yiqungo ET570
yiqungo ET570 SmartWatch Magnetic USB Charging Cable User Manual
Model: ET570
Introduction
This manual provides essential instructions for the safe and efficient use of your yiqungo ET570 SmartWatch Magnetic USB Charging Cable. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage.

Image: The ET570 SmartWatch displayed alongside its magnetic USB charging cable, illustrating the product's components.
Package Contents
- 1 x yiqungo ET570 SmartWatch Magnetic USB Charging Cable
Setup
Follow these steps to set up your charging cable:
- Connect to Power Source: Insert the USB-A end of the charging cable into a compatible USB power adapter (not included), a computer's USB port, or a power bank. Ensure the power source provides a stable 5V output.
- Prepare SmartWatch: Place your ET570 SmartWatch on a flat, stable surface.
- Attach Magnetic Connector: Bring the magnetic charging pins of the cable close to the charging contacts on the back of your ET570 SmartWatch. The magnets will automatically align and secure the connection.

Image: A detailed view of the magnetic charging pins on the cable, designed for the ET570 SmartWatch.
Operating Instructions
Once the cable is connected to both the power source and the smartwatch:
- The smartwatch display should indicate that it is charging. Refer to your ET570 SmartWatch user manual for specific charging indicators.
- A full charge typically takes approximately 2 hours.
- Once fully charged, the ET570 SmartWatch can operate for 7-10 days, depending on usage.
- The charger features a built-in chip to prevent overcharging, overheating, and short-circuits, ensuring the safety and longevity of your device.
Maintenance
To ensure the longevity and optimal performance of your charging cable:
- Cleaning: Gently wipe the cable and magnetic contacts with a dry, soft cloth to remove dust or debris. Do not use liquid cleaners.
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid bending or kinking the cable sharply.
- Handling: Always hold the plug when disconnecting the cable from the power source or smartwatch. Do not pull on the cable itself.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| SmartWatch not charging. |
|
|
| Slow charging. |
|
|
| Cable feels warm during charging. | Normal operation. | Slight warmth is normal. If the cable becomes excessively hot, disconnect it immediately and contact support. |
Specifications
- Model: ET570
- Brand: yiqungo
- Connector Type: 2-Pin Magnetic
- Compatible Devices: ET570 Smart Watch
- Special Feature: High Speed Charging, Overcharge Protection, Overheat Protection, Short-circuit Protection
- Included Components: 1pcs USB Cable
- Item Weight: 13 Grams (0.46 ounces)
- Package Dimensions: 4.72 x 2.95 x 0.59 inches
- UPC: 721545032621
Warranty Information
Specific warranty details for this product may vary. Please refer to the retailer's return policy or contact yiqungo customer support for detailed warranty information. Generally, products are covered against manufacturing defects for a limited period from the date of purchase.
Customer Support
For any questions, technical assistance, or support regarding your yiqungo ET570 SmartWatch Magnetic USB Charging Cable, please contact your point of purchase or refer to the official yiqungo website for customer service contact information.