Introduction
This manual provides instructions for the proper setup, operation, and maintenance of your EOOXEKFX GKNNCCBA Kitchen Dish Brush with Storage Stand Holder. Please read this manual thoroughly before use and retain it for future reference.
Image 1: EOOXEKFX GKNNCCBA Kitchen Dish Brush with Storage Stand Holder. This image shows the complete dish brush unit, including the transparent soap reservoir, the brush head, and the integrated storage stand.
Package Contents
- 1 x Storage Stand
- 1 x Brush Head
- 1 x Transparent Main Body (Soap Reservoir)
- 1 x Silicone Top (Dispenser Button)
Image 2: The EOOXEKFX GKNNCCBA Kitchen Dish Brush and its components as received in its packaging.
Specifications
| Brand | EOOXEKFX |
| Model Number | GUOSHUA |
| Dimensions (L x W x H) | 3.5 × 3.5 × 5.1 inches (9 × 9 × 13 cm) |
| Item Weight | 0.14 Kilograms (approximately 5 ounces) |
| Handle Material | Polypropylene (PP) |
| Brush Head Material | ABS |
| Bristle Firmness | Medium |
| Recommended Surfaces | Glass, Metal, Plastic, Porcelain, Wood |
| UPC | 619704145162 |
Image 3: The dish brush with its key dimensions indicated for reference.
Setup Instructions
- Disassemble the Brush: Gently twist the silicone top counter-clockwise to separate it from the transparent main body.
- Fill with Cleaning Solution: Pour your preferred dish soap or cleaning solution into the transparent main body. The transparent design allows for easy monitoring of the soap level.
- Reassemble the Brush: Align the silicone top with the main body and twist clockwise until securely sealed.
- Place on Stand: Position the assembled dish brush onto the provided storage stand.
Image 4: A hand pouring liquid soap into the transparent reservoir of the dish brush, demonstrating the filling process.
Operating Instructions
- Dispense Soap: When ready to clean, gently press the silicone top with your thumb. This action dispenses the cleaning solution directly onto the brush head.
- Clean Surfaces: Use the brush to scrub pots, bowls, sinks, and other kitchenware. The durable ABS bristles are designed to effectively remove residue.
- Continuous Dispensing: Continue pressing the silicone top as needed to dispense more soap during cleaning.
Image 5: A hand holding the dish brush over a dirty plate, with soap dispensing onto the bristles as it is used for cleaning.
Maintenance
Cleaning the Brush
- After each use, rinse the brush head thoroughly under running water to remove any food particles or soap residue.
- Place the brush back on its storage stand to allow it to air-dry. This helps maintain hygiene and prolong the life of the bristles.
Image 6: The dish brush being rinsed under a kitchen faucet, showing water flowing through the bristles to clean them.
Replacing the Brush Head
The brush features a 3-section modular design, allowing for easy replacement of the brush head when it becomes worn.
- Remove Old Head: Twist the old brush head counter-clockwise from the bottom of the main body to detach it.
- Attach New Head: Align a new brush head with the main body and twist clockwise until it locks securely into place.
The top and middle sections of the brush are reusable, promoting an eco-friendly and cost-effective approach to maintenance.
Troubleshooting
| Problem | Possible Cause | Solution |
| Soap not dispensing or dispensing slowly. |
|
|
| Brush head feels loose or detaches. |
|
|
| Soap leaks from the reservoir. |
|
|
Warranty and Support
For warranty information or product support, please contact EOOXEKFX customer service through the retailer where the product was purchased. Please have your model number (GUOSHUA) and UPC (619704145162) available when contacting support.