JUMMICO WD0489-11
JUMMICO Dresser User Manual
Model: WD0489-11
Introduction
Thank you for choosing the JUMMICO Dresser. This wide chest of drawers is designed to provide spacious storage and a modern aesthetic for your bedroom, living room, hallway, or entryway. Its versatile design allows it to function as both a dresser and a TV stand. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure you get the most out of your new furniture.

Image: The JUMMICO Dresser in Light White, showcasing its modern design and five drawers, suitable for various room settings.
Safety Information
Your safety is paramount. Please read and follow all safety instructions carefully before assembly and use.
- Anti-Tip Device: This dresser is designed with an anti-tip device to protect family members and pets. It is crucial to install this device securely to a wall according to the assembly instructions to prevent accidental tipping.
- Weight Capacity: The top of the dresser can hold up to 101 lbs (45.8 kg). Each drawer has a load-bearing capacity of 20 pounds (9.1 kg). Do not exceed these weight limits.
- Level Surface: Always place the dresser on a flat, level surface to ensure stability.
- Children Safety: Do not allow children to climb on or play with the dresser. Keep small parts away from children during assembly.
- Proper Use: Do not stand on the dresser or use it as a step stool.

Image: An illustration emphasizing the importance of installing the anti-tip device for safety.
Components List
Before beginning assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.
Hardware (Example - refer to actual packaging for exact counts):
- Screws (various sizes)
- Dowel Pins
- Cam Locks
- Cam Bolts
- Drawer Slides
- Drawer Knobs
- Anti-tip Kit (strap, screws, anchors)
Wood Panels:
- Top Panel
- Side Panels (Left & Right)
- Bottom Panel
- Back Panel
- Drawer Fronts
- Drawer Sides & Backs
- Drawer Bottoms
Tools Required (Not Included): Phillips head screwdriver, Hammer, Drill (optional, but recommended for anti-tip device installation).
Setup and Assembly
Assembly is designed to be straightforward and typically takes 2 hours or less. Follow these steps carefully. It is recommended to assemble the dresser with two people.
- Prepare the Area: Clear a spacious, clean, and soft area (e.g., a carpeted floor) to prevent scratching the furniture during assembly.
- Identify Parts: Lay out all components and hardware. Match them with the parts list in your packaging.
- Assemble the Frame: Begin by attaching the side panels to the bottom panel using the provided hardware (e.g., cam locks and bolts). Ensure all connections are secure.
- Install Back Panel: Secure the back panel to the frame. This adds stability and squareness to the dresser.
- Attach Top Panel: Place and secure the top panel to the assembled frame.
- Assemble Drawers: For each drawer, attach the sides and back to the drawer front. Slide the drawer bottom into the grooves. Secure the drawer knobs to the front.
- Install Drawer Slides: Attach the drawer slides to both the dresser frame and the assembled drawers. Ensure they are aligned for smooth operation.
- Insert Drawers: Carefully slide each assembled drawer into its designated slot in the dresser frame.
- Install Anti-Tip Device: This is a critical safety step. Securely attach the anti-tip strap to the back of the dresser and then to a wall stud using the provided screws and anchors. Refer to the specific instructions in your hardware bag for detailed steps.

Image: Close-up details of the dresser's construction, including the 1.18" thick tabletop and specially beveled edges, which contribute to its sturdy assembly.
Operating Instructions
Using your JUMMICO dresser is simple and intuitive.
- Opening/Closing Drawers: Gently pull or push the drawer knobs to open and close the drawers. The smooth-gliding runners ensure effortless operation.
- Organizing Contents: Utilize the spacious interior of the five drawers for organizing clothes, accessories, linens, or other personal items.
- Top Surface Use: The flat top surface can be used to display decorative items, lamps, books, or as a TV stand. Ensure the weight does not exceed the specified limit of 101 lbs.
- Placement: This dresser is suitable for various rooms including bedrooms, living rooms, hallways, and entryways, helping to keep your space neat and organized.

Image: An illustration demonstrating the large storage capacity of the dresser drawers, capable of holding numerous socks, underwear, t-shirts, and jeans.

Image: The JUMMICO dresser seamlessly integrated into different home environments, including a living room, bedroom, and entryway, highlighting its versatility.
Maintenance
Proper care will extend the life and appearance of your dresser.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, as they may damage the finish.
- Spills: Clean up spills immediately to prevent staining or damage to the wood finish.
- Sunlight Exposure: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
- Humidity: Maintain a stable humidity level in the room to prevent wood from warping or cracking.
- Hardware Check: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawers do not slide smoothly. | Misaligned drawer slides or loose screws. | Check that drawer slides are correctly installed and aligned on both the drawer and the dresser frame. Tighten any loose screws on the slides. |
| Dresser wobbles or is unstable. | Uneven floor or loose assembly hardware. | Ensure the dresser is on a level surface. Check and tighten all assembly screws and bolts. Verify the anti-tip device is securely installed. |
| Parts missing or damaged upon arrival. | Shipping damage or packaging error. | Do not proceed with assembly. Contact JUMMICO customer support immediately with your purchase details for replacement parts. |
Specifications
- Brand: JUMMICO
- Model Name: Dresser for Bedroom
- Model Number: WD0489-11
- Color: Light White
- Product Dimensions (D x W x H): 14.5"D x 45.1"W x 20.9"H
- Number of Drawers: 5
- Item Weight: 82.7 pounds (37.5 kg)
- Material: Wood (Fabric Type: Wood, Finish types: Painted)
- Mounting Type: Floor Mount
- Assembly Required: Yes
- Special Feature: Space Saving, Anti-tip device included
- Top Load Capacity: Up to 101 lbs (45.8 kg)
- Drawer Load Capacity: 20 lbs (9.1 kg) per drawer
- Country of Origin: China

Image: A technical diagram illustrating the overall dimensions of the dresser (45.1" W x 20.9" H x 14.2" D) and the internal dimensions of its drawers (12.2" D x 14.3" W x 8.5" H for small, 12.2" D x 21.5" W x 8.5" H for large).
Warranty and Support
JUMMICO stands behind the quality of its products. For warranty information, missing parts, or any product-related inquiries, please contact JUMMICO customer support.
Customer Support: Refer to the contact information provided with your purchase or visit the official JUMMICO website for assistance.
Returns: This product typically offers 30-day easy returns. Please check your purchase receipt or retailer's policy for specific return details.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.