ZNENJVYB ZNENJVYB777
Fieryzeal 120W RGB Strobe Beam Moving Head Light User Manual
Model: ZNENJVYB777 | Brand: ZNENJVYB
Product Overview
The Fieryzeal 120W RGB Strobe Beam Moving Head Light is a versatile stage lighting fixture designed for professional and recreational use in various settings such as discos, clubs, KTVs, bars, banquets, weddings, family gatherings, and DJ shows. It features a powerful 120W LED light source, 8 dynamic patterns, RGB auxiliary lighting, and multiple control modes including DMX512, sound-activated, and master-slave.
Image: Front view of the Fieryzeal 120W RGB Strobe Beam Moving Head Light. The light features a black aluminum structure with a plastic shell, a prominent lens, and a digital display panel on its base for control and settings.
Safety Information
Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in injury or damage to the product.
- Ensure the power supply voltage matches the product's requirements (AC100V-240V 50/60Hz).
- Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Avoid direct eye exposure to the light source.
- Ensure proper ventilation. Do not block cooling vents.
- Install the fixture in a stable location, away from flammable materials.
- Disconnect power before cleaning or maintenance.
- This product is rated IP20; avoid exposure to water or high humidity.
Package Contents
Verify that all items listed below are included in your package:
- Stage Light (1 unit)
- Power Cable (1 unit)
- Mounting Bracket (1 unit)
- Screws (2 units)
- Instruction Manual (1 unit)
Setup and Installation
Mounting
The fixture can be mounted in various orientations (e.g., truss, floor). Use the provided mounting bracket and screws to secure the light. Ensure the mounting surface or truss can support the weight of the fixture.
Power Connection
Connect the provided power cable to the fixture's power input and then to a compatible AC power outlet (AC100V-240V 50/60Hz).
DMX Connection (Optional)
For DMX control, connect a standard DMX512 cable from your DMX controller's output to the fixture's DMX input (three-core XLR). For multiple fixtures, daisy-chain them by connecting the DMX output of one fixture to the DMX input of the next.
Operating Instructions
Control Panel
The fixture features a 4-digit digital display and control buttons (MENU, UP, DOWN, ENTER) on its base for mode selection and parameter adjustment.
- MENU: Press to cycle through main menu options.
- UP/DOWN: Use to navigate within menu options or adjust parameter values.
- ENTER: Confirm selection or save changes.
Operating Modes
The Fieryzeal Moving Head Light supports several operating modes:
- Self-propelled Mode: The fixture runs through pre-programmed light shows automatically. Select this mode via the control panel.
- Sound-Activated Mode: The light reacts to ambient sound via its built-in microphone. Adjust sensitivity if available through the menu.
- Master-Slave Mode: Connect multiple fixtures. Set one as 'Master' and others as 'Slave'. Slave units will mimic the Master's behavior.
- DMX512 Control Mode: For professional control, connect to a DMX controller. The fixture supports 9CH/11CH DMX channels. Refer to the DMX Channel Chart below for specific functions.
DMX Channel Chart (Example for 11CH)
Note: Specific DMX values and functions may vary slightly. Refer to the on-screen menu for precise channel assignments.
| Channel | Function | Value Range | Description |
|---|---|---|---|
| 1 | Pan Movement | 0-255 | 0-540° Pan movement |
| 2 | Pan Fine | 0-255 | Fine adjustment for Pan |
| 3 | Tilt Movement | 0-255 | 0-270° Tilt movement |
| 4 | Tilt Fine | 0-255 | Fine adjustment for Tilt |
| 5 | Strobe | 0-255 | Strobe speed (slow to fast) |
| 6 | Dimmer | 0-255 | 0-100% Dimming |
| 7 | Gobo/Pattern | 0-255 | Selects one of 8 patterns |
| 8 | Gobo Rotation | 0-255 | Pattern rotation speed and direction |
| 9 | Color | 0-255 | RGB auxiliary light color mixing |
| 10 | Function/Mode | 0-255 | Internal programs, sound active, reset |
| 11 | Movement Speed | 0-255 | Speed of Pan/Tilt movement |
Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your Fieryzeal Moving Head Light.
- Cleaning: Periodically clean the lens and exterior with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the fixture is powered off and cool before cleaning.
- Ventilation: Keep ventilation openings clear of dust and debris to prevent overheating.
- Storage: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a protective case.
- Inspection: Regularly check power cables, DMX cables, and mounting hardware for any signs of wear or damage.
Troubleshooting
If you encounter issues with your Fieryzeal Moving Head Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Power | Power cable disconnected; no power from outlet; faulty fuse. | Check power cable connection. Test outlet with another device. Check internal fuse (if accessible and user-replaceable, otherwise contact support). |
| No Light Output | Dimmer at 0%; fixture in blackout mode; LED failure. | Check dimmer setting (DMX or menu). Ensure fixture is not in blackout. If LED failure, contact support. |
| No DMX Control | Incorrect DMX address; faulty DMX cable; DMX controller issue; incorrect DMX mode. | Verify DMX address matches controller. Check DMX cable integrity. Test with another DMX controller. Ensure fixture is set to DMX mode. |
| Movement Issues (Pan/Tilt) | Mechanical obstruction; DMX values incorrect; motor issue. | Check for obstructions. Verify DMX Pan/Tilt values. If persistent, contact support. |
| Overheating | Blocked ventilation; high ambient temperature. | Ensure vents are clear. Operate in a well-ventilated area. |
Technical Specifications
| Feature | Specification |
|---|---|
| Product Color | Black |
| Material | Aluminum structure / Plastic shell |
| Input Voltage | AC100V-240V 50/60Hz |
| Power | 50W (Note: Product title states 120W, description states 50W. Using description's 50W for consistency with detailed specs.) |
| Light Source | 1PCS LED30W white light + 12PCS auxiliary light RGB*0.5W |
| Light Angle | 15° |
| Color Temperature | 7000K |
| Display Color Index | Ra ≥ 70 |
| Illumination | 4000Lux@5m |
| Average Lifespan | 10000H |
| Strobe Frequency | 1-20Hz (Several kinds of strobe options, 10 times per second of strobe frequency) |
| Pattern Effect | 8 patterns + Rotation + Pattern rotating color mixing + half color effect + outer aperture RGB color mixing + Color rotating |
| Pan (X-axis) | 540° (2.11°/step, fine-tuning accuracy of 0.008°) |
| Tilt (Y-axis) | 270° (1.05°/step, fine-tuning accuracy 0.004°) |
| Control Modes | Self-propelled, Sound-Activated, Master-Slave, DMX512 |
| Control Channel | 9CH/11CH |
| Protocol | Standard DMX512 protocol, RDM protocol |
| Data Connection | Three-core XLR input/output |
| Display | 4-digit digital display |
| Protection Grade | IP20 |
| Working Environment | -10℃ to 40℃ |
| Cooling Method | Constant temperature + fan |
| Effect Dimming | 0-100%, from dark to bright |
| Product Dimensions | 3"L x 2"W x 1"H (from specifications) |
| Item Weight | 14.1 ounces / 400 Grams |
Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Details regarding warranty period, coverage, and support channels are typically provided by the seller or manufacturer.
no relevant documents
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.