BEESHOP Professional Ultrasonic Jewelry Cleaner A6PRO User Manual

Important Safety Information

Please read all instructions carefully before using the BEESHOP Professional Ultrasonic Jewelry Cleaner A6PRO. Retain this manual for future reference.

General Safety Precautions:

• Do not immerse the main unit in water or other liquids.
• Ensure the power cord is not damaged and is properly connected to a grounded outlet.
• Keep the device out of reach of children.
• Do not operate the cleaner without liquid in the tank.
• Unplug the device when not in use or before cleaning.

Items Not Suitable for Ultrasonic Cleaning:

• Glasses with U-V coating.
• Fragile jewelry such as pearls, opals, beryl, turquoise, and coral.
• Items made of wood, leather, or fabric.

Package Contents

Verify that all items listed below are included in your package:

• BEESHOP Professional Ultrasonic Jewelry Cleaner (Main Unit) x 1
• Power Charger x 1
• Watch Holder x 1
• Cleaning Cloth x 1
• Tweezer x 1
• User Manual x 1

Product Overview

The BEESHOP A6PRO is an advanced ultrasonic cleaner designed for effective cleaning of various personal items. It features a 550ml stainless steel tank, 48kHz ultrasonic frequency, and two cleaning modes with an integrated degas function and LED lights.

Image: The BEESHOP A6PRO Ultrasonic Cleaner highlighting its 550ml capacity and suitability for cleaning items like jewelry, watches, dentures, and retainers.

Key Features:

• 48kHz Ultrasonic Frequency: Provides powerful and thorough cleaning.
• 550ml Stainless Steel Tank: Durable and suitable for multiple items.
• Advanced Degas Function: Removes air from the liquid to prevent oxidation and enhance cleaning.
• 2 LED Lights: Aids in effective removal of invisible dirt.
• Two Cleaning Modes: 5-minute and 8-minute cycles for varied cleaning needs.
• One-Touch Operation: Simple and intuitive control.

Setup Instructions

1. Placement: Place the ultrasonic cleaner on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit.
2. Power Connection: Connect the power charger to the cleaner's power input port, then plug the charger into a standard electrical outlet.

Operating Instructions

Follow these steps for effective cleaning:

Image: A visual guide demonstrating the four steps of operation: 1. Inject water, 2. Place item, 3. Add cleaning solution, 4. Connect power and press button.

1. Fill the Tank: Open the lid and fill the stainless steel tank with water. For enhanced cleaning, add a few drops of a suitable cleaning solution. Do not exceed the 'MAX' fill line.
2. Place Items: Carefully place the items to be cleaned into the tank. Ensure items are fully submerged but not overcrowded. Use the included watch holder for watches to prevent damage.
3. Select Cleaning Mode: Close the lid. The cleaner offers two modes:
   • 5-Minute Mode: Activates ultrasonic cleaning with LED lights. Ideal for quick cleaning.
   • 8-Minute Mode: Activates ultrasonic cleaning with LED lights and the degas function. Recommended for deeper cleaning and preventing oxidation.
   

   Image: Close-up of the cleaner's control panel, illustrating the two touch-sensitive buttons for selecting the 5-minute (efficient cleaning) or 8-minute (deep cleaning) modes.

4. Start Cleaning: Press the desired mode button. The cleaner will begin its cycle and automatically stop when the selected time is complete.
5. Remove Items: Once the cycle is finished, unplug the device. Carefully open the lid and use the included tweezers to remove the cleaned items. Rinse items under clean water and dry them with the provided cloth.

Understanding the Degas Function:

The advanced degas function works by exhausting air from the cleaning liquid. This process helps to prevent potential oxidation of your jewelry and improves the overall cleaning effectiveness by allowing ultrasonic waves to penetrate more efficiently.

Image: A conceptual diagram showing air bubbles being removed from the cleaning liquid during the degas mode, protecting items like rings, watches, and retainers from oxidation.

Note: The degas function operates in a cycle of 2 seconds running and 1 second stopping.

Maintenance

Cleaning the Unit:

• After each use, unplug the cleaner and empty the water from the tank.
• Wipe the inside of the stainless steel tank with a soft cloth to remove any residue.
• Clean the exterior of the unit with a damp cloth. Do not use abrasive cleaners or immerse the unit in water.
• Ensure the unit is completely dry before storing.

Storage:

Store the ultrasonic cleaner in a cool, dry place away from direct sunlight and moisture when not in use.

Troubleshooting

• Unit does not power on:
  • Ensure the power adapter is securely plugged into both the unit and a working electrical outlet.
  • Check if the power outlet is functional by plugging in another device.
• Cleaning results are unsatisfactory:
  • Ensure items are fully submerged and not overcrowded.
  • Use the 8-minute mode with the degas function for deeper cleaning.
  • Add a small amount of appropriate cleaning solution to the water.
  • For heavily soiled items, multiple cleaning cycles may be necessary.
• Unit stops unexpectedly:
  • The unit is designed to stop automatically after the selected cleaning cycle. This is normal operation.
  • If it stops prematurely, ensure the power connection is stable.

Specifications

Warranty and Support

Warranty Information:

• The BEESHOP Professional Ultrasonic Jewelry Cleaner A6PRO comes with a standard warranty, plus an additional 1-year extended warranty.
• A 30-day money-back guarantee is provided from the date of purchase.
• VIP service includes free replacement for eligible issues.

Customer Support:

For any questions, technical assistance, or warranty claims, please contact BEESHOP customer service. Online support is available 24 hours.

Please refer to the product packaging or the official BEESHOP website for the most current contact information.