houscly ST-6663

houscly ST-6663 4-in-1 Cordless Handheld Vacuum Cleaner Instruction Manual

Model: ST-6663

1. Introduction

Welcome to your new houscly ST-6663 4-in-1 Cordless Handheld Vacuum Cleaner. This versatile device is designed for efficient cleaning and utility, offering vacuuming, blowing, inflating, and deflating functions. Please read this manual thoroughly before use to ensure safe and optimal operation and to maximize the lifespan of your product.

2. Package Contents

Verify that all items listed below are included in your package:

  • houscly ST-6663 Main Unit
  • Crevice Nozzle
  • Brush Nozzle
  • Flat Nozzle (for vacuuming)
  • Brush Blowing Nozzle
  • Small Blowing Nozzle
  • Large Inflation Nozzle
  • Swim Ring Inflation Nozzle
  • Metal HEPA Filter (pre-installed)
  • Spare HEPA Filter
  • USB-C Charging Cable
  • Storage Bag
  • User Manual
houscly ST-6663 4-in-1 Cordless Handheld Vacuum Cleaner and all included accessories

An image displaying the houscly ST-6663 main unit along with all its accessories: various nozzles for vacuuming, blowing, and inflating, a USB-C charging cable, two HEPA filters (one spare), and a storage bag.

3. Product Overview

Familiarize yourself with the main components of your houscly ST-6663:

  • Power Button/Mode Selector: Controls power on/off and switches between suction/blower modes.
  • Dust Cup: Collects debris during vacuuming.
  • HEPA Filter Assembly: Filters fine dust and particles.
  • Suction Port: Front opening for vacuuming and deflating.
  • Blower Port: Rear opening for blowing and inflating.
  • USB-C Charging Port: For recharging the device.
  • LED Power Indicator: Displays charging status and current power mode.
houscly ST-6663 handheld vacuum highlighting 25000Pa powerful suction

A close-up image of the houscly ST-6663 handheld vacuum in action, demonstrating its powerful 25000Pa suction with debris being pulled into the nozzle. The image also indicates three power gears for different cleaning needs.

4. Setup

4.1 Initial Charging

Before first use, fully charge the device:

  1. Connect the USB-C charging cable to the device's charging port and to a compatible USB power adapter (not included).
  2. The built-in indicator light will show red during charging and turn green when fully charged.
  3. Charging time is approximately 2 hours.

4.2 Attaching Accessories

The device supports various attachments for different functions:

For Vacuuming:

  • Attach the desired vacuum nozzle (e.g., crevice tool, brush nozzle, flat nozzle) to the suction port at the front of the main unit.

For Blowing/Inflating/Deflating:

  • Remove the dust cup assembly from the main unit.
  • Attach the appropriate blowing or inflation/deflation nozzle to the blower port at the rear of the main unit.
houscly ST-6663 4-in-1 multifunctional vacuum cleaner demonstrating vacuuming, blowing, inflating, and deflating capabilities

A composite image illustrating the four main functions of the houscly ST-6663: vacuuming car interiors, blowing dust from surfaces, inflating a swim ring, and deflating a storage bag. Various nozzles are shown in use for each function.

Video demonstrating the assembly and use of various attachments for the houscly ST-6663, including vacuuming and blowing functions.

5. Operating Instructions

5.1 Power On/Off and Mode Selection

  • To power on, press and hold the power button for 2 seconds. The device will start in Eco Mode (lowest suction/blower speed).
  • Press the power button again to cycle through modes: Standard Mode, High Speed Mode.
  • To power off, press and hold the power button for 2 seconds from any mode.

5.2 Vacuuming Mode

  • Ensure the desired vacuum nozzle is attached to the suction port.
  • Select the appropriate power mode for the cleaning task.
  • Move the nozzle over the surface to be cleaned, ensuring proper contact for effective suction.

5.3 Blowing Mode

  • Ensure the appropriate blowing nozzle is attached to the blower port.
  • Select the desired power mode.
  • Direct the airflow to clear dust, debris, or dry surfaces.

5.4 Inflating Mode

  • Attach the correct inflation nozzle to the blower port.
  • Insert the nozzle into the inflation valve of the item (e.g., swim ring, air mattress).
  • Power on the device and select the desired speed to inflate.

5.5 Deflating Mode

  • Attach the appropriate deflation nozzle to the suction port.
  • Insert the nozzle into the deflation valve of the item (e.g., vacuum storage bag).
  • Power on the device to extract air.

Video demonstrating the practical application of the houscly ST-6663 in various modes, including vacuuming car interiors, blowing dust, and inflating/deflating items.

6. Maintenance

6.1 Dust Disposal

  • To empty the dust cup, press the one-touch release button located on the dust cup assembly.
  • Dispose of collected debris into a waste bin.
  • Close the dust cup securely until it clicks.

6.2 Filter Cleaning and Replacement

  • Twist the dust cup assembly counter-clockwise to detach it from the main unit.
  • Remove the HEPA filter from the dust cup.
  • Tap the filter gently to remove loose dust. For thorough cleaning, rinse the HEPA filter under running water.
  • Ensure the filter is completely dry before reinserting it into the dust cup.
  • Replace the HEPA filter every 3-6 months, or as needed, to maintain optimal performance. A spare filter is included.
houscly ST-6663 showing metal HEPA filter, one-press emptying, and washable filter

A composite image detailing the maintenance aspects of the houscly ST-6663. It shows the dual-layer metal HEPA filter, the one-press dust disposal mechanism, and the filter being rinsed under water, emphasizing its washable and durable design.

7. Troubleshooting

ProblemPossible CauseSolution
Device does not turn onLow batteryCharge the device fully.
Device does not turn onPower button not held long enoughPress and hold the power button for 2 seconds to activate.
Weak suction/blowing powerClogged filter or dust cupEmpty dust cup and clean/replace filter.
Weak suction/blowing powerNozzle not properly attachedEnsure all attachments are securely fitted.
Short operating timeBattery not fully charged or high power mode usedFully charge the device. Use Eco Mode for extended runtime.

8. Specifications

  • Brand: houscly
  • Model: ST-6663
  • Suction Power: Up to 25,000Pa
  • Battery: 8000mAh (Up to 40 minutes runtime in Eco Mode)
  • Charging Time: Approximately 2 hours
  • Charging Port: USB-C
  • Filter Type: HEPA Filter (Washable)
  • Functions: 4-in-1 (Vacuuming, Blowing, Inflating, Deflating)
  • Wattage: 120 watts
  • Product Dimensions: 7.8"L x 2"W x 7.8"H
  • Color: Silver

9. Safety Information

  • Do not use the device to vacuum liquids, hot ashes, or sharp objects.
  • Keep the device away from water and high temperatures.
  • Do not operate the device if the filter is not properly installed.
  • Store the device in a cool, dry place.
  • Keep out of reach of children.
  • Use only the provided charging cable.
  • Do not attempt to disassemble or repair the device yourself. Contact customer support for assistance.
  • Important: If the battery drains completely during storage, it may prevent the device from turning on again. Ensure the device is charged periodically even when not in active use.

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or the official houscly website. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.