Camera head damaged; Unit not powered on. | Check cable connections; Ensure unit is powered on; Contact support if camera head is suspected to be faulty. |
| Cannot record video/take photos | TF card full or not inserted; TF card faulty; Recording function not activated. | Check TF card insertion; Delete old files or replace TF card; Press 'REC' or 'PHOTO' button. |
| LED lights not working | LED brightness set to minimum; Power issue. | Press 'LED' button to increase brightness; Ensure unit is charged. |
| Unit does not power on | Battery depleted; Power button not pressed correctly. | Charge the battery; Press and hold the 'CHARGER ON/OFF' button. |
9. Specifications
- Brand: EIXAUP
- Model: B0F23D2R3K
- Screen Size: 7 Inches
- Video Capture Resolution: 1080p
- Camera Diameter: 17mm (0.67 inches)
- LED Lights: 8 Pcs adjustable
- Water Resistance Level: IP68 (Camera Head)
- Cable Length: 66 ft (20m) with Meter Marker
- Zoom Type: 5X Digital Zoom
- Media Type: Micro SD Card (32GB included)
- File Format (Video/Photo): MP4, JPEG
- Focus Type: Fixed Focus
- Sensor Type: CMOS
10. Warranty and Support
For warranty information and technical support, please refer to the product packaging or contact EIXAUP customer service directly. Keep your purchase receipt for warranty claims.